OHM US ISS A to Z v.3

Donamy

Addon Developer
Addon Developer
Donator
Beta Tester
Joined
Oct 16, 2007
Messages
6,904
Reaction score
196
Points
138
Location
Cape
Sure !!

MBS:

Code:
[CONFIG]
MESHNAME="MBS"
SIZE=1
EMPTY_MASS=20



[PARENT_ATTACH_0]	;Grapple 1
NAME="Grapple1"
POS=(1.481,-0.951,0.254)
DIR=(0.5164,-0.338224,0.786725)
ROT=(-0.496465,0.628832,0.598409)
LOOSE =0
ID = "GS"
RANGE =5



[PARENT_ATTACH_1]	;Grapple 2
NAME="Grapple2"
POS=(1.404,0.958,0.325)
DIR=(0.562864,0.320092,0.762053)
ROT=(0.519245,0.582075,-0.625759)
LOOSE =0
ID = "GS"
RANGE =5

[PARENT_ATTACH_2]	;Grapple 3
NAME="Grapple3"
POS=(-1.247,0.868,0.371)
DIR=(-0.206644,0.0529348,0.976983)
ROT=(0,0.99863,-0.0523199)
LOOSE =0
ID = "GS"
RANGE =5 

[PARENT_ATTACH_3]	;Grapple 4
NAME="Grapple4"
POS=(-1.231,-0.93,0.235)
DIR=(0.271638,-0.64808,0.711481)
ROT=(0.699484,-0.376401,-0.60749)
LOOSE =0
ID = "GS"
RANGE=5



[PARENT_ATTACH_4]	;LEE
NAME="LEE"
POS=(-2.83,0.01,0.72)
DIR=(-0.982661653748471,0,0.185407859197825)
ROT=(0,1,0)
LOOSE = 0
RANGE =5

[PARENT_ATTACH_5]	;ESP
NAME="ESP"
POS=(0.03,1.68,0.75)
DIR=(0,0.442888,0.896577)
ROT=(-0.0017866,0.914269,-0.405104)
LOOSE = 0
RANGE =5  

[PARENT_ATTACH_6]	;Ceta STBD
NAME="CETA"
POS=(2.183,-0.08,-1.467)
DIR=(-1,0,0)
ROT=(0,0,1)
LOOSE = 0
RANGE =5 

[PARENT_ATTACH_7]	;Ceta PORT
NAME="CETA"
POS=(-2.141,-0.081,-1.467)
DIR=(1,0,0)
ROT=(0,0,1)
LOOSE = 0
RANGE =5  

[PARENT_ATTACH_8]	;Mast camera
NAME="cam"
POS=(-0.106,-0.021,1.664)
DIR=(0,1,0)
ROT=(0,0,1)
LOOSE = 0
RANGE =5  

[PARENT_ATTACH_9]	;MTRA
NAME="MTRA"
POS=(0.047,2.519,-0.068)
DIR=(0,-1,0)
ROT=(0,0,1)
LOOSE = 0
RANGE =5      

[CHILD_ATTACH_0]	; attachment to MTS
NAME="Attach_MTS"
POS=(-0.0,0.0,0.1)
DIR=(0,0,-1)
ROT=(0,-1,0)
LOOSE = 0
ID="GS"


[ROBOTIC_ARM]
JOINT_0_NAME="PAN"
JOINT_0_SEQ=0
JOINT_0_RANGE=(-180,180)
JOINT_1_NAME="Tilt"
JOINT_1_SEQ=1
JOINT_1_RANGE=(-90,90)
JOINT_2_SEQ=2
GRAP_SEQ=1
GRAP_ATTACH=8

[ANIM_SEQ_0]	;TV PAN
INIT_POS=0.0
DURATION=20

[ANIM_SEQ_1]	;TV tilt
INIT_POS=0.0
DURATION=20


[ANIM_COMP_0] 	;PAN 
SEQ=0
GROUPS=0
RANGE(0,1)
TYPE=ROTATE
ROT_PNT=(0.000,-0.003,1.339)
ROT_AXIS=(0,0,1)
ANGLE=360


[ANIM_COMP_1] 	 ;pitch up
SEQ=1
GROUPS=1
RANGE(0,1)
TYPE=ROTATE
ROT_PNT=(-0.004,-0.003,1.374)
ROT_AXIS=(1,0,0)
ANGLE=180
PARENT=0

[ANIM_COMP_2]	; tip
SEQ=1
TIP_1=(-0.106,-0.021,1.264)
TIP_2=(-0.106,-0.021,2.264)
TIP_3=(-0.106,1.021,1.264)
PARENT=1

S0_truss:

