OrbitHangar
Addon Comments
- Joined
- Apr 9, 2008
- Messages
- 3,832
- Reaction score
- 18
- Points
- 0
OHM Orbital ATK Cygnus DS2
- Thread starter OrbitHangar
- Start date
Interceptor
Well-known member
Very nice,thanks Don.
Cosmic Penguin
Geek Penguin in GTO
One nit: The old red OSC logo on the Cygnus has already been replaced with the blue Orbital ATK logo. 
Yes, you can see it in this photo of the Cygnus being encapsulated in the 4 m fairing: https://www.flickr.com/photos/nasakennedy/23183908051/One nit: The old red OSC logo on the Cygnus has already been replaced with the blue Orbital ATK logo.
IronRain
The One and Only (AFAIK)
- Joined
- Oct 11, 2009
- Messages
- 3,488
- Reaction score
- 407
- Points
- 123
- Location
- Utrecht
- Website
- www.spaceflightnewsapi.net
Thanks Don, great work as always!
barrygolden
Well-known member
Super job Don and thanks for the update
---------- Post added at 01:30 PM ---------- Previous post was at 12:25 PM ----------
Hey Don you and Brian should work together and put Cygnus in Brian's Atlas for a launch
---------- Post added at 01:30 PM ---------- Previous post was at 12:25 PM ----------
Hey Don you and Brian should work together and put Cygnus in Brian's Atlas for a launch
boogabooga
Bug Crusher
- Joined
- Apr 16, 2011
- Messages
- 3,010
- Reaction score
- 16
- Points
- 63
Mesh, animations, textures, etc. are beautiful.
However, I assume that the parameters are a placeholder?
If the actual Cygnus has 12 km/s delta-V, then it is quite enhanced indeed.
I can fix the ini for you, if you would like?
However, I assume that the parameters are a placeholder?
If the actual Cygnus has 12 km/s delta-V, then it is quite enhanced indeed.
I can fix the ini for you, if you would like?
boogabooga
Bug Crusher
- Joined
- Apr 16, 2011
- Messages
- 3,010
- Reaction score
- 16
- Points
- 63
Here, try this:
For the PMI, I assumed a perfect cylinder with Cygnus's overall dimensions and maximum mass.
I have a launch scenario as well using the Multistage2015 AtlasV that I have been working on, if one is not already in the works.
Code:
[TEXTURE_LIST]
TEX_1="Exhaust2"
[CONFIG]
MESHNAME="Orbital/CygnusEnhanced"
SIZE=6
EMPTY_MASS=6664
FUEL_MASS=828
MAIN_THRUST=450
ATTITUDE_THRUST=46.5
ISP=3140
;PMI=(15.5,22.1,7.7)
PMI=(4,4,1.16)
CROSS_SECTION=(53.0,186.9,25.9)
COG=1.47
PITCH_MOMENT_SCALE=0.00004
BANK_MOMENT_SCALE=0.00004
ROT_DRAG=(1.5,2.3,0.3)
ATT_TEX=Exhaust2
MAIN_TEX=Exhaust2
LAND_PT1=(0,-1.57,4)
LAND_PT2=(-4,-1.93,-5)
LAND_PT3=(4,-1.93,-5)
CAMERA=(-0.40,0.69,0.75)
VISIBLE=1
