Update International Space Station v.3.0

Yoda · Dec 12, 2009

So here's a question; when I'm doing a EVA from the shuttle and get my feet close to the Foot restraint on the side of the cargo bay, how do I actually attach to the foot restraint (is there a button I need to press) so I can use the arm to lift me ( attached to the foot restraint) out of the cargo bay ?

So, how do I attach my feet to the foot restraint ?

Thanks again.

Donamy · Dec 12, 2009

Thorton,

Great job on the FGB, but are you aware it is alittle long ? The real FGB(Zarya) is about 12.5 meters, your's is about 15.4 meters. Is this something you would fix, or not?

Thorton · Dec 12, 2009

Yoda said:
So here's a question; when I'm doing a EVA from the shuttle and get my feet close to the Foot restraint on the side of the cargo bay, how do I actually attach to the foot restraint (is there a button I need to press) so I can use the arm to lift me ( attached to the foot restraint) out of the cargo bay ?

So, how do I attach my feet to the foot restraint ?

Thanks again.

You need to grab APFR with EMU's hand, move it to RMS effector, attach it to RMS then move EMU to close to APFR and switch focus to APFR and attach EMU.

---------- Post added at 16:39 ---------- Previous post was at 16:34 ----------

Donamy said:
Thorton,

Great job on the FGB, but are you aware it is alittle long ? The real FGB(Zarya) is about 12.5 meters, your's is about 15.4 meters. Is this something you would fix, or not?

Seems i used bad drawings. :-(
And of course i will fix this. Thanks for nottice.

garyw · Dec 12, 2009

Hi Thorton,

I'm having a problem regarding the activation of the P6 Truss module.

It's attached to the station but for some reason the solar panel will not deploy. I've pressed ctrl+space to see if it would activate, nothing. I also went to the solar panel menu and selected the P6 to see if I can open it manually but also got nothing.

Am I missing something?

Thanks!

Thorton · Dec 12, 2009

P6 does not require activation, you can control it via solar panel&radiator manager right after attaching.
It looks like you miss something, could you post here step by step all key combination that you press?
Also, after attaching and selecting P6 in solar panel menu, check data screen #2. If P6 were connected to iss properly, line "P6" should show "0.00 kW" of energy generated by port and starboard panels instead of "--" placeholder.

Donamy · Dec 12, 2009

Thorton said:
Seems i used bad drawings. :-(
And of course i will fix this. Thanks for nottice.

Let me know if you need any.

Matte · Dec 13, 2009

my God, Thorton and Crew!
this add-on is awsome!! i'm loving it!

little question: i know the launch countdown for space shuttle is set for an hystorical time launch, but if i want to use your modified shuttle with the station i am building i should disable it...is it possible?...

thanks
Matte

jimini24 · Dec 13, 2009

Yes, I have exactly the same question
I try to optimize my LAN, and I would like to know if it's possible to disable
automatic countdown, or change the launch time with shuttle fleet.
I can't find a value in .scn file, I try to change the MET in the GPCMFD
but it update only the MET time with no consequences for the launch time.

The smoke effect at launch are great

Thorton · Dec 13, 2009

You could add line
TIMER -1 -1 -1
in Shuttlebay vessel and line
TIMER -1 -1 -1 -1 -1 -1 -1
in LC39, but you will loose all launch effects and sequinces.

garyw · Dec 13, 2009

Thorton,

Still having issues with the P6 deployment. I've listed the steps taken:

1. Took the P6 out of beth
2. moved the truss to the position where it needs to attach
3. unattached the shuttle RMS from the truss
4. went to Attachment menu of ISS
5. Selected correct attachment point
6. Pressed Q to attach truss to station 7. Pressed Ctrl Space to activate
8. saw that truss didnt deploy - went to solar panel menu
9. Selected P6
10. Press A. Nothing Happens
11. Tried going to port or starboard panel of truss and press A. Nothing

Thanks

Thorton · Dec 13, 2009

Hmm, did you attach P6 to Z1 zenith? Are you sure P6 attached after you pres "Q"?
What did you see in data screen #2 after you open solar panel menu?

jimini24 · Dec 13, 2009

Thorton said:
You could add line
TIMER -1 -1 -1
in Shuttlebay vessel and line
TIMER -1 -1 -1 -1 -1 -1 -1
in LC39, but you will loose all launch effects and sequinces.

Thanks!
It's funny, I launch through the LC39

I understand now, it's always the same timing in all shuttle scn, so
it's implemented in the dll, I guess, you can't change it in scn files

The best way finally, is to change my MJD a little bit, so
I can test perfect launch with no need of align plane later

your work is fantastic, great ISS :cheers:

andrew · Dec 13, 2009

Thorton, will You planned update Mir station addon for new Souyz and Proton?

garyw · Dec 13, 2009

Thorton said:
Hmm, did you attach P6 to Z1 zenith? Are you sure P6 attached after you pres "Q"?
What did you see in data screen #2 after you open solar panel menu?