Code:
[CONFIG]
MESHNAME="S0_truss" 
EMPTY_MASS=1814  
SIZE=5

[DOCK_0]           ;to Destiny
POS=(-2.072,-0.673,0.00)
DIR=(1,0,0)
ROT=(0,0,1)

[DOCK_1]           ;to S1
POS=(0.00,0.0,-6.58)
DIR=(0,0,1)
ROT=(0,1,0)

[DOCK_2]           ;to P1
POS=(0.00,0.0,6.58)
DIR=(0,0,-1)
ROT=(0,1,0)

[PARENT_ATTACH_0]	;to node1 wire tray 
NAME="wire_tray"
POS=(-2.05,-0.29,0)
DIR=(0,1,0)
ROT=(0,0,1)
LOOSE=0
ID="XS"

[PARENT_ATTACH_1]	;to MTS
NAME="MTS"
POS=(0,-1.644,-0.027)
DIR=(0,-1,0)
ROT=(1,0,0)
LOOSE=0
ID="XS"

[PARENT_ATTACH_2]	;to CPDS
NAME="CPDS"
POS=(1.93,0.266,-4.525)
DIR=(-1,0,0)
ROT=(0,0,-1)
LOOSE=0
ID="XS"

[PARENT_ATTACH_3]	;to MBSU1
NAME="MBSU1"
POS=(1.219,-1.325,-1.176)
DIR=(0.749072,-0.662489,0)
ROT=(-0.666441,-0.745558,0)
LOOSE=0
ID="XS"

[PARENT_ATTACH_4]	;to MBSU2
NAME="MBSU2"
POS=(1.219,-1.325,1.175)
DIR=(0.749072,-0.662489,0)
ROT=(-0.666441,-0.745558,0)
LOOSE=0
ID="XS"

[PARENT_ATTACH_5]	;to MBSU3
NAME="MBSU3"
POS=(-1.296,-1.273,1.966)
DIR=(-0.752334,-0.658782,0)
ROT=(0.662751,-0.74884,0)
LOOSE=0
ID="XS"

[PARENT_ATTACH_6]	;to MBSU4
NAME="MBSU4"
POS=(-1.296,-1.273,-1.962)
DIR=(-0.752334,-0.658782,0)
ROT=(0.662751,-0.74884,0)
LOOSE=0
ID="XS"

[PARENT_ATTACH_7]	;to dextreORU
NAME="dextreORU"
POS=(1.866,0.636,0.25)
DIR=(0.817206,0.576346,0)
ROT=(0,0,1)
LOOSE=0
ID="XS"

[PARENT_ATTACH_8]	; WIF 33
NAME="WIF33"
POS=(-1.011,1.574,1.954)
DIR=(0.865926,-0.499908,-0.0162443)
ROT=(0,0,1)
LOOSE=0
ID="XS"

[PARENT_ATTACH_9]	; WIF 22
NAME="WIF22"
POS=(1.194,-1.216,0.608)
DIR=(0.773582,-0.633696,0)
ROT=(0,0,1)
LOOSE=0
ID="XS"

[PARENT_ATTACH_10]	; WIF 18
NAME="WIF18"
POS=(1.194,-1.216,-0.622)
DIR=(0.773582,-0.633696,0)
ROT=(0,0,1)
LOOSE=0
ID="XS"


[CHILD_ATTACH_0]	;to Destiny 
NAME="Destiny"
POS=(0,0,0)
DIR=(0,1,0)
ROT=(0,0,1)
LOOSE=0
ID="XS"

[CHILD_ATTACH_1]	;Grapple
NAME="grapple"
POS=(-1.1,1.4,3.88)
DIR=(-0.81686,0.576498,0.0197596)
ROT=(-0.600845,-0.799213,0.0156026)
LOOSE=0
ID="GS"

[CHILD_ATTACH_2]	;to bay
NAME="PLBY"
POS=(0,-3.0,-1.0)
DIR=(0,-1,0)
ROT=(0,0,-1)
LOOSE=0
ID="XS"

;-----------------------------------
;       animation sequences


[ANIM_SEQ_0]  
;strut attach
KEY=1
DURATION=8

;-------------------------------------
;         animations
;
;        strut attach

[ANIM_COMP_0]  ;Port forward struts
SEQ=0
GROUPS=0,1
RANGE=(0.,1.)
ROT_PNT=(-1.083,-1.411,0.891)
ROT_AXIS=(0.0486822,-0.0509376,-0.997515)
ANGLE=-50.

