RSLS Abort

STS · Jan 28, 2016

Hello.

I am running this scenario and the RSLS always triggers an abort. I don´t know why.

Code:

BEGIN_DESC
Orbiter saved state at T = 5189
END_DESC

BEGIN_ENVIRONMENT
  System Sol
  Date MJD 57060.5118850097
END_ENVIRONMENT

BEGIN_FOCUS
  Ship Enterprise
END_FOCUS

BEGIN_CAMERA
  TARGET Enterprise
  MODE Extern
  POS 2.81 -0.29 -104.81
  TRACKMODE TargetRelative
  FOV 50.11
END_CAMERA

BEGIN_MFD Left
  TYPE User
  MODE CRT
  Mode2 2
  Display 3
  MDUID 0
END_MFD

BEGIN_MFD Right
  TYPE User
  MODE CRT
  Mode2 1
  Display 1
  MDUID 1
END_MFD

BEGIN_MFD 3
  TYPE User
  MODE CRT
  Mode2 1
  Display 1
  MDUID 2
END_MFD

BEGIN_MFD 4
  TYPE User
  MODE CRT
  Mode2 2
  Display 4
  MDUID 3
END_MFD

BEGIN_MFD 5
  TYPE User
  MODE CRT
  Mode2 3
  Display 0
  MDUID 4
END_MFD

BEGIN_MFD 6
  TYPE User
  MODE CRT
  Mode2 3
  Display 0
  MDUID 5
END_MFD

BEGIN_MFD 7
  TYPE User
  MODE CRT
  Mode2 3
  Display 0
  MDUID 6
END_MFD

BEGIN_MFD 8
  TYPE User
  MODE CRT
  Mode2 2
  Display 4
  MDUID 8
END_MFD

BEGIN_MFD 9
  TYPE User
  MODE CRT
  Mode2 2
  Display 3
  MDUID 9
END_MFD

BEGIN_VC
END_VC

BEGIN_SHIPS
MLP-2:SSU_MLP
  STATUS Landed Earth
  POS -80.6040620 28.6084030
  HEADING 0.00
  ATTACHED 0:0,LC39A
  AFCMODE 7
  NAVFREQ 0 0
  T0_UMB 0 0.0000
END
LCC:SSU_LCC
  STATUS Landed Earth
  POS -80.6040745 28.6083855
  HEADING 270.00
  AFCMODE 7
  NAVFREQ 0 0
  LAUNCH_MJD 57060.513194
  PAD_NAME LC39A
  SHUTTLE_NAME Enterprise
END
LC39A:SSU_Pad
  STATUS Landed Earth
  POS -80.6040720 28.6083850
  HEADING 270.00
  AFCMODE 7
  PRPLEVEL 0:0.000139 1:1.000000
  THLEVEL 2:1.000000 3:1.000000 4:1.000000 5:1.000000 6:1.000000
  NAVFREQ 0 0
  ACCESS_ARM 0 0.0000
  GVA 2 0.6130
  VENTHOOD 0 0.0000
  FSS_OWP 0 0.0000
  RSS_OWP 0 0.0000
  RSS 1 1.0000
  FSS_GH2 0 0.0000
  FSS_IAA 0 0.0000
  EAST_SRB_SFD 1 1.0000
  WEST_SRB_SFD 1 1.0000
  SHUTTLE Enterprise
END
Enterprise:SpaceShuttleUltra
  STATUS Landed Earth
  POS -80.6232502 28.6197342
  HEADING 0.00
  ATTACHED 0:0,MLP-2
  AFCMODE 7
  PRPLEVEL 0:1.000000 1:1.000000 2:0.765032 3:0.970791 4:0.970914 5:0.971089 6:1.000000 7:1.000000 8:0.999000 11:0.020000
  THLEVEL 3:1.000000 4:1.000000 5:1.000000
  NAVFREQ 0 0
  MISSION ORB-GEN
  CONFIGURATION 0
  VC_POS 0
  GEAR 0 0.0000
  OPS 101
  PLB_CAM 0.0000 -90.0000 -0.0000 90.0000 0.0000 -90.0000 0.0000 90.0000
@SUBSYSTEM HeEng_C
  PRESS 4358.938195
  VALVES 1.000000 1.000000 0.000000 0.000000
@ENDSUBSYSTEM        ;HeEng_C
@SUBSYSTEM HeEng_L
  PRESS 4359.002220
  VALVES 1.000000 1.000000 0.000000 0.000000
@ENDSUBSYSTEM        ;HeEng_L
@SUBSYSTEM HeEng_R
  PRESS 4359.010171
  VALVES 1.000000 1.000000 0.000000 0.000000
@ENDSUBSYSTEM        ;HeEng_R
@SUBSYSTEM HePneu
  PRESS 4360.022668
  VALVES 1.000000 1.000000 0.000000
@ENDSUBSYSTEM        ;HePneu
@SUBSYSTEM MPS
@ENDSUBSYSTEM        ;MPS
@SUBSYSTEM MPS_C
  SSME config 2
  VIE config 1
  DCU_chA config 2
  DCU_chB config 2
  CIE_chA config 1
  CIE_chB config 1
@ENDSUBSYSTEM        ;MPS_C
@SUBSYSTEM MPS_L
  SSME config 2
  VIE config 1
  DCU_chA config 2
  DCU_chB config 2
  CIE_chA config 1
  CIE_chB config 1
@ENDSUBSYSTEM        ;MPS_L
@SUBSYSTEM MPS_R
  SSME config 2
  VIE config 1
  DCU_chA config 2
  DCU_chB config 2
  CIE_chA config 1
  CIE_chB config 1
@ENDSUBSYSTEM        ;MPS_R
@SUBSYSTEM FMC1
@ENDSUBSYSTEM        ;FMC1
@SUBSYSTEM FMC2
@ENDSUBSYSTEM        ;FMC2
@SUBSYSTEM FMC3
@ENDSUBSYSTEM        ;FMC3
@SUBSYSTEM MMC1
@ENDSUBSYSTEM        ;MMC1
@SUBSYSTEM MMC2
@ENDSUBSYSTEM        ;MMC2
@SUBSYSTEM MMC3
@ENDSUBSYSTEM        ;MMC3
@SUBSYSTEM MMC4
@ENDSUBSYSTEM        ;MMC4
@SUBSYSTEM AMC1
@ENDSUBSYSTEM        ;AMC1
@SUBSYSTEM AMC2
@ENDSUBSYSTEM        ;AMC2
@SUBSYSTEM AMC3
@ENDSUBSYSTEM        ;AMC3
@SUBSYSTEM FF1
@ENDSUBSYSTEM        ;FF1
@SUBSYSTEM FF2
@ENDSUBSYSTEM        ;FF2
@SUBSYSTEM FF3
@ENDSUBSYSTEM        ;FF3
@SUBSYSTEM FF4
@ENDSUBSYSTEM        ;FF4
@SUBSYSTEM FA1
@ENDSUBSYSTEM        ;FA1
@SUBSYSTEM FA2
@ENDSUBSYSTEM        ;FA2
@SUBSYSTEM FA3
@ENDSUBSYSTEM        ;FA3
@SUBSYSTEM FA4
@ENDSUBSYSTEM        ;FA4
@SUBSYSTEM PL1
@ENDSUBSYSTEM        ;PL1
@SUBSYSTEM PL2
@ENDSUBSYSTEM        ;PL2
@SUBSYSTEM LF1
@ENDSUBSYSTEM        ;LF1
@SUBSYSTEM LM1
@ENDSUBSYSTEM        ;LM1
@SUBSYSTEM LA1
@ENDSUBSYSTEM        ;LA1
@SUBSYSTEM OF1
@ENDSUBSYSTEM        ;OF1
@SUBSYSTEM OF2
@ENDSUBSYSTEM        ;OF2
@SUBSYSTEM OF3
@ENDSUBSYSTEM        ;OF3
@SUBSYSTEM OF4
@ENDSUBSYSTEM        ;OF4
@SUBSYSTEM OA1
@ENDSUBSYSTEM        ;OA1
@SUBSYSTEM OA2
@ENDSUBSYSTEM        ;OA2
@SUBSYSTEM OA3
@ENDSUBSYSTEM        ;OA3
@SUBSYSTEM LL1
@ENDSUBSYSTEM        ;LL1
@SUBSYSTEM LL2
@ENDSUBSYSTEM        ;LL2
@SUBSYSTEM LR1
@ENDSUBSYSTEM        ;LR1
@SUBSYSTEM LR2
@ENDSUBSYSTEM        ;LR2
@SUBSYSTEM EIU1
@ENDSUBSYSTEM        ;EIU1
@SUBSYSTEM EIU2
@ENDSUBSYSTEM        ;EIU2
@SUBSYSTEM EIU3
@ENDSUBSYSTEM        ;EIU3
@SUBSYSTEM MTU
  MET_RUNNING 0
  MET0 0.000000
  MET1 0.000000
  MET2 0.000000
EVENT_TIMER0 0.000000 DOWN STOPPED
EVENT_TIMER1 0.000000 DOWN STOPPED
@ENDSUBSYSTEM        ;MTU
@SUBSYSTEM IDP1
  IDP1 SPEC 65535
  IDP1 DISP 65535
@ENDSUBSYSTEM        ;IDP1
@SUBSYSTEM IDP2
  IDP2 SPEC 65535
  IDP2 DISP 18
@ENDSUBSYSTEM        ;IDP2
@SUBSYSTEM IDP3
  IDP3 SPEC 65535
  IDP3 DISP 18
@ENDSUBSYSTEM        ;IDP3
@SUBSYSTEM IDP4
  IDP4 SPEC 65535
  IDP4 DISP 65535
@ENDSUBSYSTEM        ;IDP4
@SUBSYSTEM IMU1
@ENDSUBSYSTEM        ;IMU1
@SUBSYSTEM IMU2
@ENDSUBSYSTEM        ;IMU2
@SUBSYSTEM IMU3
@ENDSUBSYSTEM        ;IMU3
@SUBSYSTEM GPC1
@ENDSUBSYSTEM        ;GPC1
@SUBSYSTEM GPC2
@ENDSUBSYSTEM        ;GPC2
@SUBSYSTEM GPC3
@ENDSUBSYSTEM        ;GPC3
@SUBSYSTEM GPC4
@ENDSUBSYSTEM        ;GPC4
@SUBSYSTEM GPC5
@ENDSUBSYSTEM        ;GPC5
@SUBSYSTEM MMU1
@ENDSUBSYSTEM        ;MMU1
@SUBSYSTEM MMU2
@ENDSUBSYSTEM        ;MMU2
@SUBSYSTEM SimpleGPCSystem
  @BEGINSOFTWARE MPS_Dedicated_Display_Driver
  @ENDSOFTWARE 
  @BEGINSOFTWARE SSME_SOP
  ShutdownPhase_1 0
  ShutdownPhase_2 0
  ShutdownPhase_3 0
  PostShutdownPhase_1 0
  PostShutdownPhase_2 0
  PostShutdownPhase_3 0
  @ENDSOFTWARE 
  @BEGINSOFTWARE RSLS_old
  @ENDSOFTWARE 
  @BEGINSOFTWARE IO_Control
  @ENDSOFTWARE 
  @BEGINSOFTWARE ATVC_SOP
  CONFIG 1
  @ENDSOFTWARE 
  @BEGINSOFTWARE GeneralDisplays
  @ENDSOFTWARE 
@ENDSUBSYSTEM        ;SimpleGPCSystem
@SUBSYSTEM ADPS
  LEFT_AIRDATAPROBE 1 3 0.000000
  RIGHT_AIRDATAPROBE 1 3 0.000000
@ENDSUBSYSTEM        ;ADPS
@SUBSYSTEM ETUmbDoors
  ET_DOORS 1.000000 1.000000
  ET_DOOR_LATCHES 0.000000 1.000000 1.000000
@ENDSUBSYSTEM        ;ETUmbDoors
@SUBSYSTEM -YStarTrackerDoorMotor
@ENDSUBSYSTEM        ;-YStarTrackerDoorMotor
@SUBSYSTEM -ZStarTrackerDoorMotor
@ENDSUBSYSTEM        ;-ZStarTrackerDoorMotor
@SUBSYSTEM ACBusSystem
@ENDSUBSYSTEM        ;ACBusSystem
@SUBSYSTEM INVERTER1
@ENDSUBSYSTEM        ;INVERTER1
@SUBSYSTEM INVERTER2
@ENDSUBSYSTEM        ;INVERTER2
@SUBSYSTEM INVERTER3
@ENDSUBSYSTEM        ;INVERTER3
@SUBSYSTEM ATVC
@ENDSUBSYSTEM        ;ATVC
@SUBSYSTEM PayloadBay
  CARGODOOR 0 0.0000
  RADIATOR 0 0.0000
  RADLATCH 0 0.0000
  KUBAND 0 0.0000
  BAYDOORLATCH0 0 0.0000
  BAYDOORLATCH1 0 0.0000
  BAYDOORLATCH2 0 0.0000
  BAYDOORLATCH3 0 0.0000
@ENDSUBSYSTEM        ;PayloadBay
@SUBSYSTEM APU1
  APU1_State 2
  APU1_FuelPress 1427.552019
  APU1_HydPress 2999.187994
  APU1_Speed 122.732730
@ENDSUBSYSTEM        ;APU1
@SUBSYSTEM APU2
  APU2_State 2
  APU2_FuelPress 1453.819514
  APU2_HydPress 2967.887448
  APU2_Speed 105.103832
@ENDSUBSYSTEM        ;APU2
@SUBSYSTEM APU3
  APU3_State 2
  APU3_FuelPress 1473.432661
  APU3_HydPress 3022.670958
  APU3_Speed 135.538541
@ENDSUBSYSTEM        ;APU3
@SUBSYSTEM WSB1
@ENDSUBSYSTEM        ;WSB1
@SUBSYSTEM WSB2
@ENDSUBSYSTEM        ;WSB2
@SUBSYSTEM WSB3
@ENDSUBSYSTEM        ;WSB3
@SUBSYSTEM LATCH0
  LATCH_STATE1 1 1.0000
  LATCH_STATE2 1 1.0000
  LATCH_STATE3 1 1.0000
  LATCH_STATE4 1 1.0000
  LATCH_STATE5 1 1.0000
@ENDSUBSYSTEM        ;LATCH0
@SUBSYSTEM LATCH1
  LATCH_STATE1 1 1.0000
  LATCH_STATE2 1 1.0000
  LATCH_STATE3 1 1.0000
  LATCH_STATE4 1 1.0000
  LATCH_STATE5 1 1.0000
@ENDSUBSYSTEM        ;LATCH1
@SUBSYSTEM LATCH2
  LATCH_STATE1 1 1.0000
  LATCH_STATE2 1 1.0000
  LATCH_STATE3 1 1.0000
  LATCH_STATE4 1 1.0000
  LATCH_STATE5 1 1.0000
@ENDSUBSYSTEM        ;LATCH2
@SUBSYSTEM RMS
  ARM_STATUS 0.500000 0.013605 0.014688 0.500000 0.500000 0.500000
  SHOULDER_BRACE 1.000000
  GRAPPLE 1 1.0000
  RIGIDIZE 1 1.0000
  EXTEND 1 1.0000
  RMS_ELBOW_CAM 0.0000 0.0000
  RMS_ROLLOUT 0 0.0000
  RMS_LATCHES 0 0.0000
@ENDSUBSYSTEM        ;RMS
@SUBSYSTEM STBD_MPM
  STBD_MPM_ROLLOUT 0 0.0000
  STBD_MPM_LATCHES 0 0.0000
@ENDSUBSYSTEM        ;STBD_MPM
@SUBSYSTEM ODS
  RING_STATE -1 0.0000
@ENDSUBSYSTEM        ;ODS
  @PANEL F2
  "F2_SPDBKTHROT_AUTO" 1
  "F2_BODYFLAP_AUTO" 1
  "F2_PITCH_AUTO" 1
  "F2_PITCH_CSS" 0
  "F2_RY_AUTO" 1
  "F2_RY_CSS" 0
  "Drag Chute ARM Cover" [0]
  "Drag Chute DPY Cover" [0]
  "Drag Chute ARM" 0
  "Drag Chute DPY" 0
  @ENDPANEL 
  @PANEL F3
  "Drag Chute ARM Cover" [0]
  "Drag Chute DPY Cover" [0]
  "Drag Chute JETT Cover" [0]
  "Drag Chute ARM" 0
  "Drag Chute DPY" 0
  "Drag Chute JETT" 0
  @ENDPANEL 
  @PANEL F4
  "F4_SPDBKTHROT_AUTO" 1
  "F4_BODYFLAP_AUTO" 1
  "F4_PITCH_AUTO" 1
  "F4_PITCH_CSS" 0
  "F4_RY_AUTO" 1
  "F4_RY_CSS" 0
  "Drag Chute JETT Cover" [0]
  "Drag Chute JETT" 0
  @ENDPANEL 
  @PANEL F6
  "Cdr Flt Cntlr Pwr" ON
  "ADI Attitude" LVLH
  "ADI Error" MED
  "ADI Rate" MED
  "Landing Gear ARM Cover" [0]
  "Landing Gear DN Cover" [0]
  "Landing Gear ARM" 0
  "Landing Gear DN" 0
  @ENDPANEL 
  @PANEL F7
  @ENDPANEL 
  @PANEL F8
  "Plt Flt Cntlr Pwr" ON
  "ADI Attitude" LVLH
  "ADI Error" MED
  "ADI Rate" MED
  "Landing Gear ARM Cover" [0]
  "Landing Gear DN Cover" [0]
  "Landing Gear ARM" 0
  "Landing Gear DN" 0
  @ENDPANEL 
  @PANEL R2
  "Boiler1 N2 Supply" ON
  "Boiler2 N2 Supply" ON
  "Boiler3 N2 Supply" ON
  "Boiler1 Cntlr" ON
  "Boiler2 Cntlr" ON
  "Boiler3 Cntlr" ON
  "Boiler1 Cntlr Pwr/Htr" A
  "Boiler2 Cntlr Pwr/Htr" A
  "Boiler3 Cntlr Pwr/Htr" A
  "APU1 Run" START/RUN
  "APU2 Run" START/RUN
  "APU3 Run" START/RUN
  "Hyd Main Pump Press 1" NORM
  "Hyd Main Pump Press 2" NORM
  "Hyd Main Pump Press 3" NORM
  "APU1 Cntlr Pwr " ON
  "APU2 Cntlr Pwr " ON
  "APU3 Cntlr Pwr " ON
  "APU1 Fuel Tank Valve" OPEN
  "APU2 Fuel Tank Valve" OPEN
  "APU3 Fuel Tank Valve" OPEN
  "ET Umb Centerline Latch" GND
  "ET Umb Left Door" OFF
  "ET Umb Left Door Latch" OFF
  "ET Umb Right Door" OFF
  "ET Umb Right Door Latch" OFF
  "MPS Pwr Left AC2" [1]
  "MPS Pwr Ctr AC1" [1]
  "MPS Pwr Right AC3" [1]
  "MPS Pwr Left AC3" [1]
  "MPS Pwr Ctr AC2" [1]
  "MPS Pwr Right AC1" [1]
  "MPS He Isol A Left" OPEN
  "MPS He Isol A Ctr" OPEN
  "MPS He Isol A Right" OPEN
  "MPS He Isol B Left" OPEN
  "MPS He Isol B Ctr" OPEN
  "MPS He Isol B Right" OPEN
  "MPS PRPLT Dump Sequence" GPC
  "MPS PRPLT Backup LH2 vlv" GPC
  "Pneu L Eng He XOVR" GPC
  "Pneu He Isol" OPEN
  "He Interconnect Left" GPC
  "He Interconnect Ctr" GPC
  "He Interconnect Right" GPC
  "LH2 Ullage Press" AUTO
  @ENDPANEL 
  @PANEL C2
  "IDP/CRT 1 Power" ON
  "IDP/CRT 2 Power" ON
  "IDP/CRT 3 Power" ON
  "IDP/CRT 1 Maj Func" GNC
  "IDP/CRT 2 Maj Func" GNC
  "IDP/CRT 3 Maj Func" GNC
  "Left CRT Sel" 1
  "Right CRT Sel" 2
  @ENDPANEL 
  @PANEL C3
  "LOMS Arm" ARM/PRESS
  "ROMS Arm" ARM/PRESS
  "BFC CRT Display" ON
  "BFC CRT Select" 2+3
  "LADP Stow Enable" INHIBIT
  "RADP Stow Enable" INHIBIT
  "LADP Deploy" STOW
  "RADP Deploy" STOW
  "MAIN ENGINE LIMIT SHUT DN" AUTO
  "SSME Left S/D PB Cover" [0]
  "SSME Ctr S/D PB Cover" [0]
  "SSME Right S/D PB Cover" [0]
  "SRB Separation" AUTO
  "SRB Separation PB Cover" [0]
  "ET Separation" AUTO
  "ET Separation PB Cover" [0]
  @ENDPANEL 
  @PANEL O3
  "RCS/OMS/PRESS" OMS PRPLT
  "RCS/OMS PRPLT QTY" OMS FUEL
  @ENDPANEL 
  @PANEL O6
  "L GLRSHLD FLOOD" VAR
  "S TRK DR CNTL SYS1 Cover" [0]
  "S TRK DR CNTL SYS2 Cover" [0]
  "S TRK DR CNTL SYS1" OFF
  "S TRK DR CNTL SYS2" OFF
  "GPC_POWER_1_COVER" [0]
  "GPC_POWER_2_COVER" [0]
  "GPC_POWER_3_COVER" [0]
  "GPC_POWER_4_COVER" [0]
  "GPC_POWER_5_COVER" [0]
  "GPC POWER 1" ON
  "GPC POWER 2" ON
  "GPC POWER 3" ON
  "GPC POWER 4" ON
  "GPC POWER 5" ON
  "GPC_OUTPUT_1_COVER" [0]
  "GPC_OUTPUT_2_COVER" [0]
  "GPC_OUTPUT_3_COVER" [0]
  "GPC_OUTPUT_4_COVER" [0]
  "GPC_OUTPUT_5_COVER" [0]
  "GPC OUTPUT 1" NORMAL
  "GPC OUTPUT 2" NORMAL
  "GPC OUTPUT 3" NORMAL
  "GPC OUTPUT 4" NORMAL
  "GPC OUTPUT 5" BACKUP
  "IPL SOURCE" OFF
  "GPC MODE 1" RUN
  "GPC MODE 2" RUN
  "GPC MODE 3" RUN
  "GPC MODE 4" RUN
  "GPC MODE 5" RUN
  @ENDPANEL 
  @PANEL O17
  "EIU L-C" ON
  "EIU C-R" ON
  "EIU R-L" ON
  @ENDPANEL 
  @PANEL R11
  "IDP/CRT 4 Power" ON
  "IDP/CRT 4 Maj Func" GNC
  @ENDPANEL 
  @PANEL R13L
  "PL Bay Door SYS 1" DISABLE
  "PL Bay Door SYS 2" DISABLE
  "PL Bay Mech PWR SYS 1" OFF
  "PL Bay Mech PWR SYS 2" OFF
  "PL Bay Door" STOP
  "Latch Control SYS A" OFF
  "Latch Control SYS B" OFF
  "Radiator Control SYS A" OFF
  "Radiator Control SYS B" OFF
  "KU Antenna Direct Stow" OFF
  "KU Antenna" GND
  @ENDPANEL 
  @PANEL A6
  "SENSE" -X
  "Aft Flt Cntlr Pwr" OFF
  "Payload Ret Latch 1" OFF
  "Payload Ret Latch 2" OFF
  "Payload Ret Latch 3" OFF
  "Payload Ret Latch 4" OFF
  "Payload Ret Latch 5" OFF
  "Payload Select" 1
  "ADI Attitude" LVLH
  "ADI Error" MED
  "ADI Rate" MED
  @ENDPANEL 
  @PANEL AftMDU
  @ENDPANEL 
  @PANEL A7U
  "PLBD FLOOD FWD STBD" OFF
  "PLBD FLOOD FWD PORT" OFF
  "PLBD FLOOD MID STBD" OFF
  "PLBD FLOOD MID PORT" OFF
  "PLBD FLOOD AFT STBD" OFF
  "PLBD FLOOD AFT PORT" OFF
  "PLBD FWD BHD" OFF
  "PLBD DOCKING" OFF
  "RMS SPOTLIGHT PORT" OFF
  @ENDPANEL 
  @PANEL A4
  "Mission Timer" MET
  @ENDPANEL 
  @PANEL A8
  "Port MPM Deploy Cover" [0]
  "Stbd MPM Deploy Cover" [0]
  "Port RMS Latches" OFF
  "Stbd MPM Latches" OFF
  "Port MPM Deploy" OFF
  "Stbd MPM Deploy" OFF
  "EE Mode" OFF
  "RMS SELECT" OFF
  "Parameter" POSITION
  "Joint" SHOULDER_YAW
  "RMS Mode" OPR_CMD
  @ENDPANEL 
  @PANEL A7A3/A8A3
  "SYSTEM POWER MNA" [1]
  "SYSTEM POWER MNB" [1]
  "PYRO POWER MNA" [0]
  "PYRO POWER MNC" [0]
  "SYS1 VENT ISOL" [1]
  "SYS1 VENT" [1]
  "SYS2 VENT ISOL" [1]
  "SYS2 VENT" [1]
  "PSU POWER MNA" [0]
  "PSU POWER MNB" [0]
  "LIGHTS AIRLOCK 1-4" [0]
  "LIGHTS AIRLOCK 2-3" [0]
  "LIGHTS DOCKING TRUSS FWD" [0]
  "LIGHTS DOCKING TRUSS AFT" [0]
  "ARLK/TNL FAN A" [0]
  "ARLK/TNL FAN B" [0]
  "LIGHTS C/L VESTIBULE PORT" [0]
  "LIGHTS C/L VESTIBULE STBD" [0]
  "CNTL PNL PWR A" OFF
  "CNTL PNL PWR B" OFF
  "CNTL PNL PWR C" OFF
  "HTRS/DCU PWR H1" OFF
  "HTRS/DCU PWR H2/DCU" OFF
  "HTRS/DCU PWR H3/DCU" OFF
  "APDS PWR A" OFF
  "APDS PWR B" OFF
  "APDS PWR C" OFF
  "PYROS Ap" [0]
  "PYROS Bp" [0]
  "PYROS Cp" [0]
  @ENDPANEL 
END
ET:SSU_SLWT
  STATUS Landed Earth
  POS 0.0000000 0.0000000
  HEADING 0.00
  ATTACHED 0:20,Enterprise
  AFCMODE 7
END
LSRB:SSU_LSRB
  STATUS Landed Earth
  POS 0.0000000 -1.0000000
  HEADING 0.00
  ATTACHED 0:21,Enterprise
  AFCMODE 7
  PRPLEVEL 1:1.000000
  SECTION_COUNT 5
END
RSRB:SSU_RSRB
  STATUS Landed Earth
  POS 0.0000000 0.0000000
  HEADING 0.00
  ATTACHED 0:22,Enterprise
  AFCMODE 7
  PRPLEVEL 1:1.000000
  SECTION_COUNT 5
END
END_SHIPS

