Option 3 won't produce any smoke effect: since with this option the user may put the ramp anywhere smoke effects could have produced non realistic effects. Choose option 1 and then, once launched the scenario, turn the launchpad with the scenario editor
OHM Jarvis 3.0 Dll Version - Final Beta
- Thread starter OrbitHangar
- Start date
Napalm42
Drell Admiral, Citadel Fleet
Yeah, you got it right, here's the file.
It's non standard, but I didn't really change anything when I copied the Jarvis out of the standard scenario, and it worked sometimes previously.
Code:
BEGIN_DESC
-words-
END_DESC
BEGIN_ENVIRONMENT
System Sol
Date MJD 63255.1149
END_ENVIRONMENT
BEGIN_FOCUS
Ship Jarvis_E
END_FOCUS
BEGIN_CAMERA
TARGET Jarvis_E
MODE Cockpit
FOV 40.00
END_CAMERA
BEGIN_HUD
TYPE Docking
REF TrinStation3 3
END_HUD
BEGIN_MFD Left
TYPE User
MODE LaunchMFD
BOOLALT 0
BOOLENG 0
HOV 0
BOOLLNC 0
BOOLTGT 1
BOOLACT 1
BOOLHUD 1
BOOLPTC 1
BOOLCOR 0
ALOCK 0
PVIEW 0
INCL 1.00
LNCT 0.00
IFACT 1.00
AFACT 10.00
PEA 219990.98
APA 219990.98
TGT TrinStation3
END_MFD
BEGIN_MFD Right
TYPE Orbit
PROJ Ship
FRAME Ecliptic
ALT
REF Earth
END_MFD
BEGIN_PANEL
END_PANEL
BEGIN_SHIPS
ISS:ProjectAlpha_ISS
STATUS Orbiting Earth
RPOS -5052375.90 4437501.43 -272639.45
RVEL 4887.851 5404.283 -2472.271
AROT 109.61 -8.53 80.06
AFCMODE 7
PRPLEVEL 0:1.000000
IDS 0:588 100 1:586 100 2:584 100 3:582 100 4:580 100
NAVFREQ 0 0
XPDR 466
END
Jarvis_E:JARVIS/Jarvis_E
STATUS Landed Earth
POS -14.4197900 -7.9638700
HEADING 220.00
AFCMODE 7
PRPLEVEL 0:1.000000 1:1.000000 2:1.000000 3:1.000000 4:1.000000 5:1.000000
NAVFREQ 0 0 0 0
XPDR 0
FAIRINGON 1
STAGE 0
GLIMIT 5
GTVACC 8
MET -60
TGT_APOGEE 500000
TGT_PERIGEE 421000
TGT_INC 57.06
BOOSTERS
LAUNCH_SITE 3
PAYLOAD_FILE Jarvis_E/TrinStation4.ini
END
Wideawake_Int(AU):AscensionUltra
STATUS Landed Earth
POS -14.4050000 -7.9550000
HEADING 220.00
AFCMODE 7
NAVFREQ 0 0 0 0
XPDR 0
HANGAR 0
DOOR 0
POS 0.0000
CMD 0.0000
DOOR 1
POS 0.0000
CMD 0.0000
DOOR 2
POS 0.0000
CMD 0.0000
DOOR 3
POS 0.0000
CMD 0.0000
DOOR 4
ROOM 0
ROOM 1
ROOM 2
CRANE 0
POS 0.0000 0.0000 0.0000
CRANE 1
HANGAR 1
DOOR 0
POS 0.0000
CMD 0.0000
DOOR 1
POS 0.0000
CMD 0.0000
DOOR 2
POS 0.0000
CMD 0.0000
DOOR 3
POS 0.0000
CMD 0.0000
DOOR 4
ROOM 0
ROOM 1
ROOM 2
CRANE 0
POS 0.0000 0.0000 0.0000
CRANE 1
HANGAR 2
DOOR 0
POS 0.0000
CMD 0.0000
DOOR 1
POS 0.0000
CMD 0.0000
DOOR 2
POS 0.0000
CMD 0.0000
DOOR 3
POS 0.0000
CMD 0.0000
DOOR 4
ROOM 0
ROOM 1
ROOM 2
CRANE 0
POS 0.0000 0.0000 0.0000
CRANE 1
HANGAR 3
LEASE 0
DOOR 0
POS 0.0000
CMD 0.0000
DOOR 1
POS 0.0000
CMD 0.0000
DOOR 2
ROOM 0
LEASE 1
DOOR 0
POS 0.0000
CMD 0.0000
DOOR 1
POS 0.0000
CMD 0.0000
DOOR 2
ROOM 0
LEASE 2
DOOR 0
POS 0.0000
CMD 0.0000
DOOR 1
POS 0.0000
CMD 0.0000
DOOR 2
ROOM 0
LEASE 3
DOOR 0
POS 0.0000
CMD 0.0000
DOOR 1
POS 0.0000
CMD 0.0000
DOOR 2
ROOM 0
LEASE 4
DOOR 0
POS 0.0000
CMD 0.0000
DOOR 1
POS 0.0000
CMD 0.0000
DOOR 2
ROOM 0
LEASE 5
DOOR 0
POS 1.0000
CMD 0.0000
DOOR 1
POS 0.0000
CMD 0.0000
DOOR 2
ROOM 0
LEASE 6
DOOR 0
POS 0.0000
CMD 0.0000
DOOR 1
ROOM 0
LEASE 7
DOOR 0
POS 0.0000
CMD 0.0000
DOOR 1
ROOM 0
LEASE 8
DOOR 0
POS 0.0000
CMD 0.0000
DOOR 1
ROOM 0
LEASE 9
LAUNCHTUNNEL 0
DOOR 0
POS 0.0000
CMD 0.0000
DOOR 1
POS 0.0000
CMD 0.0000
DOOR 2
POS 0.0000
CMD 0.0000
DOOR 3
POS 0.0000
CMD 0.0000
DOOR 4
ROOM 0
ROOM 1
ROOM 2
LAUNCHTUNNEL 1
DRADAR 0
TGT TrinStation2
DRADAR 1
TGT TrinStation2
DRADAR 2
VERTICALLAUNCH 0
DOOR 0
POS 0.0000
CMD 0.0000
DOOR 1
ROOM 0
ROOM 1
VERTICALLAUNCH 1
DOOR 0
POS 1.0000
CMD 0.0000
DOOR 1
ROOM 0
ROOM 1
VERTICALLAUNCH 2
VERTICALLAUNCH 2
AIRPORT 0
DOOR 0
ROOM 0
ROOM 1
AIRPORT 1
END
TrinStation3:IMS\SBB41B\BM201_CONTROL_MODULE
STATUS Orbiting Earth
RPOS -3694946.71 5674652.20 167570.28
RVEL 5884.369 3933.425 -2966.994
AROT -91.24 58.80 47.06
AFCMODE 7
PRPLEVEL 0:0.999998 1:1.000000 2:0.999998
DOCKINFO 0:0,Antares-SR 3:0,BAS Hadfield
NAVFREQ 0 0
COMMAND 1 0
MODULE SBB41B\BN200_Big_Node 0,0,-7.276 0,1,0 0,0,-1 0
MODULE SBB41B\BT301_LargeTrussToSmallTruss -5.185,0,-7.276 1,0,0 0,1,0 0
MODULE Docking_Adapter_APAS 3.15,0,-7.276 1,0,0 0,0,-1 0
MODULE SolarArrayRect -8.685,0,-7.276 -1,0,0 0,0,-1 0
MODULE SBB41B\BM011_Consumables 0,0,-11.8516 0,0,1 0,1,0 0
MODULE SolarArrayRect -16.285,0,-7.276 -1,0,0 0,0,-1 0
MODULE Radiator_High-Temp_64 -23.885,0,-7.276 -1,0,0 0,0,-1 0
DELETEPOINT 2
ATTPOINT IM 0,2.2,-7.276 0,1,0 1,0,0
ATTPOINT IM 0,-2.2,-7.276 0,-1,0 1,0,0
ATTPOINT IM 0,0,-14.2272 0,0,-1 1,0,0
DELETEPORT 1
CONSTRUCTIONPORT 0,2.2,-7.276 0,1,0 1,0,0
CONSTRUCTIONPORT 0,-2.2,-7.276 0,-1,0 1,0,0
DOCKPORT 4.1,0,-7.276 1,0,0 0,0,-1
CONSTRUCTIONPORT 0,0,-14.2272 0,0,-1 1,0,0
EMPTYMASS 22150.000000
MASSCENTER 0.000000 0.000000 0.000000
PMI 14.490000 51.390000 45.070000
ANIM 3 SolarArrayRect 1 1
ANIM 5 SolarArrayRect 0 0
ANIM 6 Radiator_High-Temp_64 1 1
CONSUMABLES 700 699.999 0 3000 3000 0 500 499.999 0
TEMPERATURES -1:315.45:369.95 3:330.88:330.00 4:281.69:369.95 5:315.69:330.00
RADIATOR 6 296.496 0 0 -1 -1 4
HEATING no
THGROUPLEVELS 0 0 0 0
CREW 2 0
ENERGY 395188646.511516
SOLARARRAY 3 1 0 0.576053 0.576053 0.834043 0.834043
SOLARARRAY 5 0 1 0.000000 0.000000 0.000000 0.000000
MFC 0 0 0 -1 -1 -1 -1
MFC 1 0 5 -1 -1 -1 -1
MFC 0 0 0 -1 -1 -1 -1
MFC 0 1 7 0 0 0 -1
MFC 0 0 0 -1 -1 -1 -1
MFC 0 0 0 -1 -1 -1 -1
MFC 0 0 0 -1 -1 -1 -1
MFC 0 0 0 -1 -1 -1 -1
MFC 0 0 0 -1 -1 -1 -1
MFC 0 0 0 -1 -1 -1 -1
MFC 0 0 0 -1 -1 -1 -1
MFC 0 0 0 -1 -1 -1 -1
MFC 0 0 0 -1 -1 -1 -1
MFC 0 1 6 0 0 10 -1
END
Antares-SR:vessels\antaresSR
UMMUCREW Com-Commander-41-65-74
UMMUCREW Com-Pilot-27-67-55
UMMUCREW Com-MS1-15-70-45
STATUS Orbiting Earth
RPOS -3694957.30 5674645.79 167570.14
RVEL 5884.369 3933.425 -2966.994
AROT 88.76 -58.80 42.94
RCSMODE 0
AFCMODE 7
PRPLEVEL 0:0.508359
DOCKINFO 0:0,TrinStation3
NAVFREQ 0 0
EXTPWRSRC_MODE 0
CONFIGURATION 0
ASTRONAUT_INT 1
COM 0
PIL 0
MS1 0
MS2 0
MS3 0
MS4 0
COM_ABOARD 1
PIL_ABOARD 1
MS1_ABOARD 1
MS2_ABOARD 0
MS3_ABOARD 0
MS4_ABOARD 0
INTERNAL_POWER 1
O2TIME_VAR 0.0000
OXY_VAR 0.0000
O2RTIME 1117501.3312
FUELRTIMER 0.0000
KR 0
HL 0
PG 0
RG 0
ONP 0
ONM 0
ONMVC 1 1.0000
PRESSBUTSTATE 0
DOCKINGHATCH 1 1.0000
antenna 1 1.0000
SR_spa1 1 1.0000
SR_spa2 1 1.0000
SR_spa3 1 1.0000
SR_spa4 1 1.0000
SR_spa5 1 1.0000
SR_spa6 1 1.0000
SR_spb1 1 1.0000
SR_spb2 1 1.0000
SR_spb3 1 1.0000
SR_spb4 1 1.0000
SR_spb5 1 1.0000
SR_spb6 1 1.0000
END
END_SHIPS
Interceptor
Well-known member
Hey fred18,if I save the scenario after moving it,will the pad still be at 180 degrees?when I start the new saved scenario?Thanks
I'm really sorry to ask the obvious but...
Did you press P to start the autopilot?
To have the autopilot automatically running at the scenario opening there must be the line AP 1 in the scenario file and I don't see it, so you need to press P to start the countdown
---------- Post added at 20:03 ---------- Previous post was at 20:00 ----------
Yes: the option "launch_site" allows to create ramps easily without boring times creating every single item but once used the scenario is saved and created in the usual way, and in the next run. you'll find everything as saved!
Did you press P to start the autopilot?
To have the autopilot automatically running at the scenario opening there must be the line AP 1 in the scenario file and I don't see it, so you need to press P to start the countdown
---------- Post added at 20:03 ---------- Previous post was at 20:00 ----------
Yes: the option "launch_site" allows to create ramps easily without boring times creating every single item but once used the scenario is saved and created in the usual way, and in the next run. you'll find everything as saved!
Napalm42
Drell Admiral, Citadel Fleet
That I did. I did RTFM before starting, but it's just this weird little hitch that's been happening a bit. I'll try using AP 1 and see if it helps.
Last edited:
Hmm sorry to ask but what is RTFM?
And another question that comes to my mind: how do you close orbiter? Did you perform a launch, then close the scenario and immediatly re run a pre-launch scenario? Because if you simply quit a scenario and reopen a pre-launch scenario it may not work due to the public variable of the autopilot state. You need to close orbiter completely and re open it.
And another question that comes to my mind: how do you close orbiter? Did you perform a launch, then close the scenario and immediatly re run a pre-launch scenario? Because if you simply quit a scenario and reopen a pre-launch scenario it may not work due to the public variable of the autopilot state. You need to close orbiter completely and re open it.
Read The F Manual.
Napalm42
Drell Admiral, Citadel Fleet
Yeah, what Dave said. I tend to make really dumb mistakes when I code scenarios since I'm not quite used to it yet.
In this case, I just managed to fly the flight, AP 1 did work. I also tested starting a flight, then exiting and restarting without closing orbiter, and the same problem was exhibited. Upon closing it and doing this again, the manual autopilot engaged without an issue. Thanks for the help fred, It seems just for now on I'll add AP 1 to my scenarios using the DLL Jarvis.
Pipcard
mikusingularity
When you were making the Delphinus lifting body, did you use any computational fluid dynamics software?
edit: never mind, it's similar aerodynamics parameters to liber's Dream Chaser add-on, which are actually taken from a spacecraft3 tutorial example.
edit: never mind, it's similar aerodynamics parameters to liber's Dream Chaser add-on, which are actually taken from a spacecraft3 tutorial example.
Last edited:
Similar threads
- Locked
- Sticky