[ANIM_COMP_1]  ;Stbd forward struts
SEQ=0
GROUPS=2,3
RANGE=(0.,1.)
ROT_PNT=(-1.083,-1.411,-0.927)
ROT_AXIS=(-0.0486822,0.0509376,-0.997515)
ANGLE=-50.

[ANIM_COMP_2]  ;Z1 tray
SEQ=0
GROUPS=24
RANGE=(0.,1.)
ROT_PNT=(-1.75,0.37,0.04)
ROT_AXIS=(0,0,1)
ANGLE=40.

[ANIM_COMP_3]  ;Port aft strut
SEQ=0
GROUPS=5,6
RANGE=(0.,1.)
ROT_PNT=(-1.57,0.85,1.72)
ROT_AXIS=(0.636021,0.771672,0.000229885)
ANGLE=-80.

[ANIM_COMP_4]  ;Port aft strut
SEQ=0
GROUPS=4
RANGE=(0.,1.)
ROT_PNT=(-1.99,0.49,3.45)
ROT_AXIS=(0.633403,0.773529,0.0212909)
ANGLE=115.
PARENT=3

[ANIM_COMP_5]  ;Port aft strut
SEQ=0
GROUPS=7,8
RANGE=(0.,1.)
ROT_PNT=(-1.57,0.85,-1.72)
ROT_AXIS=(0.636021,0.771672,-0.000229885)
ANGLE=80.

[ANIM_COMP_6]  ;Port aft strut
SEQ=0
GROUPS=9
RANGE=(0.,1.)
ROT_PNT=(-1.99,0.49,-3.45)
ROT_AXIS=(-0.633403,-0.773528,0.021336)
ANGLE=115.
PARENT=5

;

[ANIM_SEQ_1]  
;keel stow
KEY=2
DURATION=8

[ANIM_COMP_7]  ;front keel translate
SEQ=1
GROUPS=16,17,18,19,20
RANGE=(0.,0.05)
TYPE=TRANSLATE
SHIFT=(0,0.0,-8.2365)

[ANIM_COMP_8]  ;front keel rotate
SEQ=1
GROUPS=16,17,18,19,20
RANGE=(0.05,0.1)
ROT_PNT=(0.0,-2.65,-4.09)
ROT_AXIS=(0,0,1)
ANGLE=90.

[ANIM_COMP_9]  ;aft keel rotate
SEQ=1
GROUPS=10,11,12,13,15
RANGE=(0.15,0.2)
ROT_PNT=(0.0,-2.65,-4.09)
ROT_AXIS=(0,0,1)
ANGLE=-90.

[ANIM_COMP_10]  ;2 keel translate
SEQ=1
GROUPS=10,11,12,13,15,16,17,18,19,20
RANGE=(0.25,0.3)
TYPE=TRANSLATE
SHIFT=(0,0.0,-0.81)

[ANIM_COMP_11]  ;2 keel translate up
SEQ=1
GROUPS=10,11,12,13,15,16,17,18,19,20
RANGE=(0.35,0.4)
TYPE=TRANSLATE
SHIFT=(0,3.198,0.0)

[ANIM_COMP_12]  ;front keel 2nd rotate
SEQ=1
GROUPS=10,11,12,13,15,16,17,18,19,20
RANGE=(0.45,0.5)
ROT_PNT=(0.0,1.24,-4.82)
ROT_AXIS=(-0.999559,-0.00447614, 0.0293614)
ANGLE=-58.5

[ANIM_COMP_13]  ;Aft keel 3rd rotate
SEQ=1
GROUPS=10,11,12,13,15
RANGE=(0.55,0.6)
ROT_PNT=(1.0,1.29,-4.86)
ROT_AXIS=(-0.0148948,-0.830602, 0.556667)
ANGLE=20.

[ANIM_COMP_14]  ;front keel 3rd rotate
SEQ=1
GROUPS=16,17,18,19,20
RANGE=(0.55,0.6)
ROT_PNT=(-1.0,1.29,-4.86)
ROT_AXIS=(0.0148948,-0.830602, 0.556667)
ANGLE=-20.

[ANIM_COMP_15]  ;Aft keel support rotate
SEQ=1
GROUPS=14
RANGE=(0.0,1.0)
ROT_PNT=(0.57,-1.67,-1.77)
ROT_AXIS=(-0.954298,0.00899054,0.298722)
ANGLE=-110.

[ANIM_COMP_16]  ;front keel support rotate
SEQ=1
GROUPS=21
RANGE=(0.0,1.0)
ROT_PNT=(0.57,-1.67,6.48)
ROT_AXIS=(0.954298,-0.00899054, -0.298722)
ANGLE=88.