BEGIN_DX9ExtMFD
END

Code:

Name=ORB-GEN
EnableWingPainting=TRUE
Orbiter=Discovery
UseRMS=true
UseSTBDMPM=true
UseODS=true
ODSZPos=10.6
TargetInc=28.400000
TargetLAN=0.000000
MECOAlt=105000.000000
MECOVel=7918.543974
MECOFPA=1.053688
UseOMS=true
OMSAssistStart=133.000000
OMSAssistEnd=298.000000
PerformRollToHeadsUp=true

Code:

LCC: T-31
LCC: MPS He Supply terminated
RSLS: Open LOX POGO Recirculation Valves
RSLS: Initialize MEs throttle to 100%
RSLS: ME Start Enable Command
RSLS: Open LH2 Prevalves
RSLS: Close LO2 Overboard Bleed Valve
RSLS: ME-3 Ignition Command
RSLS: ME-2 Ignition Command
RSLS: ME-1 Ignition Command
RSLS: SSME gimbal to Launch Configuration Command
RSLS Abort
T-1.614183 - MPS E-2 in Shutdown Phase
RSLS: LV10 open command
T-1.614183 - RSLS Abort SSME 3 already in controller initiated shutdown
T-1.614183 - RSLS Abort SSME 2 already in controller initiated shutdown
T+0.802437 - RSLS Abort SSME 1 shutdown
T+2.902398 - RSLS Abort SSME 2 LOX PV close command
T+2.902398 - RSLS Abort SSME 3 LOX PV close command
T+3.302397 - RSLS Abort SSME 2 LH2 PV close command
T+3.302397 - RSLS Abort SSME 3 LH2 PV close command
T+5.302393 - RSLS Abort SSME 1 LOX PV close command
T+5.702271 - RSLS Abort SSME 1 LH2 PV close command
LCC: OAA extend

Urwumpe · Jan 29, 2016

Looks like the SSME controller on MPS E-2 decided to switch into shutdown phase for a reason...

Why can't we download the engine data from the tape recorder?

h:

Well, I would say GLS is the best person to ask for verifying the scenario configuration, I would need to read a while about the work he did with the SSME simulation, it is really complex. :hailprobe:

I can only do some general analysis there on missing variable initializations right now.

For the future, it might be a good reason to have the Orbiter Instrumentation available for getting all this data recorded.

---------- Post added at 01:49 PM ---------- Previous post was at 12:01 AM ----------

I just noticed, your scenario is incomplete, the propellant resources #9 and #10 are missing in the SpaceShuttleUltra vessel block.

Better turn this:

Code:

PRPLEVEL 0:1.000000 1:1.000000 2:0.765032 3:0.970791 4:0.970914 5:0.971089 6:1.000000 7:1.000000 8:0.999000 11:0.020000

into this

Code:

PRPLEVEL 0:1.000000 1:1.000000 2:0.765032 3:0.970791 4:0.970914 5:0.971089 6:1.000000 7:1.000000 8:0.999000 9:1.000000 10:1.000000 11:0.020000

Otherwise the propellant resources are created empty by Orbiter.

I can't tell now what propellant resources #9 and #10 are (I could look into the sources via SVN, if you can wait a few hours for the next break at my work), but I remembered that such a bug caused RSLS aborts in my scenarios once as well.

EDIT: #9 and #10 are the aft RCS propellant tanks. Not related to the SSME controller.

STS · Jan 29, 2016

This scenario was based on STS-114 launch, if I remember correctly.

I can wait, NP.

GLS · Jan 29, 2016

A very quick look at the scenario and the log output, makes me think the problem is here:

Code:

ET:SSU_SLWT
  STATUS Landed Earth
  POS 0.0000000 0.0000000
  HEADING 0.00
  ATTACHED 0:20,Enterprise
  AFCMODE 7
END

There's no propellant in the ET.... the engines start with the MPS manifold prop in the aft compartment. When that ends they shutdown (yes, I know they shouldn't even start but there are still many redline checks missing :S).
The ET propellant is declared in the ET vessel, so the PRPLEVEL line is needed there. If that doesn't fix it, please complain and I'll run the scenario and do a proper debugging.
I know it might be a PITA to read, but the manual has a list of parameters for each vessel (except for the orbiter itself which scared me with all its subsystems) for use in the scenario files.

Urwumpe · Jan 29, 2016

@GLS: Should we ever get to a finalized scenario file format, we could at least run a verifier on it. Sadly we change too much in the next future.

What Do you think, could we maybe include some basic LCC/MCC simulation soon to have an scenario file independent check of vital parameters during simulation?

EDIT: And if I could give you a PCMMU and a tape recorder, could you then let it record the engine controller tlm at least on a binary tape file?

(For clarification: I already have a tape drive implementation for the MMU, that uses memory mapped IO for quickly working with large binary data. It would be no problem to take the solution and adapt it.)

STS · Jan 29, 2016

GLS said:
A very quick look at the scenario and the log output, makes me think the problem is here:

Code:

ET:SSU_SLWT STATUS Landed Earth POS 0.0000000 0.0000000 HEADING 0.00 ATTACHED 0:20,Enterprise AFCMODE 7 END

There's no propellant in the ET.... the engines start with the MPS manifold prop in the aft compartment. When that ends they shutdown (yes, I know they shouldn't even start but there are still many redline checks missing :S).
The ET propellant is declared in the ET vessel, so the PRPLEVEL line is needed there. If that doesn't fix it, please complain and I'll run the scenario and do a proper debugging.
I know it might be a PITA to read, but the manual has a list of parameters for each vessel (except for the orbiter itself which scared me with all its subsystems) for use in the scenario files.

No fuel... :lol:

Will test the solution.

---------- Post added at 04:47 PM ---------- Previous post was at 04:28 PM ----------

Code:

ET:SSU_SLWT
  STATUS Orbiting Earth
  PRPLEVEL 0:0.996000
  ATTACHED 0:20,Enterprise
END

Liftoff!

GLS · Jan 29, 2016

Urwumpe said:
@GLS: Should we ever get to a finalized scenario file format, we could at least run a verifier on it. Sadly we change too much in the next future.

What Do you think, could we maybe include some basic LCC/MCC simulation soon to have an scenario file independent check of vital parameters during simulation?

EDIT: And if I could give you a PCMMU and a tape recorder, could you then let it record the engine controller tlm at least on a binary tape file?

(For clarification: I already have a tape drive implementation for the MMU, that uses memory mapped IO for quickly working with large binary data. It would be no problem to take the solution and adapt it.)

Problems like this happen due to human error, and I'm not blaming the human here. It's just that there are so many systems and parameters and configurations, that it is humanly impossible to know it all. That's why I'd like to have a system that can create/edit scenarios (and if the stars align could also upgrade them when it's needed).

About the SSME telemetry, AFAIK it was recorded as it came out of the EIU and (maybe) a subset in the GPCs.
There's an option in the mission files enable the EIU recording, the format could be more compact, but I chose a csv-like system to then create charts easily in excel.... anyway, I then created a VB6 program to interpret the data, it isn't anything special but it shows the data converted to "usable" info for debugging. I can make that available if it's needed, but maybe creating an upgraded version as part of the "SSU<insert name of external SSU program to do things>" is a better idea.
Although I see a very big need for a LCC and MCC, I think there're more pressing matters on the table (DPS, OMS/RCS, upper stages, vc panels and controls update...).
Anyway, I currently don't have enough time for SSU

, maybe in April/May I can get back "full time" to finally finish the KU antenna and the radar.

---------- Post added at 03:55 PM ---------- Previous post was at 03:52 PM ----------

STS said:
No fuel... :lol:

... and oxidizer.

Urwumpe · Jan 29, 2016

GLS said:
Anyway, I currently don't have enough time for SSU , maybe in April/May I can get back "full time" to finally finish the KU antenna and the radar.

Don't worry there. I also currently mostly plan my work there and research technical data... I have some exams next week and will then take a day or two for making a quick invisible New Shepard module for testing before returning to SSU.

Last action I had there was a way to translate COMPOOL structures from HAL/S into C++ and listings with GPC memory symbols that can be used for making display formats.

Also I need to do some Lua script to extract the northern Atlantic coast line from Orbiters map display vector data and get it into the IDP for rendering.

Maybe I will hack some early LCC into SSU along the way for just easing the pain there.

STS · Jan 29, 2016

And Strange thing on OMS-2.

With a DVx of 296.26 fps to circularise the orbit, I have a burn solution of only 26 seconds, and efectively the burn is too short.

I think the DV is calculated properly because the GPC predicts a good target orbit.

Code:

BEGIN_DESC
Orbiter saved state at T = 1544
END_DESC

BEGIN_ENVIRONMENT
  System Sol
  Date MJD 57060.5425590725
END_ENVIRONMENT

BEGIN_FOCUS
  Ship Enterprise
END_FOCUS

BEGIN_CAMERA
  TARGET Enterprise
  MODE Cockpit
  FOV 45.41
END_CAMERA

BEGIN_MFD Left
  TYPE Orbit
  PROJ Ship
  FRAME Ecliptic
  ALT
  REF Earth
END_MFD

BEGIN_MFD Right
  TYPE User
  MODE CRT
  Mode2 1
  Display 2
  MDUID 1
END_MFD

BEGIN_MFD 3
  TYPE User
  MODE CRT
  Mode2 1
  Display 1
  MDUID 2
END_MFD

BEGIN_MFD 4
  TYPE User
  MODE CRT
  Mode2 2
  Display 4
  MDUID 3
END_MFD

BEGIN_MFD 5
  TYPE User
  MODE CRT
  Mode2 3
  Display 0
  MDUID 4
END_MFD

BEGIN_MFD 6
  TYPE User
  MODE CRT
  Mode2 3
  Display 0
  MDUID 5
END_MFD

BEGIN_MFD 7
  TYPE User
  MODE CRT
  Mode2 3
  Display 0
  MDUID 6
END_MFD

BEGIN_MFD 8
  TYPE User
  MODE CRT
  Mode2 2
  Display 3
  MDUID 8
END_MFD

BEGIN_VC
END_VC

BEGIN_SHIPS
MLP-2:SSU_MLP
  STATUS Landed Earth
  POS -80.6040620 28.6084030
  HEADING 0.00
  ATTACHED 0:0,LC39A
  AFCMODE 7
  NAVFREQ 0 0
  T0_UMB 1 1.0000
END
LCC:SSU_LCC
  STATUS Landed Earth
  POS -80.6040745 28.6083855
  HEADING 270.00
  AFCMODE 7
  NAVFREQ 0 0
  LAUNCH_MJD 57060.513194
  PAD_NAME LC39A
  SHUTTLE_NAME Enterprise
END
LC39A:SSU_Pad
  STATUS Landed Earth
  POS -80.6040720 28.6083850
  HEADING 270.00
  AFCMODE 7
  PRPLEVEL 0:0.000139 1:1.000000
  THLEVEL 2:1.000000 3:1.000000 4:1.000000 5:1.000000 6:1.000000
  NAVFREQ 0 0
  ACCESS_ARM 0 0.0000
  GVA 0 0.0000
  VENTHOOD 0 0.0000
  FSS_OWP 0 0.0000
  RSS_OWP 0 0.0000
  RSS 1 1.0000
  FSS_GH2 1 1.0000
  FSS_IAA 0 0.0000
  EAST_SRB_SFD 1 1.0000
  WEST_SRB_SFD 1 1.0000
  SHUTTLE Enterprise
END
Enterprise:SpaceShuttleUltra
  STATUS Orbiting Earth
  RPOS 5471745.74 -3617502.92 1627594.96
  RVEL -4197.368 -4253.733 4677.692
  AROT -46.29 17.90 101.62
  AFCMODE 7
  PRPLEVEL 0:0.996651 1:0.841317 2:0.840598 3:0.839989 4:1.000000 5:1.000000 6:0.957407 9:0.020000
  NAVFREQ 0 0
  MISSION ORB-GEN
  CONFIGURATION 3
  VC_POS 0
  GEAR 0 0.0000
  OPS 105
  PLB_CAM 0.0000 -90.0000 -0.0000 90.0000 0.0000 -90.0000 0.0000 90.0000
@SUBSYSTEM HeEng_C
  PRESS 1785.501963
  VALVES 1.000000 1.000000 0.000000 0.000000
@ENDSUBSYSTEM        ;HeEng_C
@SUBSYSTEM HeEng_L
  PRESS 1929.055754
  VALVES 1.000000 1.000000 0.000000 0.000000
@ENDSUBSYSTEM        ;HeEng_L
@SUBSYSTEM HeEng_R
  PRESS 1816.510916
  VALVES 1.000000 1.000000 0.000000 0.000000
@ENDSUBSYSTEM        ;HeEng_R
@SUBSYSTEM HePneu
  PRESS 868.523120
  VALVES 1.000000 1.000000 0.000000
@ENDSUBSYSTEM        ;HePneu
@SUBSYSTEM MPS
@ENDSUBSYSTEM        ;MPS
@SUBSYSTEM MPS_C
  SSME config 5
  VIE config 2
  DCU_chA config 0
  DCU_chB config 0
  CIE_chA config 2
  CIE_chB config 1
@ENDSUBSYSTEM        ;MPS_C
@SUBSYSTEM MPS_L
  SSME config 5
  VIE config 2
  DCU_chA config 0
  DCU_chB config 0
  CIE_chA config 2
  CIE_chB config 1
@ENDSUBSYSTEM        ;MPS_L
@SUBSYSTEM MPS_R
  SSME config 5
  VIE config 2
  DCU_chA config 0
  DCU_chB config 0
  CIE_chA config 2
  CIE_chB config 1
@ENDSUBSYSTEM        ;MPS_R
@SUBSYSTEM FMC1
@ENDSUBSYSTEM        ;FMC1
@SUBSYSTEM FMC2
@ENDSUBSYSTEM        ;FMC2
@SUBSYSTEM FMC3
@ENDSUBSYSTEM        ;FMC3
@SUBSYSTEM MMC1
@ENDSUBSYSTEM        ;MMC1
@SUBSYSTEM MMC2
@ENDSUBSYSTEM        ;MMC2
@SUBSYSTEM MMC3
@ENDSUBSYSTEM        ;MMC3
@SUBSYSTEM MMC4
@ENDSUBSYSTEM        ;MMC4
@SUBSYSTEM AMC1
@ENDSUBSYSTEM        ;AMC1
@SUBSYSTEM AMC2
@ENDSUBSYSTEM        ;AMC2
@SUBSYSTEM AMC3
@ENDSUBSYSTEM        ;AMC3
@SUBSYSTEM FF1
@ENDSUBSYSTEM        ;FF1
@SUBSYSTEM FF2
@ENDSUBSYSTEM        ;FF2
@SUBSYSTEM FF3
@ENDSUBSYSTEM        ;FF3
@SUBSYSTEM FF4
@ENDSUBSYSTEM        ;FF4
@SUBSYSTEM FA1
@ENDSUBSYSTEM        ;FA1
@SUBSYSTEM FA2
@ENDSUBSYSTEM        ;FA2
@SUBSYSTEM FA3
@ENDSUBSYSTEM        ;FA3
@SUBSYSTEM FA4
@ENDSUBSYSTEM        ;FA4
@SUBSYSTEM PL1
@ENDSUBSYSTEM        ;PL1
@SUBSYSTEM PL2
@ENDSUBSYSTEM        ;PL2
@SUBSYSTEM LF1
@ENDSUBSYSTEM        ;LF1
@SUBSYSTEM LM1
@ENDSUBSYSTEM        ;LM1
@SUBSYSTEM LA1
@ENDSUBSYSTEM        ;LA1
@SUBSYSTEM OF1
@ENDSUBSYSTEM        ;OF1
@SUBSYSTEM OF2
@ENDSUBSYSTEM        ;OF2
@SUBSYSTEM OF3
@ENDSUBSYSTEM        ;OF3
@SUBSYSTEM OF4
@ENDSUBSYSTEM        ;OF4
@SUBSYSTEM OA1
@ENDSUBSYSTEM        ;OA1
@SUBSYSTEM OA2
@ENDSUBSYSTEM        ;OA2
@SUBSYSTEM OA3
@ENDSUBSYSTEM        ;OA3
@SUBSYSTEM LL1
@ENDSUBSYSTEM        ;LL1
@SUBSYSTEM LL2
@ENDSUBSYSTEM        ;LL2
@SUBSYSTEM LR1
@ENDSUBSYSTEM        ;LR1
@SUBSYSTEM LR2
@ENDSUBSYSTEM        ;LR2
@SUBSYSTEM EIU1
@ENDSUBSYSTEM        ;EIU1
@SUBSYSTEM EIU2
@ENDSUBSYSTEM        ;EIU2
@SUBSYSTEM EIU3
@ENDSUBSYSTEM        ;EIU3
@SUBSYSTEM MTU
  MET_RUNNING 1
  MET0 2537.117317
  MET1 2537.117317
  MET2 2537.117317
EVENT_TIMER0 0.000000 DOWN STOPPED
EVENT_TIMER1 0.000000 DOWN STOPPED
@ENDSUBSYSTEM        ;MTU
@SUBSYSTEM IDP1
  IDP1 SPEC 65535
  IDP1 DISP 65535
@ENDSUBSYSTEM        ;IDP1
@SUBSYSTEM IDP2
  IDP2 SPEC 65535
  IDP2 DISP 65535
@ENDSUBSYSTEM        ;IDP2
@SUBSYSTEM IDP3
  IDP3 SPEC 65535
  IDP3 DISP 18
@ENDSUBSYSTEM        ;IDP3
@SUBSYSTEM IDP4
  IDP4 SPEC 65535
  IDP4 DISP 65535
@ENDSUBSYSTEM        ;IDP4
@SUBSYSTEM IMU1
@ENDSUBSYSTEM        ;IMU1
@SUBSYSTEM IMU2
@ENDSUBSYSTEM        ;IMU2
@SUBSYSTEM IMU3
@ENDSUBSYSTEM        ;IMU3
@SUBSYSTEM GPC1
@ENDSUBSYSTEM        ;GPC1
@SUBSYSTEM GPC2
@ENDSUBSYSTEM        ;GPC2
@SUBSYSTEM GPC3
@ENDSUBSYSTEM        ;GPC3
@SUBSYSTEM GPC4
@ENDSUBSYSTEM        ;GPC4
@SUBSYSTEM GPC5
@ENDSUBSYSTEM        ;GPC5
@SUBSYSTEM MMU1
@ENDSUBSYSTEM        ;MMU1
@SUBSYSTEM MMU2
@ENDSUBSYSTEM        ;MMU2
@SUBSYSTEM SimpleGPCSystem
  @BEGINSOFTWARE MPS_Dump
  @ENDSOFTWARE 
  @BEGINSOFTWARE OrbitDAP
  TGT_ID 2
  BODY_VECT 1
  ROLL 0.000000
  PITCH 0.000000
  YAW 0.000000
  P_ANGLE 0.000000
  Y_ANGLE 0.000000
  OM_ANGLE -1.000000
  DAP_MODE 0 0
  ROT_MODE 0 0 0
  TRANS_MODE 0 0 0
  CONTROL_MODE 0
  CUR_MNVR 0 2.264800 1.069800 2.714461
  @ENDSOFTWARE 
  @BEGINSOFTWARE StateVectorSoftware
  T0_POS -2704732.200366 3050595.768883 -4895795.312045
  @ENDSOFTWARE 
  @BEGINSOFTWARE OMSBurnSoftware
  OMS 0
  PEG7 296.260000 0.000000 0.000000
  Trim 0.000000 -5.700000 5.700000
  BURN_ATT 132.161436 60.741803 153.429808
  WT 35036.171825
  TIG 0 0 42 30.0
  TV_ROLL 0.000000
  MNVR 1 1
  TIMER 
  @ENDSOFTWARE 
  @BEGINSOFTWARE IO_Control
  @ENDSOFTWARE 
  @BEGINSOFTWARE ATVC_SOP
  CONFIG 2
  @ENDSOFTWARE 
  @BEGINSOFTWARE GeneralDisplays
  @ENDSOFTWARE 
@ENDSUBSYSTEM        ;SimpleGPCSystem
@SUBSYSTEM ADPS
  LEFT_AIRDATAPROBE 1 3 0.000000
  RIGHT_AIRDATAPROBE 1 3 0.000000
@ENDSUBSYSTEM        ;ADPS
@SUBSYSTEM ETUmbDoors
  ET_DOORS 0.000000 0.000000
  ET_DOOR_LATCHES 1.000000 0.000000 0.000000
@ENDSUBSYSTEM        ;ETUmbDoors
@SUBSYSTEM -YStarTrackerDoorMotor
@ENDSUBSYSTEM        ;-YStarTrackerDoorMotor
@SUBSYSTEM -ZStarTrackerDoorMotor
@ENDSUBSYSTEM        ;-ZStarTrackerDoorMotor
@SUBSYSTEM ACBusSystem
@ENDSUBSYSTEM        ;ACBusSystem
@SUBSYSTEM INVERTER1
@ENDSUBSYSTEM        ;INVERTER1
@SUBSYSTEM INVERTER2
@ENDSUBSYSTEM        ;INVERTER2
@SUBSYSTEM INVERTER3
@ENDSUBSYSTEM        ;INVERTER3
@SUBSYSTEM ATVC
@ENDSUBSYSTEM        ;ATVC
@SUBSYSTEM PayloadBay
  CARGODOOR 0 0.0000
  RADIATOR 0 0.0000
  RADLATCH 0 0.0000
  KUBAND 0 0.0000
  BAYDOORLATCH0 0 0.0000
  BAYDOORLATCH1 0 0.0000
  BAYDOORLATCH2 0 0.0000
  BAYDOORLATCH3 0 0.0000
@ENDSUBSYSTEM        ;PayloadBay
@SUBSYSTEM APU1
  APU1_State 0
  APU1_FuelPress 0.000000
  APU1_HydPress 0.000000
  APU1_Speed 0.000000
@ENDSUBSYSTEM        ;APU1
@SUBSYSTEM APU2
  APU2_State 0
  APU2_FuelPress 0.000000
  APU2_HydPress 0.000000
  APU2_Speed 0.000000
@ENDSUBSYSTEM        ;APU2
@SUBSYSTEM APU3
  APU3_State 0
  APU3_FuelPress 0.000000
  APU3_HydPress 0.000000
  APU3_Speed 0.000000
@ENDSUBSYSTEM        ;APU3
@SUBSYSTEM WSB1
@ENDSUBSYSTEM        ;WSB1
@SUBSYSTEM WSB2
@ENDSUBSYSTEM        ;WSB2
@SUBSYSTEM WSB3
@ENDSUBSYSTEM        ;WSB3
@SUBSYSTEM LATCH0
  LATCH_STATE1 1 1.0000
  LATCH_STATE2 1 1.0000
  LATCH_STATE3 1 1.0000
  LATCH_STATE4 1 1.0000
  LATCH_STATE5 1 1.0000
@ENDSUBSYSTEM        ;LATCH0
@SUBSYSTEM LATCH1
  LATCH_STATE1 1 1.0000
  LATCH_STATE2 1 1.0000
  LATCH_STATE3 1 1.0000
  LATCH_STATE4 1 1.0000
  LATCH_STATE5 1 1.0000
@ENDSUBSYSTEM        ;LATCH1
@SUBSYSTEM LATCH2
  LATCH_STATE1 1 1.0000
  LATCH_STATE2 1 1.0000
  LATCH_STATE3 1 1.0000
  LATCH_STATE4 1 1.0000
  LATCH_STATE5 1 1.0000
@ENDSUBSYSTEM        ;LATCH2
@SUBSYSTEM RMS
  ARM_STATUS 0.500000 0.013605 0.014688 0.500000 0.500000 0.500000
  SHOULDER_BRACE 1.000000
  GRAPPLE 1 1.0000
  RIGIDIZE 1 1.0000
  EXTEND 1 1.0000
  RMS_ELBOW_CAM 0.0000 0.0000
  RMS_ROLLOUT 0 0.0000
  RMS_LATCHES 0 0.0000
@ENDSUBSYSTEM        ;RMS
@SUBSYSTEM STBD_MPM
  STBD_MPM_ROLLOUT 0 0.0000
  STBD_MPM_LATCHES 0 0.0000
@ENDSUBSYSTEM        ;STBD_MPM
@SUBSYSTEM ODS
  RING_STATE -1 0.0000
@ENDSUBSYSTEM        ;ODS
  @PANEL F2
  "F2_SPDBKTHROT_AUTO" 1
  "F2_BODYFLAP_AUTO" 0
  "F2_PITCH_AUTO" 0
  "F2_PITCH_CSS" 0
  "F2_RY_AUTO" 0
  "F2_RY_CSS" 0
  "Drag Chute ARM Cover" [0]
  "Drag Chute DPY Cover" [0]
  "Drag Chute ARM" 0
  "Drag Chute DPY" 0
  @ENDPANEL 
  @PANEL F3
  "Drag Chute ARM Cover" [0]
  "Drag Chute DPY Cover" [0]
  "Drag Chute JETT Cover" [0]
  "Drag Chute ARM" 0
  "Drag Chute DPY" 0
  "Drag Chute JETT" 0
  @ENDPANEL 
  @PANEL F4
  "F4_SPDBKTHROT_AUTO" 1
  "F4_BODYFLAP_AUTO" 0
  "F4_PITCH_AUTO" 0
  "F4_PITCH_CSS" 0
  "F4_RY_AUTO" 0
  "F4_RY_CSS" 0
  "Drag Chute JETT Cover" [0]
  "Drag Chute JETT" 0
  @ENDPANEL 
  @PANEL F6
  "Cdr Flt Cntlr Pwr" OFF
  "ADI Attitude" LVLH
  "ADI Error" MED
  "ADI Rate" MED
  "Landing Gear ARM Cover" [0]
  "Landing Gear DN Cover" [0]
  "Landing Gear ARM" 0
  "Landing Gear DN" 0
  @ENDPANEL 
  @PANEL F7
  @ENDPANEL 
  @PANEL F8
  "Plt Flt Cntlr Pwr" ON
  "ADI Attitude" LVLH
  "ADI Error" MED
  "ADI Rate" MED
  "Landing Gear ARM Cover" [0]
  "Landing Gear DN Cover" [0]
  "Landing Gear ARM" 0
  "Landing Gear DN" 0
  @ENDPANEL 
  @PANEL R2
  "Boiler1 N2 Supply" OFF
  "Boiler2 N2 Supply" OFF
  "Boiler3 N2 Supply" OFF
  "Boiler1 Cntlr" OFF
  "Boiler2 Cntlr" OFF
  "Boiler3 Cntlr" OFF
  "Boiler1 Cntlr Pwr/Htr" A
  "Boiler2 Cntlr Pwr/Htr" A
  "Boiler3 Cntlr Pwr/Htr" A
  "APU1 Run" OFF
  "APU2 Run" OFF
  "APU3 Run" OFF
  "Hyd Main Pump Press 1" NORM
  "Hyd Main Pump Press 2" NORM
  "Hyd Main Pump Press 3" NORM
  "APU1 Cntlr Pwr " OFF
  "APU2 Cntlr Pwr " OFF
  "APU3 Cntlr Pwr " OFF
  "APU1 Fuel Tank Valve" CLOSE
  "APU2 Fuel Tank Valve" CLOSE
  "APU3 Fuel Tank Valve" CLOSE
  "ET Umb Centerline Latch" GND
  "ET Umb Left Door" OFF
  "ET Umb Left Door Latch" OFF
  "ET Umb Right Door" OFF
  "ET Umb Right Door Latch" OFF
  "MPS Pwr Left AC2" [0]
  "MPS Pwr Ctr AC1" [0]
  "MPS Pwr Right AC3" [0]
  "MPS Pwr Left AC3" [0]
  "MPS Pwr Ctr AC2" [0]
  "MPS Pwr Right AC1" [0]
  "MPS He Isol A Left" GPC
  "MPS He Isol A Ctr" GPC
  "MPS He Isol A Right" GPC
  "MPS He Isol B Left" GPC
  "MPS He Isol B Ctr" GPC
  "MPS He Isol B Right" GPC
  "MPS PRPLT Dump Sequence" GPC
  "MPS PRPLT Backup LH2 vlv" GPC
  "Pneu L Eng He XOVR" GPC
  "Pneu He Isol" OPEN
  "He Interconnect Left" GPC
  "He Interconnect Ctr" GPC
  "He Interconnect Right" GPC
  "LH2 Ullage Press" AUTO
  @ENDPANEL 
  @PANEL C2
  "IDP/CRT 1 Power" ON
  "IDP/CRT 2 Power" ON
  "IDP/CRT 3 Power" ON
  "IDP/CRT 1 Maj Func" GNC
  "IDP/CRT 2 Maj Func" GNC
  "IDP/CRT 3 Maj Func" GNC
  "Left CRT Sel" 1
  "Right CRT Sel" 2
  @ENDPANEL 
  @PANEL C3
  "LOMS Arm" ARM/PRESS
  "ROMS Arm" ARM/PRESS
  "BFC CRT Display" OFF
  "BFC CRT Select" 2+3
  "LADP Stow Enable" INHIBIT
  "RADP Stow Enable" INHIBIT
  "LADP Deploy" STOW
  "RADP Deploy" STOW
  "MAIN ENGINE LIMIT SHUT DN" AUTO
  "SSME Left S/D PB Cover" [0]
  "SSME Ctr S/D PB Cover" [0]
  "SSME Right S/D PB Cover" [0]
  "SRB Separation" AUTO
  "SRB Separation PB Cover" [0]
  "ET Separation" AUTO
  "ET Separation PB Cover" [0]
  @ENDPANEL 
  @PANEL O3
  "RCS/OMS/PRESS" OMS PRPLT
  "RCS/OMS PRPLT QTY" OMS FUEL
  @ENDPANEL 
  @PANEL O6
  "L GLRSHLD FLOOD" VAR
  "S TRK DR CNTL SYS1 Cover" [0]
  "S TRK DR CNTL SYS2 Cover" [0]
  "S TRK DR CNTL SYS1" OFF
  "S TRK DR CNTL SYS2" OFF
  "GPC_POWER_1_COVER" [0]
  "GPC_POWER_2_COVER" [0]
  "GPC_POWER_3_COVER" [0]
  "GPC_POWER_4_COVER" [0]
  "GPC_POWER_5_COVER" [0]
  "GPC POWER 1" ON
  "GPC POWER 2" ON
  "GPC POWER 3" ON
  "GPC POWER 4" ON
  "GPC POWER 5" ON
  "GPC_OUTPUT_1_COVER" [0]
  "GPC_OUTPUT_2_COVER" [0]
  "GPC_OUTPUT_3_COVER" [0]
  "GPC_OUTPUT_4_COVER" [0]
  "GPC_OUTPUT_5_COVER" [0]
  "GPC OUTPUT 1" NORMAL
  "GPC OUTPUT 2" NORMAL
  "GPC OUTPUT 3" NORMAL
  "GPC OUTPUT 4" NORMAL
  "GPC OUTPUT 5" BACKUP
  "IPL SOURCE" OFF
  "GPC MODE 1" RUN
  "GPC MODE 2" RUN
  "GPC MODE 3" RUN
  "GPC MODE 4" RUN
  "GPC MODE 5" RUN
  @ENDPANEL 
  @PANEL O17
  "EIU L-C" ON
  "EIU C-R" ON
  "EIU R-L" ON
  @ENDPANEL 
  @PANEL R11
  "IDP/CRT 4 Power" ON
  "IDP/CRT 4 Maj Func" GNC
  @ENDPANEL 
  @PANEL R13L
  "PL Bay Door SYS 1" DISABLE
  "PL Bay Door SYS 2" DISABLE
  "PL Bay Mech PWR SYS 1" OFF
  "PL Bay Mech PWR SYS 2" OFF
  "PL Bay Door" STOP
  "Latch Control SYS A" OFF
  "Latch Control SYS B" OFF
  "Radiator Control SYS A" OFF
  "Radiator Control SYS B" OFF
  "KU Antenna Direct Stow" OFF
  "KU Antenna" GND
  @ENDPANEL 
  @PANEL A6
  "SENSE" -X
  "Aft Flt Cntlr Pwr" OFF
  "Payload Ret Latch 1" OFF
  "Payload Ret Latch 2" OFF
  "Payload Ret Latch 3" OFF
  "Payload Ret Latch 4" OFF
  "Payload Ret Latch 5" OFF
  "Payload Select" 1
  "ADI Attitude" LVLH
  "ADI Error" MED
  "ADI Rate" MED
  @ENDPANEL 
  @PANEL AftMDU
  @ENDPANEL 
  @PANEL A7U
  "PLBD FLOOD FWD STBD" OFF
  "PLBD FLOOD FWD PORT" OFF
  "PLBD FLOOD MID STBD" OFF
  "PLBD FLOOD MID PORT" OFF
  "PLBD FLOOD AFT STBD" OFF
  "PLBD FLOOD AFT PORT" OFF
  "PLBD FWD BHD" OFF
  "PLBD DOCKING" OFF
  "RMS SPOTLIGHT PORT" OFF
  @ENDPANEL 
  @PANEL A4
  "Mission Timer" MET
  @ENDPANEL 
  @PANEL A8
  "Port MPM Deploy Cover" [0]
  "Stbd MPM Deploy Cover" [0]
  "Port RMS Latches" OFF
  "Stbd MPM Latches" OFF
  "Port MPM Deploy" OFF
  "Stbd MPM Deploy" OFF
  "EE Mode" OFF
  "RMS SELECT" OFF
  "Parameter" POSITION
  "Joint" SHOULDER_YAW
  "RMS Mode" OPR_CMD
  @ENDPANEL 
  @PANEL A7A3/A8A3
  "SYSTEM POWER MNA" [1]
  "SYSTEM POWER MNB" [1]
  "PYRO POWER MNA" [0]
  "PYRO POWER MNC" [0]
  "SYS1 VENT ISOL" [1]
  "SYS1 VENT" [1]
  "SYS2 VENT ISOL" [1]
  "SYS2 VENT" [1]
  "PSU POWER MNA" [0]
  "PSU POWER MNB" [0]
  "LIGHTS AIRLOCK 1-4" [0]
  "LIGHTS AIRLOCK 2-3" [0]
  "LIGHTS DOCKING TRUSS FWD" [0]
  "LIGHTS DOCKING TRUSS AFT" [0]
  "ARLK/TNL FAN A" [0]
  "ARLK/TNL FAN B" [0]
  "LIGHTS C/L VESTIBULE PORT" [0]
  "LIGHTS C/L VESTIBULE STBD" [0]
  "CNTL PNL PWR A" OFF
  "CNTL PNL PWR B" OFF
  "CNTL PNL PWR C" OFF
  "HTRS/DCU PWR H1" OFF
  "HTRS/DCU PWR H2/DCU" OFF
  "HTRS/DCU PWR H3/DCU" OFF
  "APDS PWR A" OFF
  "APDS PWR B" OFF
  "APDS PWR C" OFF
  "PYROS Ap" [0]
  "PYROS Bp" [0]
  "PYROS Cp" [0]
  @ENDPANEL 
END
ET:SSU_SLWT
  STATUS Orbiting Earth
  RPOS 5460651.07 -3621188.47 1632546.34
  RVEL -4211.258 -4249.506 4677.615
  AROT 145.12 -84.40 -140.42
  VROT 0.12 -3.79 1.36
  AFCMODE 7
  PRPLEVEL 0:0.033313
END
END_SHIPS

BEGIN_DX9ExtMFD
END

BTW I am using the stable SSU 3.0 posted and linked in OH.

GLS · Jan 29, 2016

STS said:

Code:

Name=ORB-GEN
EnableWingPainting=TRUE
Orbiter=Discovery
UseRMS=true
UseSTBDMPM=true
UseODS=true
ODSZPos=10.6
TargetInc=28.400000
TargetLAN=0.000000
MECOAlt=105000.000000
MECOVel=7918.543974
MECOFPA=1.053688
UseOMS=true
OMSAssistStart=133.000000
OMSAssistEnd=298.000000
PerformRollToHeadsUp=true

I noticed there are some old parameters in this mission file: EnableWingPainting, ODSZPos and UseOMS can be deleted as they do nothing, and OMSAssistStart and OMSAssistEnd were replaced by similar parameters to the ones used by the real shuttle (OMSAssistEnable and OMSAssistDuration). The OMS assist start time is always MM103+10s.
There is list with all of the available parameters in the manual.

Urwumpe · Jan 29, 2016

The trim data for the OMS burn looks strange, to start with...
WT is also far too low, where did you get this data?

Together, with a WT about 10 times lower than it should be, it is natural why you have about ten times less burn time. Also with wrong trim data, the OMS burn will also be calculated with the wrong trim in the solution.

GLS · Jan 29, 2016

STS said:
And Strange thing on OMS-2.

With a DVx of 296.26 fps to circularise the orbit, I have a burn solution of only 26 seconds, and efectively the burn is too short.

I think the DV is calculated properly because the GPC predicts a good target orbit.

Code:

WT 35036.171825

BTW I am using the stable SSU 3.0 posted and linked in OH.

The problem is the mass that the GPCs think the vehicle has.... I've seen this somewhere but I can't remember where. Was this scenario saved/loaded in MM102, 103 or 104? If so, then it could be (another) problem stemming from the MPS state save issues...

---------- Post added at 11:46 PM ---------- Previous post was at 11:44 PM ----------

Urwumpe said:
The trim data for the OMS burn looks strange, to start with...
WT is also far too low, where did you get this data?

Together, with a WT about 10 times lower than it should be, it is natural why you have about ten times less burn time. Also with wrong trim data, the OMS burn will also be calculated with the wrong trim in the solution.

If the c.g. is not where it usually is, then the trim should also not be as it usually is.

STS · Jan 30, 2016

Urwumpe said:
The trim data for the OMS burn looks strange, to start with...
WT is also far too low, where did you get this data?

Together, with a WT about 10 times lower than it should be, it is natural why you have about ten times less burn time. Also with wrong trim data, the OMS burn will also be calculated with the wrong trim in the solution.

I was doing the burn as in previous SSU versions (1.25 and 2.0). It´s cool that it has been improved so much.

WT is the Orbiter weight? Where to get it (Control+I and convert units)? And how to get the correct trims?

Thanks for help.

---------- Post added at 12:50 AM ---------- Previous post was at 12:48 AM ----------

GLS said:
The problem is the mass that the GPCs think the vehicle has.... I've seen this somewhere but I can't remember where. Was this scenario saved/loaded in MM102, 103 or 104? If so, then it could be (another) problem stemming from the MPS state save issues...

The scenario was saved on 105.

---------- Post added at 01:06 AM ---------- Previous post was at 12:50 AM ----------

Working converting the vessel mass to pounds and entering it in ITM 9.

Waiting for response on the question about the Trims: on the STS-135 ascent checklist, on page 87 shows that trims should be P+0.4 LY -5.7 RY +5.7, so I think my trims are more-less correct.

GLS · Jan 30, 2016

AFAIK the trims are calculated automatically in SSU.

DaveS · Jan 30, 2016

GLS said:
AFAIK the trims are calculated automatically in SSU.

No, this is not the case. Only the weight is calculated upon entering MM104/105/202. Trim data along with the rest of the burn data has to be entered manually which creates a significant challenge for the OMS-1 burn (TIG of 000/00:10:30).

RSLS Abort

STS

Well-known member

Urwumpe

Not funny anymore

STS

Well-known member

GLS

Well-known member

Urwumpe

Not funny anymore

STS

Well-known member

GLS

Well-known member

Urwumpe

Not funny anymore

STS

Well-known member

GLS

Well-known member

Urwumpe

Not funny anymore

GLS

Well-known member

STS

Well-known member

GLS

Well-known member

DaveS

Addon Developer

Similar threads