The P6 is attached to the attachment "Z1 P6". it is attached properly.
2nd data page shows that P6 is drawing 0.0kw.

Thorton · Dec 13, 2009

I dont know, maybe i will update scenarios only.
Proton manual has "Work with payload" section, so you could modify scenarios by yourself.

---------- Post added at 01:31 ---------- Previous post was at 01:24 ----------

garyw said:
The P6 is attached to the attachment "Z1 P6". it is attached properly.
2nd data page shows that P6 is drawing 0.0kw.

Ok, its good news

if it shows 0 kW then communication between P6 and ISS were established.
Are 100% sure that nothing happends when you selected P6 in solar panel manager and press "A"?
The reason i ask, because full deployment of solar panels takes about 20 minutes, so its very slow.

Please, send me your problem scenario.

garyw · Dec 13, 2009

Thanks Thorton - here you go

Code:

BEGIN_DESC
Orbiter saved state at T = 5451
END_DESC

BEGIN_ENVIRONMENT
  System SolM
  Date MJD 51881.5645861007
END_ENVIRONMENT

BEGIN_FOCUS
  Ship EMU1
END_FOCUS

BEGIN_CAMERA
  TARGET EMU1
  MODE Cockpit
  FOV 30.00
END_CAMERA

BEGIN_HUD
  TYPE Orbit
  REF AUTO
END_HUD

BEGIN_MFD Left
  TYPE User
  MODE Attitude
END_MFD

BEGIN_MFD Right
  TYPE Docking
  NAV 0
END_MFD


BEGIN_SHIPS
ISS:ISSR\ISS
  STATUS Orbiting Earth
  RPOS 6625608.30 -608183.66 1175729.06
  RVEL -852.045 3648.904 6704.247
  AROT -37.29 -79.65 155.12
  PRPLEVEL 0:0.774 1:0.566 2:0.513 3:0.613 4:0.043
  DOCKINFO 1:0,SoyuzTM-31 5:0,STS-97
  NAVFREQ 0 0
  XPDR 159
  CONFIGURATION 3
  CAM 5
  FUEL 1782.9831 2950.0000 205.0138 367.5474 76.5480
  PMA 
  Z1 1
  CMG 1 3
  SSRMS 0
  TS1 0 0 0 0
  TS2 1 1 1 -1
  TS3 0.0000 0.0000 1.0000 1.0000
  ZARYA_SOL1 0 0 0 0
  ZARYA_SOL2 -1 -1 0 0
  ZARYA_SOL3 1.0000 1.0000 0.9207 0.9207
  ControlMode01 1 1
  ZVEZDA_SOL1 0 0
  ZVEZDA_SOL2 -1 -1 0 0
  ZVEZDA_SOL3 1.0000 1.0000 0.9207 0.9207
  ControlMode02 1 1
  Ku 0 1.0000 -1
  CAP 0 1.0000 -1
  JAL 0 0
  EMU 0 0
  ORLAN 0 0
  AL1 0 0.0000 1
  AL2 0 0.0000 1 0 0.0000 1
END
PMA-3:ISSR\PMA
  STATUS Orbiting Earth
  RPOS 6625614.38 -608182.48 1175733.45
  RVEL -852.045 3648.904 6704.247
  AROT 28.18 4.34 99.41
  ATTACHED 3:3,ISS
END
OTD:ISSR\OTD
  STATUS Orbiting Earth
  RPOS 6625609.70 -608183.24 1175727.83
  RVEL -852.045 3648.904 6704.247
  AROT 163.13 -9.71 86.41
  ATTACHED 1:0,ISS
  NAVFREQ 0 0
  SH1 1 0.8233 0
  SH2 1 0.7953 0
  SH3 1 0.3513 0
  SH4 1 0.3613 0
  SH5 0.5000
  POS -0.21 -2.18 0.16
  DIR -0.09 -0.94 -0.32
  ROT 0.20 0.29 -0.93
END
Strela:ISSR\Strela
  STATUS Orbiting Earth
  RPOS 6625609.29 -608185.84 1175728.70
  RVEL -852.045 3648.904 6704.247
  AROT 72.52 -3.54 9.73
  ATTACHED 1:1,ISS
  NAVFREQ 0 0
  SH1 0 0.5000 0
  SH2 1 0.1241 0
  SH3 0 0.0000 0
  SH4 1 0.1882 0 0 0.0000 0
  SH5 0.5000 0.5000
  POS0 -2.46 0.00 0.61
  DIR0 0.24 0.00 -0.97
  ROT0 0.00 1.00 0.00
  POS1 0.56 0.00 0.95
  DIR1 0.00 0.00 1.00
  ROT1 0.00 1.00 0.00
END
SoyuzTM-31:ISSR\SouyzTMA
  STATUS Orbiting Earth
  RPOS 6625575.83 -608180.07 1175724.34
  RVEL -852.045 3648.904 6704.247
  AROT -37.29 -79.65 110.12
  PRPLEVEL 0:0.485
  DOCKINFO 0:1,ISS
  NAVFREQ 0 0
  CAM 0 1.0000 -1
  SOL_DEP 0 1.0000 -1
  ENG_COV 0 0.0000 1 0 1
  VKA 0 0.0000 1
  PROBE 0 0.0000 1 0.0000
  LIGHT 1 0
  BATTERY 42000.0000 100.0000
  SHOWDATA 1
  DEPLOY 0.0000
  TRACK 0
  INIT 1
  TARGET 
  CURDOCK 0
  CMST 0
  DETACH 0
  DEPRESS 0 0.0000
  IMP 3
END
ProgressM1-4:ISSR\Progress_M1
  STATUS Orbiting Earth
  RPOS 6575833.09 -1488441.04 398351.70
  RVEL 356.540 3404.794 6877.985