;-----------------------------------
;      airlock spur animation 

[ANIM_SEQ_2]  
;airlock spur deploy
KEY=3
DURATION=8

[ANIM_COMP_17]  ;airlock spur deploy
SEQ=2
GROUPS=22,23
RANGE=(0.0,0.5)
ROT_PNT=(-2.19,0.04,-6.63)
ROT_AXIS=(0,0,1)
ANGLE=116.

[ANIM_COMP_18]  ;airlock spur deploy
SEQ=2
GROUPS=22,23
RANGE=(0.55,1)
ROT_PNT=(-2.13,0.02,-6.63)
ROT_AXIS=(1,0,0)
ANGLE=40.
 

Donamy

Addon Developer
Addon Developer
Donator
Beta Tester
Joined
Oct 16, 2007
Messages
6,904
Reaction score
196
Points
138
Location
Cape
I was a genericvessel version, that Face made, that allowed multiple robotic arms to be used for SC3 vessels. Work stopped on it when Vinka came back, and released SC4. IIRC SC5 was supposed to be released, that would allow for the multiple robotics arms. But nothing so far.
 

Zandy12

Add-on Developer
Donator
Joined
Nov 19, 2017
Messages
170
Reaction score
2
Points
18
Location
Ames
Sure !!

MBS:

Code:
[CONFIG]
MESHNAME="MBS"
SIZE=1
EMPTY_MASS=20



[PARENT_ATTACH_0]	;Grapple 1
NAME="Grapple1"
POS=(1.481,-0.951,0.254)
DIR=(0.5164,-0.338224,0.786725)
ROT=(-0.496465,0.628832,0.598409)
LOOSE =0
ID = "GS"
RANGE =5



[PARENT_ATTACH_1]	;Grapple 2
NAME="Grapple2"
POS=(1.404,0.958,0.325)
DIR=(0.562864,0.320092,0.762053)
ROT=(0.519245,0.582075,-0.625759)
LOOSE =0
ID = "GS"
RANGE =5

[PARENT_ATTACH_2]	;Grapple 3
NAME="Grapple3"
POS=(-1.247,0.868,0.371)
DIR=(-0.206644,0.0529348,0.976983)
ROT=(0,0.99863,-0.0523199)
LOOSE =0
ID = "GS"
RANGE =5 

[PARENT_ATTACH_3]	;Grapple 4
NAME="Grapple4"
POS=(-1.231,-0.93,0.235)
DIR=(0.271638,-0.64808,0.711481)
ROT=(0.699484,-0.376401,-0.60749)
LOOSE =0
ID = "GS"
RANGE=5



[PARENT_ATTACH_4]	;LEE
NAME="LEE"
POS=(-2.83,0.01,0.72)
DIR=(-0.982661653748471,0,0.185407859197825)
ROT=(0,1,0)
LOOSE = 0
RANGE =5

[PARENT_ATTACH_5]	;ESP
NAME="ESP"
POS=(0.03,1.68,0.75)
DIR=(0,0.442888,0.896577)
ROT=(-0.0017866,0.914269,-0.405104)
LOOSE = 0
RANGE =5  

[PARENT_ATTACH_6]	;Ceta STBD
NAME="CETA"
POS=(2.183,-0.08,-1.467)
DIR=(-1,0,0)
ROT=(0,0,1)
LOOSE = 0
RANGE =5 

[PARENT_ATTACH_7]	;Ceta PORT
NAME="CETA"
POS=(-2.141,-0.081,-1.467)
DIR=(1,0,0)
ROT=(0,0,1)
LOOSE = 0
RANGE =5  

[PARENT_ATTACH_8]	;Mast camera
NAME="cam"
POS=(-0.106,-0.021,1.664)
DIR=(0,1,0)
ROT=(0,0,1)
LOOSE = 0
RANGE =5  

[PARENT_ATTACH_9]	;MTRA
NAME="MTRA"
POS=(0.047,2.519,-0.068)
DIR=(0,-1,0)
ROT=(0,0,1)
LOOSE = 0
RANGE =5      

[CHILD_ATTACH_0]	; attachment to MTS
NAME="Attach_MTS"
POS=(-0.0,0.0,0.1)
DIR=(0,0,-1)
ROT=(0,-1,0)
LOOSE = 0
ID="GS"


[ROBOTIC_ARM]
JOINT_0_NAME="PAN"
JOINT_0_SEQ=0
JOINT_0_RANGE=(-180,180)
JOINT_1_NAME="Tilt"
JOINT_1_SEQ=1
JOINT_1_RANGE=(-90,90)
JOINT_2_SEQ=2
GRAP_SEQ=1
GRAP_ATTACH=8

