• ORBITER-FORUM will be temporarily closed at 2026-07-23 18:00 UTC while we complete some OF maintenance tasks. The amount of downtime is expected to take up to one hour, but probably less.

Idea Shuttle Fleet recompile for Orbiter 2016

Weird. So the sts 93 cfg calls for the:
Code: 
[PAYLOAD_1]
MeshName="2016spaceshuttle\Columbia\ColumbiaORG2016F"
off=(-0.00,8.13,0.0)
Diameter=23.1
Height=36.2
Mass=92578.0
Module="Columbia"
Name=STS-93
SPEED=(0,0.8,0)
Rot_Speed=(0.002,0,0)
RENDER=1
LIVE=1
from the scn:
Code: 
STS-93:Shuttle2016B
  STATUS Landed Earth
  POS -80.6041240 28.6086530
  HEADING 0.00
  ALT 1.588
  AROT 61.715 4.483 8.266
  ATTACHED 0:0,ET-93
  AFCMODE 7
  PRPLEVEL 0:1.000000
  NAVFREQ 0 0
  CONFIGURATION 3
  GEAR 0 0.0000
  HATCH 0 0.0000
  OV 102 
  MID
so add this to the scn and see if you get a difference
"ORIGINAL" somewhere in the sts93:shuttle2016B

---------- Post added 04-10-19 at 04:44 AM ---------- Previous post was 04-09-19 at 04:28 PM ----------

So what happens is in the scn the mesh is selected by OV,ORGINAL,or MID.
Code: 
if ((OV == 102) && (ORIGINAL == 0) && (MIDMODEL == 0))	hOrbiterMesh = oapiLoadMeshGlobal("2016SPACESHUTTLE\\Columbia\\ColumbiaLATE2016D");
	else if ((OV == 104) && (ORIGINAL == 0) && (MIDMODEL == 0))	hOrbiterMesh = oapiLoadMeshGlobal("2016SPACESHUTTLE\\Atlantis\\Atlantis2016F");
	else if ((OV == 99) && (ORIGINAL == 0))	hOrbiterMesh = oapiLoadMeshGlobal("2016SPACESHUTTLE\\Challenger\\Challengerlate2016G");
	else if ((OV == 99) && (ORIGINAL == 1))	hOrbiterMesh = oapiLoadMeshGlobal("2016SPACESHUTTLE\\Challenger\\ChallengerORG2016g");

	else if ((OV == 103) && (ORIGINAL == 0)&& (MIDMODEL==0))	hOrbiterMesh = oapiLoadMeshGlobal("2016SPACESHUTTLE\\Discovery\\DiscoveryLATE2016G");
	else if ((OV == 105) && (ORIGINAL == 0))hOrbiterMesh = oapiLoadMeshGlobal("2016SPACESHUTTLE\\Endeavour\\Endeavour2016D");
	else if (OV == 106)hOrbiterMesh = oapiLoadMeshGlobal("2016SPACESHUTTLE\\Constellation\\Constellation2016D");
	else if (OV == 109)hOrbiterMesh = oapiLoadMeshGlobal("2016SPACESHUTTLE\\Constellation\\ConstellationUSA2016D");
	else if (OV == 107)hOrbiterMesh = oapiLoadMeshGlobal("2016SPACESHUTTLE\\Intrepid\\Intrepid2016D");

	else if (OV == 108 )hOrbiterMesh = oapiLoadMeshGlobal("2016SPACESHUTTLE\\Constitution\\Constitution2016D");