[EX_MAIN_0]
OFF=(0.0,0,-3.0)
DIR=(0,0,-1)
LENGTH=3
WIDTH=0.2
[DOCK_0]
POS=(0.0,0.039,3.741)
DIR=(0,0,1)
ROT=(0,1,0)
[CHILD_ATTACH_0] ; 2nd_stage
NAME="grap"
POS=(0.0,0.0,-2.585)
DIR=(0,0,-1)
ROT=(0,1,0)
LOOSE=0
ID="XS"
[CHILD_ATTACH_1] ; grapple aft
NAME="grap"
POS=(0.001,0.781,-2.748)
DIR=(0.00130028,0.220401,-0.975408)
ROT=(-0.0164503,-0.973458,-0.228275)
LOOSE=0
ID="GS"
;--------------Sequences----------------
[ANIM_SEQ_0] ; Array deploy
KEY=K
DURATION=40
PAUSE=1
[ANIM_SEQ_1] ; Array rotate
KEY=G
DURATION=10
PAUSE=1
[ANIM_SEQ_2] ; Hatch opening
KEY=1
DURATION=10
PAUSE=1
;---------------------- Animations --------------------
; STBD ARRAY
[ANIM_COMP_0]
SEQ=1
GROUPS=0
RANGE=(0.0,1)
ROT_PNT=(1.43,0.188,-2.476)
ROT_AXIS=(1,0,0)
Angle=-90
[ANIM_COMP_1]
SEQ=0
GROUPS=1
RANGE=(0,0.1)
ROT_PNT=(1.51,0.241,-2.558)
ROT_AXIS=(0,1,0)
Angle=90
PARENT=0
[ANIM_COMP_2]
SEQ=0
GROUPS=2
RANGE=(0.3,1)
ROT_PNT=(1.564,0.526,-1.034)
ROT_AXIS=(0,0,1)
Angle=90
PARENT=1
[ANIM_COMP_3]
SEQ=0
GROUPS=3
RANGE=(0.3,1)
ROT_PNT=(1.567,0.00,-2.336)
ROT_AXIS=(-0.00204611,0.309557,0.950879)
Angle=-180
PARENT=2
[ANIM_COMP_4]
SEQ=0
GROUPS=4
RANGE=(0.3,1)
ROT_PNT=(1.564,0.526,-1.034)
ROT_AXIS=(0,0,1)
Angle=180
PARENT=3
[ANIM_COMP_5]
SEQ=0
GROUPS=5
RANGE=(0.3,1)
ROT_PNT=(1.567,0.00,-2.336)
ROT_AXIS=(-0.00204611,0.309557,0.950879)
Angle=-180
PARENT=4
[ANIM_COMP_6]
SEQ=0
GROUPS=6
RANGE=(0.3,1)
ROT_PNT=(1.564,0.526,-1.034)
ROT_AXIS=(0,0,1)
Angle=180
PARENT=5
[ANIM_COMP_7]
SEQ=0
GROUPS=7
RANGE=(0.3,1)
ROT_PNT=(1.567,0.00,-2.336)
ROT_AXIS=(-0.00204611,0.309557,0.950879)
Angle=-180
PARENT=6
[ANIM_COMP_8]
SEQ=0
GROUPS=8
RANGE=(0.3,1)
ROT_PNT=(1.564,0.526,-1.034)
ROT_AXIS=(0,0,1)
Angle=180
PARENT=7
[ANIM_COMP_9]
SEQ=0
GROUPS=9
RANGE=(0.3,1)
ROT_PNT=(1.567,0.00,-2.336)
ROT_AXIS=(-0.00204611,0.309557,0.950879)
Angle=-180
PARENT=8
[ANIM_COMP_10]
SEQ=0
GROUPS=10
RANGE=(0.3,1)
ROT_PNT=(1.564,0.526,-1.034)
ROT_AXIS=(0,0,1)
Angle=180
PARENT=9
[ANIM_COMP_11]
SEQ=0
GROUPS=11
RANGE=(0.3,1)
ROT_PNT=(1.567,0.00,-2.336)
ROT_AXIS=(-0.00204611,0.309557,0.950879)
Angle=-180
PARENT=10
[ANIM_COMP_12]
SEQ=0
GROUPS=12
RANGE=(0.3,1)
ROT_PNT=(1.564,0.526,-1.034)
ROT_AXIS=(0,0,1)
Angle=180
PARENT=11
[ANIM_COMP_13]
SEQ=0
GROUPS=13
RANGE=(0.3,1)
ROT_PNT=(1.564,0.491,-1.655)
ROT_AXIS=(0,0,1)
Angle=-180
PARENT=12
[ANIM_COMP_14]
SEQ=0
GROUPS=14
RANGE=(0.3,1)
ROT_PNT=(1.564,0.526,-1.034)
ROT_AXIS=(0,0,1)
Angle=180
PARENT=13
[ANIM_COMP_15]
SEQ=0
GROUPS=15
RANGE=(0.3,1)
ROT_PNT=(1.567,0.00,-2.336)
ROT_AXIS=(-0.00204611,0.309557,0.950879)
Angle=-180
PARENT=14
[ANIM_COMP_16]
SEQ=0