[ANIM_SEQ_0]	;TV PAN
INIT_POS=0.0
DURATION=20

[ANIM_SEQ_1]	;TV tilt
INIT_POS=0.0
DURATION=20


[ANIM_COMP_0] 	;PAN 
SEQ=0
GROUPS=0
RANGE(0,1)
TYPE=ROTATE
ROT_PNT=(0.000,-0.003,1.339)
ROT_AXIS=(0,0,1)
ANGLE=360


[ANIM_COMP_1] 	 ;pitch up
SEQ=1
GROUPS=1
RANGE(0,1)
TYPE=ROTATE
ROT_PNT=(-0.004,-0.003,1.374)
ROT_AXIS=(1,0,0)
ANGLE=180
PARENT=0

[ANIM_COMP_2]	; tip
SEQ=1
TIP_1=(-0.106,-0.021,1.264)
TIP_2=(-0.106,-0.021,2.264)
TIP_3=(-0.106,1.021,1.264)
PARENT=1

S0_truss:

Code:
[CONFIG]
MESHNAME="S0_truss" 
EMPTY_MASS=1814  
SIZE=5

[DOCK_0]           ;to Destiny
POS=(-2.072,-0.673,0.00)
DIR=(1,0,0)
ROT=(0,0,1)

[DOCK_1]           ;to S1
POS=(0.00,0.0,-6.58)
DIR=(0,0,1)
ROT=(0,1,0)

[DOCK_2]           ;to P1
POS=(0.00,0.0,6.58)
DIR=(0,0,-1)
ROT=(0,1,0)

[PARENT_ATTACH_0]	;to node1 wire tray 
NAME="wire_tray"
POS=(-2.05,-0.29,0)
DIR=(0,1,0)
ROT=(0,0,1)
LOOSE=0
ID="XS"

[PARENT_ATTACH_1]	;to MTS
NAME="MTS"
POS=(0,-1.644,-0.027)
DIR=(0,-1,0)
ROT=(1,0,0)
LOOSE=0
ID="XS"

[PARENT_ATTACH_2]	;to CPDS
NAME="CPDS"
POS=(1.93,0.266,-4.525)
DIR=(-1,0,0)
ROT=(0,0,-1)
LOOSE=0
ID="XS"

[PARENT_ATTACH_3]	;to MBSU1
NAME="MBSU1"
POS=(1.219,-1.325,-1.176)
DIR=(0.749072,-0.662489,0)
ROT=(-0.666441,-0.745558,0)
LOOSE=0
ID="XS"

[PARENT_ATTACH_4]	;to MBSU2
NAME="MBSU2"
POS=(1.219,-1.325,1.175)
DIR=(0.749072,-0.662489,0)
ROT=(-0.666441,-0.745558,0)
LOOSE=0
ID="XS"

[PARENT_ATTACH_5]	;to MBSU3
NAME="MBSU3"
POS=(-1.296,-1.273,1.966)
DIR=(-0.752334,-0.658782,0)
ROT=(0.662751,-0.74884,0)
LOOSE=0
ID="XS"

[PARENT_ATTACH_6]	;to MBSU4
NAME="MBSU4"
POS=(-1.296,-1.273,-1.962)
DIR=(-0.752334,-0.658782,0)
ROT=(0.662751,-0.74884,0)
LOOSE=0
ID="XS"

[PARENT_ATTACH_7]	;to dextreORU
NAME="dextreORU"
POS=(1.866,0.636,0.25)
DIR=(0.817206,0.576346,0)
ROT=(0,0,1)
LOOSE=0
ID="XS"

[PARENT_ATTACH_8]	; WIF 33
NAME="WIF33"
POS=(-1.011,1.574,1.954)
DIR=(0.865926,-0.499908,-0.0162443)
ROT=(0,0,1)
LOOSE=0
ID="XS"

[PARENT_ATTACH_9]	; WIF 22
NAME="WIF22"
POS=(1.194,-1.216,0.608)
DIR=(0.773582,-0.633696,0)
ROT=(0,0,1)
LOOSE=0
ID="XS"

[PARENT_ATTACH_10]	; WIF 18
NAME="WIF18"
POS=(1.194,-1.216,-0.622)
DIR=(0.773582,-0.633696,0)
ROT=(0,0,1)
LOOSE=0
ID="XS"


[CHILD_ATTACH_0]	;to Destiny 
NAME="Destiny"
POS=(0,0,0)
DIR=(0,1,0)
ROT=(0,0,1)
LOOSE=0
ID="XS"

