Request JEO Request

[gattispilot]

What is that image from

 

[emin2004]

What is that image from

i made this picture via cinema 4d render

 

[gattispilot]

Of what?

Can you do a side and front view also?

 

[emin2004]

Of what?

Can you do a side and front view also?

 

[gattispilot]

Thanks. Where did you get the model?

So a couple of interesting things. The concept drawing I had had no thruster on the rear just side. Also the propellant tanks seem to be the same?

 

[emin2004]

Thanks. Where did you get the model?

So a couple of interesting things. The concept drawing I had had no thruster on the rear just side. Also the propellant tanks seem to be the same?

imported using the orbiter .msh importer imported into blender and exported as dae and imported into c4d

---------- Post added at 09:36 PM ---------- Previous post was at 09:29 PM ----------

imported using the orbiter .msh importer imported into blender and exported as dae and imported into c4d

you can continue working on the JEO spacecraft

 

[gattispilot]

Which mesh though the one in your images is different than the add on.

 

[emin2004]

Which mesh though the one in your images is different than the add on.

that msh picture that i gave you was an addon uploaded on 14/12/08 about 9 years ago by istochnikov


your JEO is much better than istochnikov's JEO

---------- Post added at 09:46 PM ---------- Previous post was at 09:44 PM ----------

that msh picture that i gave you was an addon uploaded on 14/12/08 about 9 years ago by istochnikov


your JEO is much better than istochnikov's JEO

and put a download link to your JEO model

and what software your using for that?

 

[gattispilot]

You mean this? Thanks

But that is different than yours.

I use anim8or

 

[emin2004]

You mean this? Thanks

But that is different than yours.

I use anim8or

close up of JEO instruments

 

[gattispilot]

So the mesh you are showing is different than the original. See no shield on the sides?

But on mine I adjusted the heights,.... to make it the correct height 4.4M.

But the top is wrong
the left is the drawing and the right mine. Those squares aren't there.

So we get this right now:

based off this:
https://upload.wikimedia.org/wikipedia/commons/8/82/JEO-exploring.jpg

I need to add foil around the thruster.

Next are the Antenna. It looks there are 2. One long one and then the one with the 3 t.
What I don't understand is how the center t can go thru the box cover?

https://trs.jpl.nasa.gov/bitstream/handle/2014/45324/09-0123_A1b.pdf?sequence=1
https://trs.jpl.nasa.gov/bitstream/handle/2014/42227/10-0086.pdf?sequence=1&isAllowed=y

 

[emin2004]

So the mesh you are showing is different than the original. See no shield on the sides?

But on mine I adjusted the heights,.... to make it the correct height 4.4M.

But the top is wrong
the left is the drawing and the right mine. Those squares aren't there.

So we get this right now:

based off this:
https://upload.wikimedia.org/wikipedia/commons/8/82/JEO-exploring.jpg

I need to add foil around the thruster.

Next are the Antenna. It looks there are 2. One long one and then the one with the 3 t.
What I don't understand is how the center t can go thru the box cover?

https://trs.jpl.nasa.gov/bitstream/handle/2014/45324/09-0123_A1b.pdf?sequence=1
https://trs.jpl.nasa.gov/bitstream/handle/2014/42227/10-0086.pdf?sequence=1&isAllowed=y

this is what JEO's long antenna looks like

---------- Post added at 03:27 PM ---------- Previous post was at 03:07 PM ----------

this is what JEO's long antenna looks like

JEO's long antenna will be placed on top front

 

[gattispilot]

And then there are these:

I did see on pinterest and image with the boxes. So I may combine them.

https://www.pinterest.co.uk/pin/576320083555870925/?lp=true

 

[emin2004]

And then there are these:

I did see on pinterest and image with the boxes. So I may combine them.

https://www.pinterest.co.uk/pin/576320083555870925/?lp=true

that's a good idea

---------- Post added at 04:58 PM ---------- Previous post was at 04:13 PM ----------

that's a good idea

have you combined them?

 

[gattispilot]

So we get this:

I need to work on the dish and think the long antenna without the t is too short. Guess I had a spec on that?

 

[emin2004]

So we get this:

I need to work on the dish and think the long antenna without the t is too short. Guess I had a spec on that?

Make the antenna very long

 

[gattispilot]

Yes. I will. But other than it does it look ok?

 

[emin2004]

Yes. I will. But other than it does it look ok?

it looks ok but the antenna with the 3 t needs to be really long

picture of jeo

look at the bottom of jeo

---------- Post added at 03:27 PM ---------- Previous post was at 03:23 PM ----------

it looks ok but the antenna with the 3 t needs to be really long

picture of jeo

look at the bottom of jeo

and post a picture when you made it long

---------- Post added at 07:12 PM ---------- Previous post was at 03:27 PM ----------

we need you gattispilot

 

[gattispilot]

and this:

 

[emin2004]

and this:

can you give me the download link to this msh including texture?

---------- Post added at 10:33 PM ---------- Previous post was at 10:28 PM ----------

download link to this msh with texture?