  AROT 3.18 67.86 -83.42
  PRPLEVEL 0:0.570
  NAVFREQ 0 0
  CAM 0 1.0000 -1
  SOL_DEP 0 1.0000 -1
  ENG_COV 0 0.0000 1 0 0
  VKA 0 0.0000 1
  PROBE 0 0.0000 1 0.0000
  LIGHT 1 1
  BATTERY 39290.8714 93.5497
  SHOWDATA 1
  DEPLOY 0.0000
  TRACK 1
  INIT 1
  TARGET 
  CURDOCK 0
  IMP 3
END
STS-97:Shuttle
  STATUS Orbiting Earth
  RPOS 6625624.39 -608181.92 1175738.12
  RVEL -852.045 3648.904 6704.247
  AROT 142.71 79.65 24.88
  RCSMODE 2
  PRPLEVEL 0:0.458
  DOCKINFO 0:5,ISS
  NAVFREQ 0 0
  CONFIGURATION 3
  OV- 105
  RENDER 
  RMSARM 
  ISSV1 
  CARGODOOR 1 1.0000
  KUBAND 1 1.0000
  POSTLAND 0 0.0000
  SSMES 1 1.0000
  ADTA 0 0.0000
  PETD 0 0.0000
  SETD 1 1.0000
  ARMTILT 1 1.0000 1 1.0000
  PRADIATOR 1 1.0000
  SRADIATOR 0 0.0000
  GEAR 0 0.0000
  PAYLOAD_MASS1 3.0000
  PAYLOAD_MASS2 0.0000
  PAYLOAD_MASS3 0.0000
  ARM_STATUS 0.6797 0.7586 0.3911 0.3771 0.7978 0.7177
  PL1_OFS 0.000 0.000 0.000
  PL1_DIR 0.000 1.000 0.000
  PL1_ROT 0.000 0.000 1.000
  PL2_OFS 0.000 0.000 0.000
  PL2_DIR 0.000 1.000 0.000
  PL2_ROT 1.000 0.000 0.000
  PL3_OFS -1.850 1.800 11.750
  PL3_DIR 0.000 1.000 0.000
  PL3_ROT 0.000 0.000 1.000
  PL4_OFS -2.200 1.800 -6.250
  PL4_DIR 0.000 1.000 0.000
  PL4_ROT 0.000 0.000 1.000
  PL5_OFS 2.200 1.800 -6.250
  PL5_DIR 0.000 1.000 0.000
  PL5_ROT 0.000 0.000 1.000
  PL6_OFS 1.850 1.800 11.750
  PL6_DIR 0.000 1.000 0.000
  PL6_ROT 0.000 0.000 1.000
  OMS 
  CALLOUT 
  ASSIST  134.000
END
ShuttleBay:ISSR\STSBAY
  STATUS Orbiting Earth
  RPOS 6625624.39 -608181.92 1175738.12
  RVEL -852.045 3648.904 6704.247
  AROT 142.71 79.65 24.88
  ATTACHED 0:0,STS-97
  NAVFREQ 0 0
  STS 97
  EMU 1 1
  TIMER -0.0140 -0.0010
END
P6:ISSR\P6
  STATUS Orbiting Earth
  RPOS 6625614.89 -608189.47 1175719.36
  RVEL -852.045 3648.904 6704.247
  AROT 28.18 4.34 -170.59
  ATTACHED 3:6,ISS
  ControlMode 0 0
  RADIATORS 0 0 1 1 0.0000 0.0000
  SOL_DEPLOY1 0 0 1 1 0.0000 0.0000
  SOL_DEPLOY2 0 0 1 1 0.0000 0.0000
  BATTERY 0.0000 0.0000
  ROTATION 0.0000 0 0.0000 0
END
LC39:ISSR\LC39
  STATUS Landed Earth
  POS -80.6208780 28.6271250
  HEADING 0.00
  PRPLEVEL 0:1.000
  THLEVEL 0:1.000
  NAVFREQ 0 0
  RSS 0 1.0000 -1
  WR 0 1.0000 -1
  VA 0 1.0000 -1
  TC 0 1.0000 -1
  PS_LVL 0.0000 0.0000 0.0000
  TIMER 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000
  LIGHT 1
END
RL:ISSR\RL
  STATUS Landed Earth
  POS -80.7080430 28.6360000
  HEADING 180.00
  PRPLEVEL 0:1.000
END
EMU1:ISSR\EMU1
  STATUS Orbiting Earth
  RPOS 6625617.00 -608191.30 1175713.70
  RVEL -852.044 3648.904 6704.247
  AROT 35.08 38.76 -77.94
  RCSMODE 2
  PRPLEVEL 0:0.998
  NAVFREQ 0 0
  SH1 0 0.5000 0 0 0.8800 0
  SH2 0 0.0000 1
  SH3 1 0.4308 0 1 0.4090 0
  SH4 1 0.3618 0 1 0.4702 0
  SH5 1 0.1208 0 1 0.0918 0
  SH6 0 0.5000 0 1 0.4673 0
  SH7 0.5000 0 31006.5774 1
  POS_HAND 0.401 0.346 0.503
  DIR_HAND -0.907 -0.418 -0.046
  ROT_HAND -0.052 0.220 -0.974
  POS_CAM 0.000 1.000 0.000
  DIR_CAM 0.000 0.000 1.000
  ROT_CAM 1.000 0.000 0.000
END
EMU2:ISSR\EMU1
  STATUS Orbiting Earth
  RPOS 6625616.44 -608186.73 1175726.02
  RVEL -852.046 3648.905 6704.248
  AROT 142.71 79.65 24.88
  RCSMODE 2
  PRPLEVEL 0:0.999
  NAVFREQ 0 0
  SH1 0 0.5000 0 0 0.8800 0
  SH2 0 0.0000 1
  SH3 1 0.3478 0 1 0.3508 0
  SH4 0 0.5000 0 0 0.5000 0
  SH5 1 0.0113 0 1 0.0180 0
  SH6 0 0.5000 0 0 0.5000 0
  SH7 0.5000 1 31029.7874 2
  POS_HAND 0.404 0.441 0.521
  DIR_HAND -0.972 -0.234 -0.022
  ROT_HAND -0.000 0.093 -0.996
  POS_CAM 0.000 1.000 0.000
  DIR_CAM 0.000 0.000 1.000
  ROT_CAM 1.000 0.000 0.000
END
END_SHIPS