[CHILD_ATTACH_1]	;Grapple
NAME="grapple"
POS=(-1.1,1.4,3.88)
DIR=(-0.81686,0.576498,0.0197596)
ROT=(-0.600845,-0.799213,0.0156026)
LOOSE=0
ID="GS"

[CHILD_ATTACH_2]	;to bay
NAME="PLBY"
POS=(0,-3.0,-1.0)
DIR=(0,-1,0)
ROT=(0,0,-1)
LOOSE=0
ID="XS"

;-----------------------------------
;       animation sequences


[ANIM_SEQ_0]  
;strut attach
KEY=1
DURATION=8

;-------------------------------------
;         animations
;
;        strut attach

[ANIM_COMP_0]  ;Port forward struts
SEQ=0
GROUPS=0,1
RANGE=(0.,1.)
ROT_PNT=(-1.083,-1.411,0.891)
ROT_AXIS=(0.0486822,-0.0509376,-0.997515)
ANGLE=-50.

[ANIM_COMP_1]  ;Stbd forward struts
SEQ=0
GROUPS=2,3
RANGE=(0.,1.)
ROT_PNT=(-1.083,-1.411,-0.927)
ROT_AXIS=(-0.0486822,0.0509376,-0.997515)
ANGLE=-50.

[ANIM_COMP_2]  ;Z1 tray
SEQ=0
GROUPS=24
RANGE=(0.,1.)
ROT_PNT=(-1.75,0.37,0.04)
ROT_AXIS=(0,0,1)
ANGLE=40.

[ANIM_COMP_3]  ;Port aft strut
SEQ=0
GROUPS=5,6
RANGE=(0.,1.)
ROT_PNT=(-1.57,0.85,1.72)
ROT_AXIS=(0.636021,0.771672,0.000229885)
ANGLE=-80.

[ANIM_COMP_4]  ;Port aft strut
SEQ=0
GROUPS=4
RANGE=(0.,1.)
ROT_PNT=(-1.99,0.49,3.45)
ROT_AXIS=(0.633403,0.773529,0.0212909)
ANGLE=115.
PARENT=3

[ANIM_COMP_5]  ;Port aft strut
SEQ=0
GROUPS=7,8
RANGE=(0.,1.)
ROT_PNT=(-1.57,0.85,-1.72)
ROT_AXIS=(0.636021,0.771672,-0.000229885)
ANGLE=80.

[ANIM_COMP_6]  ;Port aft strut
SEQ=0
GROUPS=9
RANGE=(0.,1.)
ROT_PNT=(-1.99,0.49,-3.45)
ROT_AXIS=(-0.633403,-0.773528,0.021336)
ANGLE=115.
PARENT=5

;

[ANIM_SEQ_1]  
;keel stow
KEY=2
DURATION=8

[ANIM_COMP_7]  ;front keel translate
SEQ=1
GROUPS=16,17,18,19,20
RANGE=(0.,0.05)
TYPE=TRANSLATE
SHIFT=(0,0.0,-8.2365)

[ANIM_COMP_8]  ;front keel rotate
SEQ=1
GROUPS=16,17,18,19,20
RANGE=(0.05,0.1)
ROT_PNT=(0.0,-2.65,-4.09)
ROT_AXIS=(0,0,1)
ANGLE=90.

[ANIM_COMP_9]  ;aft keel rotate
SEQ=1
GROUPS=10,11,12,13,15
RANGE=(0.15,0.2)
ROT_PNT=(0.0,-2.65,-4.09)
ROT_AXIS=(0,0,1)
ANGLE=-90.

[ANIM_COMP_10]  ;2 keel translate
SEQ=1
GROUPS=10,11,12,13,15,16,17,18,19,20
RANGE=(0.25,0.3)
TYPE=TRANSLATE
SHIFT=(0,0.0,-0.81)

[ANIM_COMP_11]  ;2 keel translate up
SEQ=1
GROUPS=10,11,12,13,15,16,17,18,19,20
RANGE=(0.35,0.4)
TYPE=TRANSLATE
SHIFT=(0,3.198,0.0)

[ANIM_COMP_12]  ;front keel 2nd rotate
SEQ=1
GROUPS=10,11,12,13,15,16,17,18,19,20
RANGE=(0.45,0.5)
ROT_PNT=(0.0,1.24,-4.82)
ROT_AXIS=(-0.999559,-0.00447614, 0.0293614)
ANGLE=-58.5

[ANIM_COMP_13]  ;Aft keel 3rd rotate
SEQ=1
GROUPS=10,11,12,13,15
RANGE=(0.55,0.6)
ROT_PNT=(1.0,1.29,-4.86)
ROT_AXIS=(-0.0148948,-0.830602, 0.556667)
ANGLE=20.

