OHM Jarvis 3.0 Dll Version - Final Beta

Option 3 won't produce any smoke effect: since with this option the user may put the ramp anywhere smoke effects could have produced non realistic effects. Choose option 1 and then, once launched the scenario, turn the launchpad with the scenario editor
 
fred18 said:
I'm not sure i well understood what the issue is, the countdown is stopped and the launch does not happen? What does the launch window says? Could you post the scenario file that you are running please?
Click to expand...

Yeah, you got it right, here's the file.

It's non standard, but I didn't really change anything when I copied the Jarvis out of the standard scenario, and it worked sometimes previously.

Code: 
BEGIN_DESC
-words-
END_DESC

BEGIN_ENVIRONMENT
  System Sol
  Date MJD 63255.1149
END_ENVIRONMENT

BEGIN_FOCUS
  Ship Jarvis_E
END_FOCUS

BEGIN_CAMERA
  TARGET Jarvis_E
  MODE Cockpit
  FOV 40.00
END_CAMERA

BEGIN_HUD
  TYPE Docking
  REF TrinStation3 3
END_HUD

BEGIN_MFD Left
  TYPE User
  MODE LaunchMFD
  BOOLALT 0
  BOOLENG 0
  HOV 0
  BOOLLNC 0
  BOOLTGT 1
  BOOLACT 1
  BOOLHUD 1
  BOOLPTC 1
  BOOLCOR 0
  ALOCK 0
  PVIEW 0
  INCL 1.00
  LNCT 0.00
  IFACT 1.00
  AFACT 10.00
  PEA 219990.98
  APA 219990.98
  TGT TrinStation3
END_MFD

BEGIN_MFD Right
  TYPE Orbit
  PROJ Ship
  FRAME Ecliptic
  ALT
  REF Earth
END_MFD

BEGIN_PANEL
END_PANEL

BEGIN_SHIPS
ISS:ProjectAlpha_ISS
  STATUS Orbiting Earth
  RPOS -5052375.90 4437501.43 -272639.45
  RVEL 4887.851 5404.283 -2472.271
  AROT 109.61 -8.53 80.06
  AFCMODE 7
  PRPLEVEL 0:1.000000
  IDS 0:588 100 1:586 100 2:584 100 3:582 100 4:580 100
  NAVFREQ 0 0
  XPDR 466
END
Jarvis_E:JARVIS/Jarvis_E
  STATUS Landed Earth
  POS -14.4197900 -7.9638700
  HEADING 220.00
  AFCMODE 7
  PRPLEVEL 0:1.000000 1:1.000000 2:1.000000 3:1.000000 4:1.000000 5:1.000000
  NAVFREQ 0 0 0 0
  XPDR 0
  FAIRINGON 1
  STAGE 0
  GLIMIT 5
  GTVACC 8
  MET -60
  TGT_APOGEE 500000
  TGT_PERIGEE 421000
  TGT_INC 57.06
  BOOSTERS
  LAUNCH_SITE 3
  PAYLOAD_FILE Jarvis_E/TrinStation4.ini
END
Wideawake_Int(AU):AscensionUltra
  STATUS Landed Earth
  POS -14.4050000 -7.9550000
  HEADING 220.00
  AFCMODE 7
  NAVFREQ 0 0 0 0
  XPDR 0
  HANGAR 0
  	DOOR 0
  		POS 0.0000
  		CMD 0.0000
  	DOOR 1
  		POS 0.0000
  		CMD 0.0000
  	DOOR 2
  		POS 0.0000
  		CMD 0.0000
  	DOOR 3
  		POS 0.0000
  		CMD 0.0000
  	DOOR 4
  	ROOM 0
  	ROOM 1
  	ROOM 2
  	CRANE 0
  		POS 0.0000 0.0000 0.0000
  	CRANE 1
  HANGAR 1
  	DOOR 0
  		POS 0.0000
  		CMD 0.0000
  	DOOR 1
  		POS 0.0000
  		CMD 0.0000
  	DOOR 2
  		POS 0.0000
  		CMD 0.0000
  	DOOR 3
  		POS 0.0000
  		CMD 0.0000
  	DOOR 4
  	ROOM 0
  	ROOM 1
  	ROOM 2
  	CRANE 0
  		POS 0.0000 0.0000 0.0000
  	CRANE 1
  HANGAR 2
  	DOOR 0
  		POS 0.0000
  		CMD 0.0000
  	DOOR 1
  		POS 0.0000
  		CMD 0.0000
  	DOOR 2
  		POS 0.0000
  		CMD 0.0000
  	DOOR 3
  		POS 0.0000
  		CMD 0.0000
  	DOOR 4
  	ROOM 0
  	ROOM 1
  	ROOM 2
  	CRANE 0
  		POS 0.0000 0.0000 0.0000
  	CRANE 1
  HANGAR 3
  LEASE 0
  	DOOR 0
  		POS 0.0000
  		CMD 0.0000
  	DOOR 1
  		POS 0.0000
  		CMD 0.0000
  	DOOR 2
  	ROOM 0
  LEASE 1
  	DOOR 0
  		POS 0.0000
  		CMD 0.0000
  	DOOR 1
  		POS 0.0000
  		CMD 0.0000
  	DOOR 2
  	ROOM 0
  LEASE 2
  	DOOR 0
  		POS 0.0000
  		CMD 0.0000
  	DOOR 1
  		POS 0.0000
  		CMD 0.0000
  	DOOR 2
  	ROOM 0
  LEASE 3
  	DOOR 0
  		POS 0.0000
  		CMD 0.0000
  	DOOR 1
  		POS 0.0000
  		CMD 0.0000
  	DOOR 2
  	ROOM 0
  LEASE 4
  	DOOR 0
  		POS 0.0000
  		CMD 0.0000
  	DOOR 1
  		POS 0.0000
  		CMD 0.0000
  	DOOR 2
  	ROOM 0
  LEASE 5
  	DOOR 0
  		POS 1.0000
  		CMD 0.0000
  	DOOR 1
  		POS 0.0000
  		CMD 0.0000
  	DOOR 2
  	ROOM 0
  LEASE 6
  	DOOR 0
  		POS 0.0000
  		CMD 0.0000
  	DOOR 1
  	ROOM 0
  LEASE 7
  	DOOR 0
  		POS 0.0000
  		CMD 0.0000
  	DOOR 1
  	ROOM 0
  LEASE 8
  	DOOR 0
  		POS 0.0000
  		CMD 0.0000
  	DOOR 1
  	ROOM 0
  LEASE 9
  LAUNCHTUNNEL 0
  	DOOR 0
  		POS 0.0000
  		CMD 0.0000
  	DOOR 1
  		POS 0.0000
  		CMD 0.0000
  	DOOR 2
  		POS 0.0000
  		CMD 0.0000
  	DOOR 3
  		POS 0.0000
  		CMD 0.0000
  	DOOR 4
  	ROOM 0
  	ROOM 1
  	ROOM 2
  LAUNCHTUNNEL 1
  DRADAR 0
  		TGT TrinStation2
  DRADAR 1
  		TGT TrinStation2
  DRADAR 2
  VERTICALLAUNCH 0
  	DOOR 0
  		POS 0.0000
  		CMD 0.0000
  	DOOR 1
  	ROOM 0
  	ROOM 1
  VERTICALLAUNCH 1
  	DOOR 0
  		POS 1.0000
  		CMD 0.0000
  	DOOR 1
  	ROOM 0
  	ROOM 1
  VERTICALLAUNCH 2
  VERTICALLAUNCH 2
  AIRPORT 0
  	DOOR 0
  	ROOM 0
  	ROOM 1
  AIRPORT 1
END
TrinStation3:IMS\SBB41B\BM201_CONTROL_MODULE
  STATUS Orbiting Earth
  RPOS -3694946.71 5674652.20 167570.28
  RVEL 5884.369 3933.425 -2966.994
  AROT -91.24 58.80 47.06
  AFCMODE 7
  PRPLEVEL 0:0.999998 1:1.000000 2:0.999998
  DOCKINFO 0:0,Antares-SR 3:0,BAS Hadfield
  NAVFREQ 0 0
  COMMAND 1 0
  MODULE SBB41B\BN200_Big_Node 0,0,-7.276 0,1,0 0,0,-1 0
  MODULE SBB41B\BT301_LargeTrussToSmallTruss -5.185,0,-7.276 1,0,0 0,1,0 0
  MODULE Docking_Adapter_APAS 3.15,0,-7.276 1,0,0 0,0,-1 0
  MODULE SolarArrayRect -8.685,0,-7.276 -1,0,0 0,0,-1 0
  MODULE SBB41B\BM011_Consumables 0,0,-11.8516 0,0,1 0,1,0 0
  MODULE SolarArrayRect -16.285,0,-7.276 -1,0,0 0,0,-1 0
  MODULE Radiator_High-Temp_64 -23.885,0,-7.276 -1,0,0 0,0,-1 0
  DELETEPOINT 2
  ATTPOINT IM 0,2.2,-7.276 0,1,0 1,0,0
  ATTPOINT IM 0,-2.2,-7.276 0,-1,0 1,0,0
  ATTPOINT IM 0,0,-14.2272 0,0,-1 1,0,0
  DELETEPORT 1
  CONSTRUCTIONPORT 0,2.2,-7.276 0,1,0 1,0,0
  CONSTRUCTIONPORT 0,-2.2,-7.276 0,-1,0 1,0,0
  DOCKPORT 4.1,0,-7.276 1,0,0 0,0,-1
  CONSTRUCTIONPORT 0,0,-14.2272 0,0,-1 1,0,0
  EMPTYMASS 22150.000000
  MASSCENTER 0.000000 0.000000 0.000000
  PMI 14.490000 51.390000 45.070000
  ANIM 3 SolarArrayRect 1 1
  ANIM 5 SolarArrayRect 0 0
  ANIM 6 Radiator_High-Temp_64 1 1
  CONSUMABLES 700 699.999 0 3000 3000 0 500 499.999 0
  TEMPERATURES -1:315.45:369.95 3:330.88:330.00 4:281.69:369.95 5:315.69:330.00
  RADIATOR 6 296.496 0 0 -1 -1 4
  HEATING no
  THGROUPLEVELS 0 0 0 0 
  CREW 2 0
  ENERGY 395188646.511516
  SOLARARRAY 3 1 0 0.576053 0.576053 0.834043 0.834043
  SOLARARRAY 5 0 1 0.000000 0.000000 0.000000 0.000000
  MFC 0 0 0 -1 -1 -1 -1
  MFC 1 0 5 -1 -1 -1 -1
  MFC 0 0 0 -1 -1 -1 -1
  MFC 0 1 7 0 0 0 -1
  MFC 0 0 0 -1 -1 -1 -1
  MFC 0 0 0 -1 -1 -1 -1
  MFC 0 0 0 -1 -1 -1 -1
  MFC 0 0 0 -1 -1 -1 -1
  MFC 0 0 0 -1 -1 -1 -1
  MFC 0 0 0 -1 -1 -1 -1
  MFC 0 0 0 -1 -1 -1 -1
  MFC 0 0 0 -1 -1 -1 -1
  MFC 0 0 0 -1 -1 -1 -1
  MFC 0 1 6 0 0 10 -1
END
Antares-SR:vessels\antaresSR
  UMMUCREW Com-Commander-41-65-74
  UMMUCREW Com-Pilot-27-67-55
  UMMUCREW Com-MS1-15-70-45
  STATUS Orbiting Earth
  RPOS -3694957.30 5674645.79 167570.14
  RVEL 5884.369 3933.425 -2966.994
  AROT 88.76 -58.80 42.94
  RCSMODE 0
  AFCMODE 7
  PRPLEVEL 0:0.508359
  DOCKINFO 0:0,TrinStation3
  NAVFREQ 0 0
  EXTPWRSRC_MODE 0
  CONFIGURATION 0
  ASTRONAUT_INT 1
  COM 0
  PIL 0
  MS1 0
  MS2 0
  MS3 0
  MS4 0
  COM_ABOARD 1
  PIL_ABOARD 1
  MS1_ABOARD 1
  MS2_ABOARD 0
  MS3_ABOARD 0
  MS4_ABOARD 0
  INTERNAL_POWER 1
  O2TIME_VAR 0.0000
  OXY_VAR 0.0000
  O2RTIME 1117501.3312
  FUELRTIMER 0.0000
  KR 0
  HL 0
  PG 0
  RG 0
  ONP 0
  ONM 0
  ONMVC 1 1.0000
  PRESSBUTSTATE 0
  DOCKINGHATCH 1 1.0000
  antenna 1 1.0000
  SR_spa1 1 1.0000
  SR_spa2 1 1.0000
  SR_spa3 1 1.0000
  SR_spa4 1 1.0000
  SR_spa5 1 1.0000
  SR_spa6 1 1.0000
  SR_spb1 1 1.0000
  SR_spb2 1 1.0000
  SR_spb3 1 1.0000
  SR_spb4 1 1.0000
  SR_spb5 1 1.0000
  SR_spb6 1 1.0000
END
END_SHIPS
 
