Not sure if this is the right place,
So looking at Shuttle fleet payloads. So the satellites are made from 4 parts.
But then looking at the cfg of each 4 only one shows a mesh the equip which shows the PAM
So we show the PAM mesh but the Satellite is HS-376. It has the module as Spacecraft3. But I can not find a HS-376 ini in spacecraft.
Here is another satellit different name but same class:
This has animation sequences. But what tells to show the satellite mesh?
Seems like it should just be 2 vessels PAM and Satellite
So looking at Shuttle fleet payloads. So the satellites are made from 4 parts.
PAM-1:STS_PAYLOADS\PAM
STATUS Orbiting Earth
ATTACHED 0:0,STS-5
PRPLEVEL 0:1.000
END
STAR-48B1:STS_PAYLOADS\EQUIP
STATUS Orbiting Earth
ATTACHED 0:0,PAM-1
END
STAR-30B1:STS_PAYLOADS\STAR
STATUS Orbiting Earth
ATTACHED 0:0,STAR-48B1
END
SBS-3:STS_PAYLOADS\HS-376
STATUS Orbiting Earth
ATTACHED 0:0,STAR-30B1
PRPLEVEL 0:1.000
CONFIGURATION 1
CURRENT_PAYLOAD 0
END
But then looking at the cfg of each 4 only one shows a mesh the equip which shows the PAM
; === Configuration file for vessel class STS-PAM ===
ClassName = PAM
Mass = 236 ;124KG EMPTY STAR-48B SHORT: MASS 102KG EQUIPMENT MASS
PropellantResource1 = 2000 ;STS LOAD FUEL
Size = 10
MaxAttitudeThrust = 0
ISP = 2802
MaxMainThrust = 67170
TouchdownPoints = 0 -0.882 -2.027 -.882 .882 -2.027 .882 .882 -2.027
CrossSections = 1.77 1.80 1.37
Inertia = 0.22 0.22 0.22
MEngineRef1 = 0 0 -1.5
CameraOffset = 0 1.2 -0.15
; === Attachment specs ===
BEGIN_ATTACHMENT
C 0 0 0 0 0 1 0 1 0 XS ;TO STAR-48B
P 0 0 0 0 0 -1 0 1 0 XS ;TO SPIN TABLE
END_ATTACHMENT
; === Configuration file for vessel class Satellite ===
ClassName = EQUIP
MeshName = sts_payloads\pam-d
Mass = 1124
Size = 10
PropellantResource1 = 10
MaxAttitudeThrust = 1
MaxMainThrust = 1
AttRefZ00 = 0.65 0 -0.2
AttRefZ01 = -0.65 0 -0.2
ISP = 10000
EnableFocus = FALSE
; === Attachment specs ===
BEGIN_ATTACHMENT
P 0 0 0 0 0 -1 0 1 0 XS ; TO PAM-D
C 0 0 0 0 0 1 0 1 0 XS ; TO SATELLITE
END_ATTACHMENT
; === Configuration file for vessel class Satellite ===
ClassName = STAR
Mass = 32
EnableFocus = FALSE
Size = 10
; === Attachment specs ===
BEGIN_ATTACHMENT
P 0 0 0 0 0 -1 0 1 0 XS ; TO PAM-D
C 0 0 0 0 0 1 0 1 0 XS ; TO SATELLITE
END_ATTACHMENT
; === Configuration file for vessel class NASA ASE PAM ===
ClassName = HS-376
Module = Spacecraft3
; === Attachment specs ===
BEGIN_ATTACHMENT
P 0 0 -2.28 0 0 -1 0 1 0 XS ; TO PAM EQUIPMENT
P 0 0 -1.13 0 0 1 0 1 0 XS ; TO STINGER
C 0 0 1.13 0 0 1 0 1 0 XS ; TO A-FRAME
C 0 0.17 -2.95 0 0 1 0 1 0 XS ; TO STINGER
END_ATTACHMENT
So we show the PAM mesh but the Satellite is HS-376. It has the module as Spacecraft3. But I can not find a HS-376 ini in spacecraft.
Here is another satellit different name but same class:
PALAPA-B1:STS_PAYLOADS\HS-376
STATUS Orbiting Earth
RPOS 5864152.29 3044501.76 962955.07
RVEL 480.717 -3162.462 7039.959
AROT 72.82 -61.32 172.08
VROT 0.07 -0.00 -0.00
ATTACHED 0:0,STAR-30B1
AFCMODE 7
PRPLEVEL 0:1.000000
NAVFREQ 0 0
RCS 1
CTRL_SURFACE 1
CONFIGURATION 1
CURRENT_PAYLOAD 0
SEQ 0 -2 0.000000
SEQ 1 -2 0.000000
END
This has animation sequences. But what tells to show the satellite mesh?
Seems like it should just be 2 vessels PAM and Satellite
Last edited: