Look like one texture from orulex is missing.
Do you making for spacecraft3 module or?
Try this it's for spacecraft3,so your ini file must have .ini file not .cfg
So this save as: (name).ini (exp: PS1.ini)
And put it in spacecraft direcory.
Code:
[CONFIG]
MESHNAME=PS1
SIZE=7
EMPTY_MASS=1500
FUEL_MASS=2000
MAIN_THRUST=40000
RETRO_THRUST=0
HOVER_THRUST=0
ATTITUDE_THRUST=300
ISP=50
TRIM=0.05
PITCH_MOMENT_SCALE=0.00001
BANK_MOMENT_SCALE=0.00002
ROT_DRAG=(0.43,0.43,0.29)
COG=3
WING_ASPECT=0.7
WING_EFFECTIVENESS=2.5
And this save as PS1.cfg and put into Vessels directory.
Code:
; === Configuration file for vessel class PS1 ===
ClassName = PS1
MeshName = PS1
Size = 7
Mass = 1500 ; empty mass [kg]
MaxFuel = 2000 ; max fuel mass [kg]
Isp = 50 ; fuel specific impulse [m/s]
MaxMainThrust = 40000
MaxRetroThrust = 0
MaxHoverThrust = 0
MaxAttitudeThrust = 300
COG_OverGround = 3
LiftFactor = 0.0
RotResistance = 0.43 0.43 0.43
Only one is enought depend what you want spacecraft or orbiter default vessels config.
and you need to make proper scenario file to start it.