OrbitHangar
Addon Comments
- Joined
- Apr 9, 2008
- Messages
- 3,832
- Reaction score
- 18
- Points
- 0
OHM STS-88 update
- Thread starter OrbitHangar
- Start date
The Aviator
Active member
Same problem here, missing meshes. CTD on all scenarios where Discovery is the selected ship. If I modify the scenario selecting another vessel at start-up it works, but if I select Discovery, crashes to desktop.
Donamy
Addon Developer
Should be fixed now. Sorry about that.
Are you sure you're using SSU 1.25 ?
The Aviator
Active member
Yes, I'm using SSU 1.25. Haven't checked the fixed one yet, I'll give it a go when I'll return home. :thumbup:
The Aviator
Active member
Update done. Now it's working for me, at least the on orbit scenarios. 
I've had problems on the launch scenario because I've had to reconfigure all APU switches before takeoff, otherwise an APU malfunction will occur just before launch. Could I suggest to modify this scenario starting time at T -10 minutes? Doing so, we could see launch complex animations (crew access arm, fuel cap) and have time to configure the spacecraft appropriately. It's just in my opinion, just wanted to throw my 2 cents.
Thanks Don! :thumbup:
I've had problems on the launch scenario because I've had to reconfigure all APU switches before takeoff, otherwise an APU malfunction will occur just before launch. Could I suggest to modify this scenario starting time at T -10 minutes? Doing so, we could see launch complex animations (crew access arm, fuel cap) and have time to configure the spacecraft appropriately. It's just in my opinion, just wanted to throw my 2 cents.
Thanks Don! :thumbup:
Nothing in the log.
Donamy
Addon Developer
Update done. Now it's working for me, at least the on orbit scenarios.
I've had problems on the launch scenario because I've had to reconfigure all APU switches before takeoff, otherwise an APU malfunction will occur just before launch. Could I suggest to modify this scenario starting time at T -10 minutes? Doing so, we could see launch complex animations (crew access arm, fuel cap) and have time to configure the spacecraft appropriately. It's just in my opinion, just wanted to throw my 2 cents.
Thanks Don! :thumbup:
I'm glad it's working, but I was afraid people didn't want to wait a full 10 min before launch. I may add a scenario for it T-10 min launch.
---------- Post added at 04:21 AM ---------- Previous post was at 04:20 AM ----------
Anything about Spacecraft3.dll module in there ?
No. Seems to be a problem with SSU. Haven't pinned down the exact problem yet.
---------- Post added at 10:17 AM ---------- Previous post was at 08:31 AM ----------
Did some troubleshooting and managed to fix the CTD by moving the Zarya vessel entry to after the SSU vessel entry in the scenario.
---------- Post added at 12:27 PM ---------- Previous post was at 10:17 AM ----------
I think I have discovered another bug. Seems like something's off either on Zarya or PMA1 as Zarya ends up rotated 180°s when you release the SRMS EE.
Fixed the problem. This revised Unitybay.ini file fixes the problem nicely:
Code:
[CONFIG]
MESHNAME="UnityBay"
EMPTY_MASS=1814
FUEL_MASS=0
MAIN_THRUST=0
ATTITUDE_THRUST=0
ISP=0
PMI=(1,1,1)
CROSS_SECTION=(3.0,2.9,2.9)
SIZE=50
[DOCK_0] ;shuttle STS-88
POS=(0,0.68,6.21)
DIR=(0,0,1)
ROT=(0,1,0)
[DOCK_1] ; to Zarya
POS=(-0.03,0.698,-3.9)
DIR=(0,0,-1)
ROT=(0,1,0)
[PARENT_ATTACH_0] ;to PMA2 and Destiny
NAME="PMA2"
POS=(0.00,-0.040,3.856)
DIR=(0,0,1)
ROT=(0,1,0)
LOOSE=0
ID="XS"
[PARENT_ATTACH_1] ;to Zarya
NAME="Zarya"
POS=(-0.03,0.698,-3.58)
DIR=(0,-1,0)
ROT=(0,0,1)
LOOSE=0
ID="XS"
[PARENT_ATTACH_2] ; Node3
NAME="Node3"
POS=(-2.27,-0.04,1.78)
DIR=(1,0,0)
ROT=(0,1,0)
LOOSE=0
ID="XS"
[PARENT_ATTACH_3] ; Z1
NAME="Z1"
POS=(-0.01,1.92,1.78)
DIR=(0,1,0)
ROT=(0,0,1)
LOOSE=0
ID="XS"
[PARENT_ATTACH_4] ;WIF1
NAME="WIF1"
POS=(0.81,0.916,-3.331)
DIR=(-0.966162,-0.257437,-0.0160487)
ROT=(0.258823,-0.965924,-0.000609853)
LOOSE=0
ID="XS"
[CHILD_ATTACH_0] ;to bay
NAME="bay"
POS=(-1.95,-1.95,2.0)
DIR=(-0.707107,-0.707107,0)
ROT=(0,0,1)
LOOSE=0
ID="XS"
[CHILD_ATTACH_1] ;grapple #1
NAME="grapple #1"
POS=(-1.301,1.046,4.738)
DIR=(-0.829423,0.558621,0.000481386)
ROT=(-0.559942,-0.82846,-0.0109106)
ID="GS"
[CHILD_ATTACH_2] ;grapple #2
NAME="grapple #2"
POS=(1.05,1.477,4.833)
DIR=(0.628552,0.683589,-0.370983)
ROT=(-0.735205,0.677844,-0.000932917)
ID="GS"
;-----------------------------------
; Animations
; CBM petals
[ROBOTIC_ARM]
JOINT_0_NAME="PORT"
JOINT_0_SEQ=0
JOINT_0_RANGE=(0,180)
JOINT_1_NAME="ZENITH"
JOINT_1_SEQ=1
JOINT_1_RANGE=(0,180)
JOINT_2_NAME="NADIR"
JOINT_2_SEQ=2
JOINT_2_RANGE=(0,180)
JOINT_3_NAME="STBD"
JOINT_3_SEQ=3
JOINT_3_RANGE=(0,180)
;----------------------------------------
; Petal Animation
;----------------------------------------
; Port petals
[ANIM_SEQ_0] ;PORT CBM petals
INIT_POS=0
DURATION=10
PAUSE=1
[ANIM_COMP_0] ; Port petal 1
SEQ=0
GROUPS=3
RANGE=(0,1)
ROT_PNT=(-2.13,0.67,2.50)
ROT_AXIS=(-0.100407,-0.703532,0.703535)
ANGLE=-180.
[ANIM_COMP_1] ; Port petal 2
SEQ=0
GROUPS=2
RANGE=(0,1)
ROT_PNT=(-2.13,0.67,1.07)
ROT_AXIS=(-0.100407,-0.703533,-0.703534)
ANGLE=180.
[ANIM_COMP_2] ; Port petal 3
SEQ=0
GROUPS=1
RANGE=(0,1)
ROT_PNT=(-2.13,-0.75,2.50)
ROT_AXIS=(-0.100407,0.703532,0.703535)
ANGLE=180.
[ANIM_COMP_3] ; Port petal 4
SEQ=0
GROUPS=0
RANGE=(0,1)
ROT_PNT=(-2.13,-0.75,1.07)
ROT_AXIS=(-0.100407,0.703533,-0.703534)
ANGLE=-180.
[ANIM_COMP_4] ; Port cover scale
SEQ=0
GROUPS=4
RANGE=(0.9,1)
TYPE=SCALE
SCALE=(0.0001,0.0001,0.0001)
REF=(-2.12,-0.04,1.78)
;---------------------------------------
; Zenith petals
[ANIM_SEQ_1] ;ZENITH CBM petals
INIT_POS=0
DURATION=10
PAUSE=1
[ANIM_COMP_5] ; ZENITH petal 1
SEQ=1
GROUPS=5
RANGE=(0,1)
ROT_PNT=(-0.72,2.08,1.07)
ROT_AXIS=(-0.703533,-0.100407,0.703534)
ANGLE=180.