GROUPS=16
RANGE=(0.3,1)
ROT_PNT=(1.564,0.526,-1.034)
ROT_AXIS=(0,0,1)
Angle=180
PARENT=15
[ANIM_COMP_17]
SEQ=0
GROUPS=17
RANGE=(0.3,1)
ROT_PNT=(1.567,0.00,-2.336)
ROT_AXIS=(-0.00204611,0.309557,0.950879)
Angle=-180
PARENT=16
[ANIM_COMP_18]
SEQ=0
GROUPS=18
RANGE=(0.3,1)
ROT_PNT=(1.564,0.526,-1.034)
ROT_AXIS=(0,0,1)
Angle=180
PARENT=17
[ANIM_COMP_19]
SEQ=0
GROUPS=19
RANGE=(0.3,1)
ROT_PNT=(1.567,0.00,-2.336)
ROT_AXIS=(-0.00204611,0.309557,0.950879)
Angle=-180
PARENT=18
[ANIM_COMP_20]
SEQ=0
GROUPS=20
RANGE=(0.3,1)
ROT_PNT=(1.564,0.526,-1.034)
ROT_AXIS=(0,0,1)
Angle=180
PARENT=19
[ANIM_COMP_21]
SEQ=0
GROUPS=21
RANGE=(0.3,1)
ROT_PNT=(1.567,0.00,-2.336)
ROT_AXIS=(-0.00204611,0.309557,0.950879)
Angle=-180
PARENT=20
[ANIM_COMP_22]
SEQ=0
GROUPS=22
RANGE=(0.3,1)
ROT_PNT=(1.564,0.526,-1.034)
ROT_AXIS=(0,0,1)
Angle=180
PARENT=21
[ANIM_COMP_23]
SEQ=0
GROUPS=23
RANGE=(0.3,1)
ROT_PNT=(1.567,0.00,-2.336)
ROT_AXIS=(-0.00204611,0.309557,0.950879)
Angle=-180
PARENT=22
[ANIM_COMP_24]
SEQ=0
GROUPS=24
RANGE=(0.3,1)
ROT_PNT=(1.564,0.526,-1.034)
ROT_AXIS=(0,0,1)
Angle=90
PARENT=23
; PORT ARRAY
[ANIM_COMP_25]
SEQ=1
GROUPS=25
RANGE=(0.0,1)
ROT_PNT=(-1.43,-0.098,-2.476)
ROT_AXIS=(1,0,0)
Angle=90
[ANIM_COMP_26]
SEQ=0
GROUPS=26
RANGE=(0,0.1)
ROT_PNT=(-1.51,-0.048,-2.558)
ROT_AXIS=(0,1,0)
Angle=-90
PARENT=25
[ANIM_COMP_27]
SEQ=0
GROUPS=27
RANGE=(0.3,1)
ROT_PNT=(-1.564,-0.435,-0.839)
ROT_AXIS=(0,0,1)
Angle=90
PARENT=26
[ANIM_COMP_28]
SEQ=0
GROUPS=28
RANGE=(0.3,1)
ROT_PNT=(-1.567,0.09,-2.336)
ROT_AXIS=(-0.00204611,0.309557,-0.950879)
Angle=180
PARENT=27
[ANIM_COMP_29]
SEQ=0
GROUPS=29
RANGE=(0.3,1)
ROT_PNT=(-1.564,-0.435,-0.839)
ROT_AXIS=(0,0,1)
Angle=180
PARENT=28
[ANIM_COMP_30]
SEQ=0
GROUPS=30
RANGE=(0.3,1)
ROT_PNT=(-1.567,0.09,-2.336)
ROT_AXIS=(-0.00204611,0.309557,-0.950879)
Angle=180
PARENT=29
[ANIM_COMP_31]
SEQ=0
GROUPS=31
RANGE=(0.3,1)
ROT_PNT=(-1.564,-0.435,-0.839)
ROT_AXIS=(0,0,1)
Angle=180
PARENT=30
[ANIM_COMP_32]
SEQ=0
GROUPS=32
RANGE=(0.3,1)
ROT_PNT=(-1.567,0.09,-2.336)
ROT_AXIS=(-0.00204611,0.309557,-0.950879)
Angle=180
PARENT=31
[ANIM_COMP_33]
SEQ=0
GROUPS=33
RANGE=(0.3,1)
ROT_PNT=(-1.564,-0.435,-0.839)
ROT_AXIS=(0,0,1)
Angle=180
PARENT=32
[ANIM_COMP_34]
SEQ=0
GROUPS=34
RANGE=(0.3,1)
ROT_PNT=(-1.567,0.09,-2.336)
ROT_AXIS=(-0.00204611,0.309557,-0.950879)
Angle=180
PARENT=33
[ANIM_COMP_35]
SEQ=0
GROUPS=35
RANGE=(0.3,1)
ROT_PNT=(-1.564,-0.435,-0.839)
ROT_AXIS=(0,0,1)
Angle=180
PARENT=34
[ANIM_COMP_36]
SEQ=0
GROUPS=36
RANGE=(0.3,1)
ROT_PNT=(-1.567,0.09,-2.336)
ROT_AXIS=(-0.00204611,0.309557,-0.950879)
Angle=180
PARENT=35