Hey fred18,if I save the scenario after moving it,will the pad still be at 180 degrees?when I start the new saved scenario?Thanks
 
I'm really sorry to ask the obvious but...

Did you press P to start the autopilot?

To have the autopilot automatically running at the scenario opening there must be the line AP 1 in the scenario file and I don't see it, so you need to press P to start the countdown

---------- Post added at 20:03 ---------- Previous post was at 20:00 ----------
Interceptor said:
Hey fred18,if I save the scenario after moving it,will the pad still be at 180 degrees?when I start the new saved scenario?Thanks
Click to expand...

Yes: the option "launch_site" allows to create ramps easily without boring times creating every single item but once used the scenario is saved and created in the usual way, and in the next run. you'll find everything as saved!
 
fred18 said:
I'm really sorry to ask the obvious but...

Did you press P to start the autopilot?

To have the autopilot automatically running at the scenario opening there must be the line AP 1 in the scenario file and I don't see it, so you need to press P to start the countdown
Click to expand...

That I did. I did RTFM before starting, but it's just this weird little hitch that's been happening a bit. I'll try using AP 1 and see if it helps.
 
Last edited:
Hmm sorry to ask but what is RTFM?

And another question that comes to my mind: how do you close orbiter? Did you perform a launch, then close the scenario and immediatly re run a pre-launch scenario? Because if you simply quit a scenario and reopen a pre-launch scenario it may not work due to the public variable of the autopilot state. You need to close orbiter completely and re open it.
 
fred18 said:
Hmm sorry to ask but what is RTFM?

And another question that comes to my mind: how do you close orbiter? Did you perform a launch, then close the scenario and immediatly re run a pre-launch scenario? Because if you simply quit a scenario and reopen a pre-launch scenario it may not work due to the public variable of the autopilot state. You need to close orbiter completely and re open it.
Click to expand...

Yeah, what Dave said. I tend to make really dumb mistakes when I code scenarios since I'm not quite used to it yet.

In this case, I just managed to fly the flight, AP 1 did work. I also tested starting a flight, then exiting and restarting without closing orbiter, and the same problem was exhibited. Upon closing it and doing this again, the manual autopilot engaged without an issue. Thanks for the help fred, It seems just for now on I'll add AP 1 to my scenarios using the DLL Jarvis.
 
Well it seems to me that more than AP 1 the real solution is to quit and reopen orbiter every time you want to make a launch with the jarvis dll. Anyway glad to help
 
When you were making the Delphinus lifting body, did you use any computational fluid dynamics software?

edit: never mind, it's similar aerodynamics parameters to liber's Dream Chaser add-on, which are actually taken from a spacecraft3 tutorial example.
 
Last edited:
You must log in or register to reply here.

Similar threads

DecoFox
Problem My vessel DLL crashes on launch, but only sometimes
2
Replies
34
Views
9K
Blake
B
jacquesmomo
SDK Question Why my DLL is so big ?
Replies
8
Views
4K
Urwumpe
Urwumpe
CurlSnout
General Question Off parameter in Multistage 2015 ???
Replies
2
Views
2K
CurlSnout
CurlSnout
CaptainSwag101
  • Locked
NASSP Quick-Start Guide and Extra Info for Newcomers
Replies
1
Views
9K
rcflyinghokie
rcflyinghokie
DecoFox
SDK Question Virtual Cockpit best practices
Replies
9
Views
4K
misha.physics
misha.physics
Back
Top