	else if ((OV == 103) && (ORIGINAL == 1) && (MIDMODEL == 0))	hOrbiterMesh = oapiLoadMeshGlobal("2016SPACESHUTTLE\\Discovery\\DiscoveryORG2016G");
	else if ((OV == 105) && (ORIGINAL == 1))hOrbiterMesh = oapiLoadMeshGlobal("2016SPACESHUTTLE\\Endeavour\\EndeavourORG2016E");
	else if ((OV == 102) && (ORIGINAL == 1) && (MIDMODEL == 0))	hOrbiterMesh = oapiLoadMeshGlobal("2016SPACESHUTTLE\\Columbia\\ColumbiaORG2016F");
	else if ((OV == 104) && (ORIGINAL == 1))	hOrbiterMesh = oapiLoadMeshGlobal("2016SPACESHUTTLE\\Atlantis\\AtlantisORG2016F");
	else if ((OV == 103) && (MIDMODEL == 1) && (ORIGINAL == 0))	hOrbiterMesh = oapiLoadMeshGlobal("2016SPACESHUTTLE\\Discovery\\DiscoveryMID2016F");
	else if ((OV == 102) && (ORIGINAL == 1) && (MIDMODEL == 1))	hOrbiterMesh = oapiLoadMeshGlobal("2016SPACESHUTTLE\\Columbia\\Columbiamid2016a");
	else if ((OV == 102) && (ORIGINAL == 0) && (MIDMODEL == 1))	hOrbiterMesh = oapiLoadMeshGlobal("2016SPACESHUTTLE\\Columbia\\Columbiamid2016a");



	else hOrbiterMesh = oapiLoadMeshGlobal("2016SPACESHUTTLE\\Discovery\\DiscoveryORG2016f");

Thanks to Star Factor
More Orbiter models. So just need to assign an OV number.
STSATLANTISUSA
fjiSSOo.jpg

STSENDEAVOURUSA
IHS4yLh.jpg

STSTWA: OV 149
avWH4Ly.jpg

STSPATHFINDER OV 098
rgh3hdL.jpg

STSUSAF OV 121
fzgZ2kg.jpg


One other thing I noticed was in SF if you made an shuttle and placed it on the ground the gear auto came down. Do we need that?
 
Last edited:
Well here it is the right solution !



My Shuttle has restored its texture.



THANK YOU AGAIN "Gattispilot"

---------- Post added at 09:06 PM ---------- Previous post was at 08:46 PM ----------
gattispilot said:
.............
I found a mistake when running the sts 66
but I get this:
oUftzNf.jpg


So just 2 changes to a scn to make a non launch scn work. Go from shuttle to Shuttle 2016B and then on the OV just remove the hyphen so OV-104 to OV 104
Click to expand...

My friend "Gattispilot" I still need your knowledge.

With STS-66 addon
[ame="https://www.orbithangar.com/searchid.php?ID=6752"]STS-66 MISSION.[/ame]
I now have this problem.