[ANIM_COMP_37]
SEQ=0
GROUPS=37
RANGE=(0.3,1)
ROT_PNT=(-1.564,-0.435,-0.839)
ROT_AXIS=(0,0,1)
Angle=180
PARENT=36
[ANIM_COMP_38]
SEQ=0
GROUPS=38
RANGE=(0.3,1)
ROT_PNT=(-1.564,-0.401,-1.663)
ROT_AXIS=(0,0,1)
Angle=-180
PARENT=37
[ANIM_COMP_39]
SEQ=0
GROUPS=39
RANGE=(0.3,1)
ROT_PNT=(-1.564,-0.435,-0.839)
ROT_AXIS=(0,0,1)
Angle=180
PARENT=38
[ANIM_COMP_40]
SEQ=0
GROUPS=40
RANGE=(0.3,1)
ROT_PNT=(-1.567,0.09,-2.336)
ROT_AXIS=(-0.00204611,0.309557,-0.950879)
Angle=180
PARENT=39
[ANIM_COMP_41]
SEQ=0
GROUPS=41
RANGE=(0.3,1)
ROT_PNT=(-1.564,-0.435,-0.839)
ROT_AXIS=(0,0,1)
Angle=180
PARENT=40
[ANIM_COMP_42]
SEQ=0
GROUPS=42
RANGE=(0.3,1)
ROT_PNT=(-1.567,0.09,-2.336)
ROT_AXIS=(-0.00204611,0.309557,-0.950879)
Angle=180
PARENT=41
[ANIM_COMP_43]
SEQ=0
GROUPS=43
RANGE=(0.3,1)
ROT_PNT=(-1.564,-0.435,-0.839)
ROT_AXIS=(0,0,1)
Angle=180
PARENT=42
[ANIM_COMP_44]
SEQ=0
GROUPS=44
RANGE=(0.3,1)
ROT_PNT=(-1.567,0.09,-2.336)
ROT_AXIS=(-0.00204611,0.309557,-0.950879)
Angle=180
PARENT=43
[ANIM_COMP_45]
SEQ=0
GROUPS=45
RANGE=(0.3,1)
ROT_PNT=(-1.564,-0.435,-0.839)
ROT_AXIS=(0,0,1)
Angle=180
PARENT=44
[ANIM_COMP_46]
SEQ=0
GROUPS=46
RANGE=(0.3,1)
ROT_PNT=(-1.567,0.09,-2.336)
ROT_AXIS=(-0.00204611,0.309557,-0.950879)
Angle=180
PARENT=45
[ANIM_COMP_47]
SEQ=0
GROUPS=47
RANGE=(0.3,1)
ROT_PNT=(-1.564,-0.435,-0.839)
ROT_AXIS=(0,0,1)
Angle=180
PARENT=46
[ANIM_COMP_48]
SEQ=0
GROUPS=48
RANGE=(0.3,1)
ROT_PNT=(-1.567,0.09,-2.336)
ROT_AXIS=(-0.00204611,0.309557,-0.950879)
Angle=180
PARENT=47
[ANIM_COMP_49]
SEQ=0
GROUPS=49
RANGE=(0.3,1)
ROT_PNT=(-1.564,-0.435,-0.839)
ROT_AXIS=(0,0,1)
Angle=90
PARENT=48
; Array offset
[ANIM_COMP_50]
SEQ=0
GROUPS=24
RANGE=(0.3,1)
ROT_PNT=(1.578,0.526,-0.722)
ROT_AXIS=(0,1,0)
Angle=2
[ANIM_COMP_51] ;hide cover
SEQ=0
GROUPS=24
RANGE=(0.0,2.0)
TYPE=TRANSLATE
SHIFT=(0.15,0.0,0.15)
[ANIM_COMP_52]
SEQ=0
GROUPS=49
RANGE=(0.3,1)
ROT_PNT=(-1.578,-0.388,-0.722)
ROT_AXIS=(0,1,0)
Angle=-2
[ANIM_COMP_53] ;hide cover
SEQ=0
GROUPS=49
RANGE=(0.0,2.0)
TYPE=TRANSLATE
SHIFT=(0.15,0.0,0.15)
; Hatch animation
[ANIM_COMP_54]
;cover
SEQ=2
GROUPS=52
RANGE=(0.0,0.1)
TYPE=SCALE
SCALE=(-0,001,-0.001,1)
REF=(-0.004,0.040,3.766)
[ANIM_COMP_55]
SEQ=2
GROUPS=50,51
RANGE=(0.3,1)
ROT_PNT=(0,0.05,2.563)
ROT_AXIS=(1,0,0)
Angle=-45For the PMI, I assumed a perfect cylinder with Cygnus's overall dimensions and maximum mass.
I have a launch scenario as well using the Multistage2015 AtlasV that I have been working on, if one is not already in the works.
boogabooga
Bug Crusher
- Joined
- Apr 16, 2011
- Messages
- 3,010
- Reaction score
- 16
- Points