[ANIM_COMP_14]  ;front keel 3rd rotate
SEQ=1
GROUPS=16,17,18,19,20
RANGE=(0.55,0.6)
ROT_PNT=(-1.0,1.29,-4.86)
ROT_AXIS=(0.0148948,-0.830602, 0.556667)
ANGLE=-20.

[ANIM_COMP_15]  ;Aft keel support rotate
SEQ=1
GROUPS=14
RANGE=(0.0,1.0)
ROT_PNT=(0.57,-1.67,-1.77)
ROT_AXIS=(-0.954298,0.00899054,0.298722)
ANGLE=-110.

[ANIM_COMP_16]  ;front keel support rotate
SEQ=1
GROUPS=21
RANGE=(0.0,1.0)
ROT_PNT=(0.57,-1.67,6.48)
ROT_AXIS=(0.954298,-0.00899054, -0.298722)
ANGLE=88.

;-----------------------------------
;      airlock spur animation 

[ANIM_SEQ_2]  
;airlock spur deploy
KEY=3
DURATION=8

[ANIM_COMP_17]  ;airlock spur deploy
SEQ=2
GROUPS=22,23
RANGE=(0.0,0.5)
ROT_PNT=(-2.19,0.04,-6.63)
ROT_AXIS=(0,0,1)
ANGLE=116.

[ANIM_COMP_18]  ;airlock spur deploy
SEQ=2
GROUPS=22,23
RANGE=(0.55,1)
ROT_PNT=(-2.13,0.02,-6.63)
ROT_AXIS=(1,0,0)
ANGLE=40.

You are awesome!
 
Last edited:

Donamy

Addon Developer
Addon Developer
Donator
Beta Tester
Joined
Oct 16, 2007
Messages
6,904
Reaction score
196
Points
138
Location
Cape
That was an easy one.
 

gattispilot

Addon Developer
Addon Developer
Joined
Oct 17, 2007
Messages
8,636
Reaction score
2,613
Points
203
Location
Dallas, TX
I was a genericvessel version, that Face made, that allowed multiple robotic arms to be used for SC3 vessels. Work stopped on it when Vinka came back, and released SC4. IIRC SC5 was supposed to be released, that would allow for the multiple robotics arms. But nothing so far.
Thanks. So is this Generic Vessel



https://www.orbiter-forum.com/showthread.php?t=33130



needed for the ISS a to Z addon?
 

Donamy

Addon Developer
Addon Developer
Donator
Beta Tester
Joined
Oct 16, 2007
Messages
6,904
Reaction score
196
Points
138
Location
Cape
Only spacecraft4 should be needed, for the original ISS A2Z Orbiter 2016, but for newer addons , that have more than one movable parent attachmnet point. I'm not sure if that version of genericvessel works.
 

Zandy12

Add-on Developer
Donator
Joined
Nov 19, 2017
Messages
170
Reaction score
2
Points
18
Location
Ames
@gattispilot yeah that version of genericvessel works fine in Orbiter 2016 I use it for the HTV7 extension.
 

Donamy

Addon Developer
Addon Developer
Donator
Beta Tester
Joined
Oct 16, 2007
Messages
6,904
Reaction score
196
Points
138
Location
Cape
:uhh:...er sorry, not really. Been working on DM-1, for the most part. I could say, it was because of the partial government shut-down, but then I would be lying. Do you have the placement info for those payloads ?
 

pappy2

Active member
Joined
May 3, 2012
Messages
398
Reaction score
36
Points
43
:uhh:...er sorry, not really. Been working on DM-1, for the most part. I could say, it was because of the partial government shut-down, but then I would be lying. Do you have the placement info for those payloads ?

Hello "Dan"
I do not need an excuse for late work.
It's just the consequences of a huge success. :tiphat:

Regarding the "GEDI" experience it is now installed on the JEM-EF / 6


https://forum.nasaspaceflight.com/index.php?topic=46944.100

And regarding RRM3 it is installed on ELC-1 / Pallet 3


https://forum.nasaspaceflight.com/index.php?topic=46944.120

thank you in advance
Pappy2

EDIT

DM-1 launch very quickly :thumbup:
 
Last edited:

DaveS

Addon Developer
Addon Developer
Donator
Beta Tester
Joined
Feb 4, 2008
Messages
9,429
Reaction score
680
Points
203
Found a tiny issue with the MPLMs, and that is that two of the interior handrails is poking through the forward end cone. This is quite noticeable when looking at the module during night. As the material used for the interior is set to be emissive, the bright handrail shows up well against the otherwise dark end end cone exterior. I have attached a screenshot that shows this.
 