Below the .log file

Code: 
**** Orbiter.log
000000.000: Build Aug 28 2016 [v.160828]
000000.000: Timer precision: 6.41633e-007 sec
000000.000: Found 0 joystick(s)
000000.000: Module AtlantisConfig.dll .... [Build 160828, API 160828]
000000.000: Module AtmConfig.dll ......... [Build 160828, API 160828]
000000.000: Module DGConfigurator.dll .... [Build 160828, API 160828]
000000.000: ---------------------------------------------------------------
BaseDir    : C:\ORBITER 2016\ORBITER 2016 THD\
ConfigDir  : C:\ORBITER 2016\ORBITER 2016 THD\Config\
MeshDir    : C:\ORBITER 2016\ORBITER 2016 THD\Meshes\
TextureDir : C:\ORBITER 2016\ORBITER 2016 THD\Textures\
HightexDir : C:\ORBITER 2016\ORBITER 2016 THD\Textures2\
ScenarioDir: C:\ORBITER 2016\ORBITER 2016 THD\Scenarios\
000000.000: ---------------------------------------------------------------
000000.000: Module D3D9Client.dll ........ [Build 190225, API 160828]
============================ ERROR: ===========================
Failed loading module Modules\Plugin\CamShake.dll (code 126)
[Orbiter::LoadModule | .\Orbiter.cpp | 600]
===============================================================
============================ ERROR: ===========================
Failed loading module Modules\Plugin\InterMFD56.dll (code 126)
[Orbiter::LoadModule | .\Orbiter.cpp | 600]
===============================================================
000000.000: Module LunarTransferMFD.dll .. [Build 160829, API 160815]
============================ ERROR: ===========================
Failed loading module Modules\Plugin\Map3DMFD.dll (code 126)
[Orbiter::LoadModule | .\Orbiter.cpp | 600]
===============================================================
============================ ERROR: ===========================
Failed loading module Modules\Plugin\ReFuelMFD.dll (code 126)
[Orbiter::LoadModule | .\Orbiter.cpp | 600]
===============================================================
000000.000: Module ScriptMFD.dll ......... [Build 160828, API 160828]
000000.000: Module Multistage2015_MFD.dll  [Build 170626, API 160828]
000000.000: Module InterMFD57.dll ........ [Build 161216, API 160910]
000000.000: ---------------------------------------------------------------
000000.000: >>> WARNING: Obsolete API function used: oapiRegisterMFDMode
000000.000: At least one active module is accessing an obsolete interface function.
000000.000: Addons which rely on obsolete functions may not be compatible with
000000.000: future versions of Orbiter.
000000.000: ---------------------------------------------------------------
000000.000: Module Meshdebug.dll ......... [Build 160828, API 160828]
000000.000: Module LuaMFD.dll ............ [Build 160828, API 160828]
000000.000: Module transx.dll ............ [Build 160216, API 160214]
000000.000: Module CustomMFD.dll ......... [Build 160828, API 160828]
000000.000: Module AttitudeMFD.dll ....... [Build ******, API 060425]
000000.000: Module HUDdataMFD.dll ........ [Build ******, API 060425]
000000.000: Module LuaConsole.dll ........ [Build 160828, API 160828]
000000.000: Module ExtMFD.dll ............ [Build 160828, API 160828]
============================ ERROR: ===========================
Failed loading module Modules\Plugin\DX9ExtMFD.dll (code 126)
[Orbiter::LoadModule | .\Orbiter.cpp | 600]
===============================================================
000000.000: Module FlightData.dll ........ [Build 160828, API 160828]
000000.000: Module Framerate.dll ......... [Build 160828, API 160828]
000000.000: Module Rcontrol.dll .......... [Build 160828, API 160828]
000000.000: Module ScnEditor.dll ......... [Build 160828, API 160828]
000000.000: Module XRSound.dll ........... [Build 180309, API 160828]
000000.000: Module OrbiterSound.dll ...... [Build 180310, API 160828]
000000.000: 
000000.000: **** Creating simulation session
000000.000: D3D9: [DirectX 9 Initialized]
            D3D9: 3D-Adapter.............. : NVIDIA GeForce GT 240M 
            D3D9: MaxTextureWidth......... : 8192