- 63
I am working on the launch scenario for this.
No pressure, but are there plans for a dll module version as for the previous Cygnus?
No pressure, but are there plans for a dll module version as for the previous Cygnus?
boogabooga
Bug Crusher
- Joined
- Apr 16, 2011
- Messages
- 3,010
- Reaction score
- 16
- Points
- 63
The one that went with Antares.
boogabooga
Bug Crusher
- Joined
- Apr 16, 2011
- Messages
- 3,010
- Reaction score
- 16
- Points
- 63
For the launch scenario, it seems that the ini file needs to be in the spacecraft folder.
I'm going to put the ini file that I posted above in that folder, if that is okay.
I'm going to put the ini file that I posted above in that folder, if that is okay.
boogabooga
Bug Crusher
- Joined
- Apr 16, 2011
- Messages
- 3,010
- Reaction score
- 16
- Points
- 63
No.This is for a new launch scenario. I'm using Multistage2015 and need to spawn Cygnus Enhanced.
It isn't finding the ini in the subfolder that you have it in when it spawns. AFAIK, it will only spawn properly if one has the ini file in the spacecraft folder. So I am asking, if it is okay to include your ini file that I modified for this, and if I place it in the necessary folder.
It isn't finding the ini in the subfolder that you have it in when it spawns. AFAIK, it will only spawn properly if one has the ini file in the spacecraft folder. So I am asking, if it is okay to include your ini file that I modified for this, and if I place it in the necessary folder.
boogabooga
Bug Crusher
- Joined
- Apr 16, 2011
- Messages
- 3,010
- Reaction score
- 16
- Points
- 63
Thank you
---------- Post added Dec 18th, 2015 at 10:58 PM ---------- Previous post was Dec 17th, 2015 at 11:29 PM ----------
Still working on the launch scenario.
Due to the very high payload mass, the launch is a bit extreme in that it lasts nearly 20 minutes to LEO. Unfortunately, the PEG autopilot in Multistage2015 is not able to put the payload into the proper orbit on its own. I know how to fix it, but I have to customize the guidance routine.
24 more hours at least.
---------- Post added Dec 18th, 2015 at 10:58 PM ---------- Previous post was Dec 17th, 2015 at 11:29 PM ----------
Still working on the launch scenario.
Due to the very high payload mass, the launch is a bit extreme in that it lasts nearly 20 minutes to LEO. Unfortunately, the PEG autopilot in Multistage2015 is not able to put the payload into the proper orbit on its own. I know how to fix it, but I have to customize the guidance routine.
24 more hours at least.