[ANIM_COMP_6] ; ZENITH petal 2
SEQ=1
GROUPS=6
RANGE=(0,1)
ROT_PNT=(-0.72,2.08,2.50)
ROT_AXIS=(-0.703532,-0.100407,-0.703535)
ANGLE=-180.
[ANIM_COMP_7] ; ZENITH petal 3
SEQ=1
GROUPS=7
RANGE=(0,1)
ROT_PNT=(0.70,2.08,1.07)
ROT_AXIS=(0.703533,-0.100407,0.703534)
ANGLE=-180.
[ANIM_COMP_8] ; ZENITH petal 4
SEQ=1
GROUPS=8
RANGE=(0,1)
ROT_PNT=(0.70,2.08,2.50)
ROT_AXIS=(0.703532,-0.100407,-0.703535)
ANGLE=180.
[ANIM_COMP_9] ;Zenith cover scale
SEQ=1
GROUPS=9
RANGE=(0.9,1)
TYPE=SCALE
SCALE=(0.0001,0.0001,0.0001)
REF=(-0.01,2.07,1.78)
;--------------------------------------
; Nadir petals
[ANIM_SEQ_2] ;NADIR CBM petals
INIT_POS=0
DURATION=10
PAUSE=1
[ANIM_COMP_10] ; NADIR petal 1
SEQ=2
GROUPS=10
RANGE=(0,1)
ROT_PNT=(0.70,-2.16,1.07)
ROT_AXIS=(0.703533,0.100407,0.703534)
ANGLE=180.
[ANIM_COMP_11] ; NADIR petal 2
SEQ=2
GROUPS=11
RANGE=(0,1)
ROT_PNT=(0.72,-2.16,2.50)
ROT_AXIS=(0.703532,0.100407,-0.703535)
ANGLE=-180.
[ANIM_COMP_12] ; NADIR petal 3
SEQ=2
GROUPS=12
RANGE=(0,1)
ROT_PNT=(-0.72,-2.16,1.07)
ROT_AXIS=(-0.703533,0.100407,0.703534)
ANGLE=-180.
[ANIM_COMP_13] ; NADIR petal 4
SEQ=2
GROUPS=13
RANGE=(0,1)
ROT_PNT=(-0.72,-2.16,2.50)
ROT_AXIS=(-0.703532,0.100407,-0.703535)
ANGLE=180.
[ANIM_COMP_14] ;NADIR cover scale
SEQ=2
GROUPS=14
RANGE=(0.9,1)
TYPE=SCALE
SCALE=(0.0001,0.0001,0.0001)
REF=(-0.01,-2.15,1.78)
;--------------------------------------
; STBD petals
[ANIM_SEQ_3] ;STBD CBM petals
INIT_POS=0
DURATION=10
PAUSE=1
[ANIM_COMP_15] ; STBD petal 1
SEQ=3
GROUPS=15
RANGE=(0,1)
ROT_PNT=(2.11,0.67,1.07)
ROT_AXIS=(0.100407,-0.703533,-0.703534)
ANGLE=-180.
[ANIM_COMP_16] ; STBD petal 2
SEQ=3
GROUPS=16
RANGE=(0,1)
ROT_PNT=(2.11,0.67,2.50)
ROT_AXIS=(0.100407,-0.703532,0.703535)
ANGLE=180.
[ANIM_COMP_17] ; STBD petal 3
SEQ=3
GROUPS=17
RANGE=(0,1)
ROT_PNT=(2.11,-0.75,1.07)
ROT_AXIS=(0.100407,0.703533,-0.703534)
ANGLE=180.
[ANIM_COMP_18] ; STBD petal 4
SEQ=3
GROUPS=18
RANGE=(0,1)
ROT_PNT=(2.11,-0.75,2.50)
ROT_AXIS=(0.100407,0.703532,0.703535)
ANGLE=-180.
[ANIM_COMP_19] ;STBD cover scale
SEQ=3
GROUPS=19
RANGE=(0.9,1)
TYPE=SCALE
SCALE=(0.0001,0.0001,0.0001)
REF=(-2.10,-0.04,1.78)Similar threads