BEGIN_ExtMFD
END

Thorton · Dec 13, 2009

i just found glitch it this scenario. Seems its a bug of P6 power subsystem. I fix this in next version.

Quick solution - delete line BATTERY 0.0000 0.0000 from P6 vessel and you can continue your scenario.

Sorry

jgrillo2002 · Dec 13, 2009

Yep. had the same problem. and removed that line and now works. thanks for the help guys

Kyle · Dec 14, 2009

How do you attach the APFR to the SRMS? Thanks!

jimini24 · Dec 16, 2009

you can grapple it, with focus on sts, or you can add the line
"ATTACHED 0:1,STS-XX" in the APFR section (with XX the number of the mission)

------

the attachement point for the EMU on the APFR, don't move when I rotate APFR, so the EMU don't move.
there's also something strange with pitch (1-2 keys), there is only 2 positions (it is not rotate), and for the position 2, I have to hit the key 2 times at least.

I miss something here ?

-----

In STS-88, I can't find a good position to dock Unity on shuttle.
I can't put the module straight upside the docking port.
It's because, when you deploy RMS (with Ctrl-X), it's going to far
from the port (the left side) of the shuttle(for about 5-10°)

when the RMS is deployed, you should have 0° roll for the RMS, so when you increase shoulder pitch, the arm have to go up perfectly straight

I know it's coming from shuttle fleet, but do you think it's possible to fix it?

Update International Space Station v.3.0

Donator

Addon Developer

sense offender

O-F Administrator

sense offender

Addon Developer

Member

New member

sense offender

O-F Administrator

sense offender

New member

New member

O-F Administrator

sense offender

O-F Administrator

sense offender

Conservative Pioneer

Armchair Astronaut

New member

Similar threads