            D3D9: MaxTextureHeight........ : 8192
            D3D9: MaxTextureRepeat........ : 8192
            D3D9: VolTexAddressCaps....... : 0x3F
            D3D9: NumSimultaneousRTs...... : 4
            D3D9: VertexDeclCaps.......... : 0x30F
            D3D9: MiscCaps................ : 0x2FCEF2
            D3D9: XNA Math Support........ : Yes
            D3D9: Vertex Texture.......... : Yes
            D3D9: Shadow Mapping.......... : Yes
            D3D9: D3DFMT_A16B16G16R16F.... : Yes
            D3D9: D3DFMT_A32B32G32R32F.... : Yes
            D3D9: D3DFMT_D32F_LOCKABLE.... : Yes
            D3D9: D3DFMT_A2R10G10B10...... : Yes
            D3D9: D3DFMT_L8............... : Yes
            D3D9: D3DDTCAPS_DEC3N......... : No
            D3D9: D3DDTCAPS_FLOAT16_2..... : Yes
            D3D9: D3DDTCAPS_FLOAT16_4..... : Yes
            D3D9: Runs under WINE......... : No
            D3D9: Available Texture Memory : 3003 MB
000000.000: D3D9: [3DDevice Initialized]
000000.000: D3D9: [Loading Constellations]
000000.000: D3D9: [D3D9Client Initialized]
000000.000: Module Sun.dll ............... [Build 160828, API 160828]
VSOP87(E) Sun: Precision 1e-006, Terms 554/6634
000000.000: Module Mercury.dll ........... [Build 160828, API 160828]
VSOP87(B) Mercury: Precision 1e-005, Terms 167/7123
000000.000: Module Venus.dll ............. [Build 160828, API 160828]
000000.000: Module VenusAtm2006.dll ...... [Build 160828, API 160828]
VSOP87(B) Venus: Precision 1e-005, Terms 79/1710
000000.000: Module Earth.dll ............. [Build 160828, API 160828]
000000.000: Module EarthAtmJ71G.dll ...... [Build 160828, API 160828]
VSOP87(B) Earth: Precision 1e-008, Terms 2564/2564
============================ ERROR: ===========================
Parse error from base definition file for Cape Canaveral: Block: TEXn: expected 3 values (*char, scalar, scalar)
[BaseObject::ParseError | .\Baseobj.cpp | 184]
===============================================================
============================ ERROR: ===========================
Parse error from base definition file for Cape Canaveral: Block: TEXn: expected 3 values (*char, scalar, scalar)
[BaseObject::ParseError | .\Baseobj.cpp | 184]
===============================================================
000000.000: BaseObject: Parse error 2
000000.000: Module Moon.dll .............. [Build 160828, API 160828]
ELP82: Precision 1e-005, Terms 116/829
000000.000: Module Mars.dll .............. [Build 160828, API 160828]
000000.000: Module MarsAtm2006.dll ....... [Build 160828, API 160828]
VSOP87(B) Mars: Precision 1e-005, Terms 405/6400
000000.000: Module Phobos.dll ............ [Build ******, API 060425]
000000.000: Module Deimos.dll ............ [Build ******, API 060425]
000000.000: Module Galsat.dll ............ [Build 160828, API 160828]
000000.000: Module Jupiter.dll ........... [Build 160828, API 160828]
VSOP87(B) Jupiter: Precision 1e-006, Terms 1624/3625
000000.000: Module Io.dll ................ [Build 160828, API 160828]
000000.000: Module Europa.dll ............ [Build 160828, API 160828]
000000.000: Module Ganymede.dll .......... [Build 160828, API 160828]
000000.000: Module Callisto.dll .......... [Build 160828, API 160828]
000000.000: Module Satsat.dll ............ [Build 160828, API 160828]
000000.000: Module Saturn.dll ............ [Build 160828, API 160828]
VSOP87(B) Saturn: Precision 1e-006, Terms 2904/6365
000000.000: Module Mimas.dll ............. [Build 160828, API 160828]
SATSAT Mimas: Terms 113
000000.000: Module Enceladus.dll ......... [Build 160828, API 160828]
SATSAT Enceladus: Terms 33
000000.000: Module Tethys.dll ............ [Build 160828, API 160828]
SATSAT Tethys: Terms 101
000000.000: Module Dione.dll ............. [Build 160828, API 160828]
SATSAT Dione: Terms 59
000000.000: Module Rhea.dll .............. [Build 160828, API 160828]
SATSAT Rhea: Terms 68
000000.000: Module Titan.dll ............. [Build 160828, API 160828]
SATSAT Titan: Terms 100
000000.000: Module Iapetus.dll ........... [Build 160828, API 160828]
