Project Space Transportation System 2016

The payloads for STS-38 were two satellites, an SDS2 (USA-67) and an HS-376 (Prowler)....

Fortunately both satellites have Orbiter add-ons already, with SDS2 being included in the STS-28 package

The configuration for STS-38 should be identical with the image below:
View attachment 40746
Thanks. I will see about updating that to STS 38
 
Not to add too much to your list - but it would be great to look at STS-35.

Thanks for all your effort!
 
Thanks. I guess technically the payload should be
The PKM employed for SDS 2-2 was the Orbus 21S - a spin-stabilized version of the first stagemotor of the Inertial Upper Stage (IUS). For the IUS, the standard separation delta-V was about9.5 m/s, which put the shuttle about 80 km behind, and 30 km above the PKM at firing.Since Prowler was based on the HS-376 bus, it probably employed the PAM-D, as explained inSection 5.2. The standard separation delta-V was about 3.4 m/s, which put the shuttle about 20km behind, and 10 km above the PKM at firing.
Here is STS 35
 

Attachments

  • STS35VIEW2.jpg
    STS35VIEW2.jpg
    80.6 KB · Views: 15
The PKM employed for SDS 2-2 was the Orbus 21S - a spin-stabilized version of the first stagemotor of the Inertial Upper Stage (IUS).
It should be something like was seen on STS-49, but deployed "sideways" like the Leasats.
Intelsat-603-deploy.jpg
 
Yes STS-35 is already an addon, but it doesn't function or show up in the D3D.
 
It might be due to the fact that the payload things Astro,... are sc3/4
copy the config/spacecraft folder and place here:
D:\Orbiter2016\Modules\Server\Config\spacecraft
 
Looking through the scen files it looks like no one has made STS-62, STS-63, STS-69. Would be interesting...
 
Looking through the scen files it looks like no one has made STS-62, STS-63, STS-69. Would be interesting...
I think @gattispilot made STS-63 already, just not posted. STS-69 is WSF-2 & SPARTAN201, both payloads already made, need just put them together (need EVA also for historical re-make). Not sure about STS-62
 
On sts 38. I guess the scn needs the HS376a needs to be renamed Prowler and the APC to SBS2
 

Attachments

  • sts38payload1.jpg
    sts38payload1.jpg
    61.8 KB · Views: 9
  • sts38payload2.jpg
    sts38payload2.jpg
    50.4 KB · Views: 9
The name of the larger satellite is SDS2, not SBS2 (that was a name for a different, civilian commercial satellite)...

These SDS2 satellites were launched three times from a Shuttle (STS-28, STS-38 and STS-53) and once from a Titan IV and Atlas II
 
Thanks. So for STS38 I have them as:
PAMD2-SBS-4:SDS2
STATUS Orbiting Earth
RPOS 6574420.05 333453.41 -1399377.49
RVEL 795.305 -7406.795 1939.046
AROT 98.32 34.52 166.98
ATTACHED 0:0,STS-38
AFCMODE 7
PRPLEVEL 0:0.995608
NAVFREQ 0 0
RCS 1
CTRL_SURFACE 1
CONFIGURATION 1
CURRENT_PAYLOAD 0
END
SDS-2-PAM: PROWLER

do we have sts 53?
 
Back
Top