OHM US ISS A to Z v.3

Gargantua2024 said:
Hello, how do you attach Bartolomeo on a Dragon spacecraft? Thanks
Click to expand...

Quick and dirty:

As we don't have the correct attachment points in the Cargo Dragon trunk, I used Brianjs CRS-15 as CRS-20 and played with the attachment settings in the Bartolomeo.ini. It's not perfect but close to the real storage. But I didn't try to grabble Bartolomeo with the Canadarm2 yet. I don't know if that works. Maybe Donamy has a proper solution.

[CHILD_ATTACH_3] ;to Dragon
NAME="stow"
POS=(0.0,0.3,-0.6)
DIR=(-1,0,0)
ROT=(0,0,1)
LOOSE=0
ID="GS"

For a scenario docked with ISS you can use:

CRS20:dragon1\crs15\dragon1_capsule_CRS15
STATUS Orbiting Earth
RPOS -2815764.188 5816103.079 -2065411.054
RVEL 6873.6393 3388.9891 174.5711
AROT 109.550 24.520 99.753
VROT 0.0645 0.0000 -0.0001
AFCMODE 7
PRPLEVEL 0:1.000000
DOCKINFO 0:2,Harmony
NAVFREQ 94 481
SOLP 0 0.0000 1 0.3001
HTCH 2 1.0000 2 1.0000 0 0.0000
PARA 2 1.0000 0.5000 0.0000 0.0000 3 1.0000 0.0000
TRGT NULL 0 0 0 0 0 0
PYLD 1 0 1 0 0 0.0010 0 1712.0 0.0000 0.0000
END
Rack:dragon1\crs15\pld_rack
STATUS Orbiting Earth
RPOS -2555852.433 5937797.555 -2057024.208
RVEL 7002.1008 3107.8961 273.1586
AROT 109.108 22.138 99.574
VROT 0.0645 -0.0000 -0.0001
ATTACHED 0:2,CRS20
AFCMODE 7
END
Bartolomeo:spacecraft\spacecraft3
STATUS Orbiting Earth
RPOS -2555852.462 5937797.499 -2057024.170
RVEL 7002.1008 3107.8961 273.1586
AROT 110.231 -67.856 -1.040
VROT 0.0001 -0.0635 -0.0112
ATTACHED 3:1,CRS20
AFCMODE 7
NAVFREQ 0 0
RCS 1
CTRL_SURFACE 1
CONFIGURATION 1
CURRENT_PAYLOAD 0
SEQ 0 -2 0.000000
SEQ 1 -2 0.000000
SEQ 2 -2 0.000000
END
Bart_wires:spacecraft\spacecraft3
STATUS Orbiting Earth
RPOS -2555852.462 5937797.499 -2057024.170
RVEL 7002.1008 3107.8961 273.1586
AROT 110.231 -67.856 -1.040
VROT 0.0001 -0.0635 -0.0112
ATTACHED 0:0,Bartolomeo
AFCMODE 7
NAVFREQ 0 0
RCS 1
CTRL_SURFACE 1
CONFIGURATION 1
CURRENT_PAYLOAD 0
END
 

Attachments

  • CRS-20_QuickandDirty.jpg
    CRS-20_QuickandDirty.jpg
    250.8 KB · Views: 37
The Dextre extracted the Bartolomeo.
 
With CRS-21 (still in December?) the next small module "Bishop Airlock" will be delivered and docked to Tranquility. It's a commercial airlock and will be used for launching cubesats and other small satellites. There are a good animation, good reference drawings and pictures on the website. https://nanoracks.com/bishop-airlock/
 
Last edited:
That looks cool. Thanks !!
 
[QUOTE = "OrbitHangar, publicación: 378717, miembro: 477"]

Autor: donamy

Se agregaron archivos y texturas faltantes, a la versión 2 le faltaba la carpeta de texturas. Lo siento !!!

Módulos de estación de EE. UU. Y el Razvet.

Spotlight.dll y evatether.dll incluidos con permiso de BrianJ.

CMG2.dll incluido con permiso de Poscik.
también nuevos .dlls y módulos de capacidad de seguimiento solar. Y gracias a Fizyk por ayudar con las matemáticas para seguir el sol.

Se requiere ISS v3.2 de Thorton para la sección rusa. RTFM !!!!

También se requiere el complemento Spacecraft3 de Vinka.
(Un conocimiento práctico de este complemento es imprescindible)

Todas las animaciones y archivos adjuntos se pueden encontrar en Spacecraft.ini's

No se garantiza que nada funcione.
Descarga bajo tu propio riesgo.

Buena suerte !!!


DESCARGAR
[/ CITAR]
En esta versión me gustaría que agregaras una cabina virtual a todos los módulos de la ISS, pero para abrir y cerrar las escotillas de los módulos como el Proyecto Apollo y también una lista de verificación para saber qué hacer antes de la EVA y antes de ingresar a la ISS. y también antes de atracar y antes de desacoplar como si fuera una realidad
 
ThBaron said:
With CRS-21 (still in December?) the next small module "Bishop Airlock" will be delivered and docked to Tranquility. It's a commercial airlock and will be used for launching cubesats and other small satellites. There are a good animation, good reference drawings and pictures on the website. https://nanoracks.com/bishop-airlock/
Click to expand...
This mission will need the new Cargo dragon 2.
 
Last edited:
Hey yo Guys, are you using ISS AtoZ in Orbiter 2016?
Or does it just work in 2010?
 
Anyone have any info on the robotics ?
The animations that I've seen, has the Airlock being removed from the old Cargo Dragon, with the SSRMS attached to the Destiny module. I believe the Cargo Dragon2 will be docked to the IDA3 on PMA3. So the SSRMS will be attached to the MBS (I think).
Any thoughts ??
 
Thanks, but that shows the Airlock in the old Cargo Dragon.
They used to release detailed robotics before flights.
Does anyone no where to find them ?

A couple shots:
BA Extraction.jpgBA Attach.jpg
 
Good to know. Should be an easy change.
 
You must log in or register to reply here.

Similar threads

CurlSnout
Problem UNABLE to get off the pad using Orbiter 2024 - ???
2 3 4
Replies
67
Views
22K
GLS
GLS
polaris149Tiberius
Tutorial Tutorial Development On Orbiter 2016 Stock Space Shuttle ISS to KSC Ballistic Re-entry Case Study Project -v1.0
Replies
0
Views
5K
polaris149Tiberius
polaris149Tiberius
Matias Saibene
Discussion Preparing CMake to compile Orbiter add-ons (my experience)
Replies
7
Views
4K
Matias Saibene
Matias Saibene
DecoFox
Discussion A Record of My Own Noob Questions, for Reference to Other Noobs
Replies
2
Views
4K
Thunder Chicken
Thunder Chicken
Max-Q
OHM Better ISS
16 17 18
Replies
345
Views
124K
blanik_glider
B
Back
Top