Attachments

  • MPLM_protruding_handrail.jpg
    MPLM_protruding_handrail.jpg
    63 KB · Views: 34

pappy2

Active member
Joined
May 3, 2012
Messages
398
Reaction score
36
Points
43
Hello "Don"

CRS-17 has delivered new experiences (OCO-3 + STP-H6) for the work of the crew of the station, do you think you have time to make these new charges for updating the ISS ?










Thank you in advance

NOTE:
Have you made progress on the CRS-16 experiments ??
 

Donamy

Addon Developer
Addon Developer
Donator
Beta Tester
Joined
Oct 16, 2007
Messages
6,904
Reaction score
196
Points
138
Location
Cape
Thanks for the info, I'll check them out. As far as the CRS-16, I just use the old RMM.
 

pappy2

Active member
Joined
May 3, 2012
Messages
398
Reaction score
36
Points
43
Thanks for the info, I'll check them out. As far as the CRS-16, I just use the old RMM.

Hello "Don"
CRS-16 experiences in the course of work.
"GEDI" and "RRM-3" soon on the ISS.

thank you in advance
 

ThBaron

Donator
Donator
Joined
May 14, 2018
Messages
77
Reaction score
10
Points
23
Hello Don and Pappy,
I would be very interested to know how you have implemented GEDI + RRM3 from CRS-16 and OCO-3 + STP-H6 from CRS-17 without the corresponding addon updates for a long time.
Could you please be so kind to publish your scenario code for these objects? Thanks in advance!:tiphat:
 

pappy2

Active member
Joined
May 3, 2012
Messages
398
Reaction score
36
Points
43
Hello Don and Pappy,
I would be very interested to know how you have implemented GEDI + RRM3 from CRS-16 and OCO-3 + STP-H6 from CRS-17 without the corresponding addon updates for a long time.
Could you please be so kind to publish your scenario code for these objects? Thanks in advance!:tiphat:

Hello "ThBaron"

Sorry, but the updates for CRS-16, CRS-17, have not been created yet by our friend "Don" who must have a lot of work in progress.
A Tuesday maybe .....

But you can now update the ISS with IDA3 brought by CRS-18.
We talk about it here:
https://www.orbiter-forum.com/showthread.php?t=35320&highlight=International+Docking+Adapter&page=3
 
Last edited:

Donamy

Addon Developer
Addon Developer
Donator
Beta Tester
Joined
Oct 16, 2007
Messages
6,904
Reaction score
196
Points
138
Location
Cape
More batteries going to the ISS soon.
 

ThBaron

Donator
Donator
Joined
May 14, 2018
Messages
77
Reaction score
10
Points
23
Status of the external experiments/modules on Columbus and JEM

Hi ISS enthusiasts,
I would like to give an overview of the status of the external experiments on the Columbus module and JEM's exposed facility, to show which changes to 'ISS A to Z' would be necessary in the interest of creating an up-to-date ISS model.

Removed experiments on Columbus:
- SOLAR was burnt up on 01/31/2020 with Cygnus NG-12 (in Orbiter 'colex1')
- SDS was burnt on 01/31/2020 with Cygnus NG-12
- HDEV was burnt up on 05/07/20 with Cygnus NG-13

Only ASIM is currently still attached

New module at Columbus, no Orbiter module available yet:
- Bartolomeo (new payload hosting platform, provided by Airbus), attached since 04/02/2020 (delivered with Dragon CRS-20)

Removed experiments on JEM EF's:
- CATS was burnt up on 07/04/2019 with Dragon CRS-17 trunk
- SEDA was jettisoned on 12/21/2018
- ICS was jettisoned on 02/21/2020

Currently are still attached MAXI, NREP, CALET, ECOSTRESS and CREAM

New experiments on JEM EF's, no Orbiter modules available yet:
- OCO-3 (delivered with Dragon CRS-17)
- i-SEEP platform with HDTV-EF2 (since 2017), GPSR/Wheel and SOLISS (since 2019)
- GEDI (delivered with Dragon CRS-16)
- HISUI (delivered with Dragon CRS-19)
- ExHAM 1 and 2 (since 2015)

Unfortunately I am not a modeler, otherwise I would like to help creating the new modules. I always start with it, but I haven't gotten very far.
Many greetings, Thomas
 
Last edited:

Donamy

Addon Developer
Addon Developer
Donator
Beta Tester
Joined
Oct 16, 2007
Messages
6,904
Reaction score
196
Points
138
Location
Cape
If you have some detailed drawings a pictures of the modules and where they are at, I could take a look at them.
 
Top