STS-135 Space Shuttle Vessel(SSV) Mission

OHM STS-135 Space Shuttle Vessel(SSV) Mission V1

Geoair2

Well-known member
Joined
Dec 13, 2022
Messages
133
Reaction score
385
Points
78
Location
Ploemel
Geoair2 submitted a new addon:

STS-135 Space Shuttle Vessel(SSV) Mission - SSV Mission STS-135

The last Space Shuttle mission scenario for Space Shuttle Vessel by GLS.
requiers Space Shuttle Vessel 1.8 by GLS https://www.orbiter-forum.com/resources/space-shuttle-vessel.5563/
STS-131 by Donamy https://www.orbiter-forum.com/resources/sts-131-mission.4208/
The ISS by Donamy and Thorton's For Orbiter 2016. https://www.orbiter-forum.com/resources/donamy-and-thortons-iss-for-orbiter-2016.2816/
And highly recommend ShuttleFDOMFD by indy91...

Read more about this addon...
 
Hi
I tried the last Space Shuttle mission scenario. But picked up some issues with the latch 1 not matching the attachment in the scenario file.

Your help will really be appreciated thank you.
 

Attachments

  • Screenshot (46).png
    Screenshot (46).png
    114.8 KB · Views: 4
  • Screenshot (45).png
    Screenshot (45).png
    88.9 KB · Views: 4
  • Screenshot (44).png
    Screenshot (44).png
    116 KB · Views: 4
  • STS-135_Final.scn
    STS-135_Final.scn
    29.4 KB · Views: 2
  • Orbiter.log
    Orbiter.log
    26.3 KB · Views: 1
Hi
I tried the last Space Shuttle mission scenario. But picked up some issues with the latch 1 not matching the attachment in the scenario file.

Your help will really be appreciated thank you.
I can tell that the mission in the Mission Editor does not produce the posted scenario.
You should be able to attach the (base) payloads to SSV, and only have to indicate which attachment index to use in the payload vessel. There is no need to worry or edit attachment indexes on the SSV vessel. The only scenario parameters these vessels need are their own parameters, and nothing else.
"Secondary" vessels, that are attached to the "base payloads" above, things like the amonia tank attached to the ICC, have to be added in the Other Vessels tab, and the ATTACHED parameter needs to be added manually to that vessel, so something like "ATTACHED 0:0,ICC", along with all other default parameters.
 
Back
Top