SATSAT Iapetus: Terms 605
000000.000: Module Uranus.dll ............ [Build 160828, API 160828]
VSOP87(B) Uranus: Precision 1e-006, Terms 1827/5269
000000.000: Module Miranda.dll ........... [Build ******, API 060425]
000000.000: Module Ariel.dll ............. [Build ******, API 060425]
000000.000: Module Umbriel.dll ........... [Build ******, API 060425]
000000.000: Module Titania.dll ........... [Build ******, API 060425]
000000.000: Module Oberon.dll ............ [Build ******, API 060425]
000000.000: Module Neptune.dll ........... [Build 160828, API 160828]
VSOP87(B) Neptune: Precision 1e-006, Terms 391/2024
000000.000: Finished initialising world
000000.000: Module SPACESHUTTLE2016D.dll . [Build 190216, API 160828]
000000.000: ---------------------------------------------------------------
000000.000: >>> WARNING: Obsolete API function used: VESSEL::CreateVariableDragElement
000000.000: At least one active module is accessing an obsolete interface function.
000000.000: Addons which rely on obsolete functions may not be compatible with
000000.000: future versions of Orbiter.
000000.000: ---------------------------------------------------------------
============================ ERROR: ===========================
Mesh not found: .\Meshes\2016SPACESHUTTLE\Atlantis\AtlantisORG2016E.msh
[MeshManager::LoadMesh | .\Mesh.cpp | 1238]
===============================================================
D3D9: ERROR: D3D9Client::clbkStoreMeshPersistent(2016SPACESHUTTLE\Atlantis\AtlantisORG2016E) hMesh is NULL
000000.000: Module Spacecraft3.dll ....... [Build ******, API 060425]
000000.000: ---------------------------------------------------------------
000000.000: >>> WARNING: Obsolete API function used: VESSEL::SetBankMomentScale
000000.000: At least one active module is accessing an obsolete interface function.
000000.000: Addons which rely on obsolete functions may not be compatible with
000000.000: future versions of Orbiter.
000000.000: ---------------------------------------------------------------
000000.000: XRSound 1.10 (Build Date: Mar  9 2018) initialized using sound driver DirectSound8; irrKlang version = 1.6.0.  XRSound UpdateInterval = 0.050 (20.0 updates per second)
000000.000: Finished initialising status
000000.000: Finished initialising camera
000000.000: Finished setting up render state
000000.000: D3D9: [Scene Initialized]
000000.000: GetVesselSoundID3(146E67F0)
000000.000: returned 1
000000.000: SoundOption3(1,16,0)
000000.000: SoundOption3(1,1,0)
000000.000: ReplaceStockOBSound3(1,none,10)
000000.000: ReplaceStockOBSound3(1,none,11)
000000.000: ReplaceStockOBSound3(1,Sound\Atlas3\Crista_Attack.wav,12)
000000.000: ReplaceStockOBSound3(1,Sound\Atlas3\Crista_Substain.wav,13)
000000.000: GetVesselSoundID3(146F5290)
000000.000: returned 2
000000.000: SoundOption3(2,16,0)
000000.000: SoundOption3(2,1,0)
000000.000: ReplaceStockOBSound3(2,none,10)
000000.000: ReplaceStockOBSound3(2,none,11)
000000.000: ReplaceStockOBSound3(2,Sound\Atlas3\Atlas3.wav,12)
000000.000: ReplaceStockOBSound3(2,none,13)
000000.000: GetVesselSoundID3(14730F18)
000000.000: returned 3
000000.000: SoundOption3(3,16,0)
000000.000: SoundOption3(3,1,0)
000000.000: Finished initialising panels
============================ ERROR: ===========================
Mesh not found: .\Meshes\.msh
[LoadMesh | .\Mesh.cpp | 1269]
===============================================================
============================ ERROR: ===========================
Mesh not found: .\Meshes\.msh
[LoadMesh | .\Mesh.cpp | 1269]
===============================================================
============================ ERROR: ===========================
Mesh not found: .\Meshes\.msh
[LoadMesh | .\Mesh.cpp | 1269]
===============================================================
============================ ERROR: ===========================
Mesh not found: .\Meshes\.msh
[LoadMesh | .\Mesh.cpp | 1269]
===============================================================
000011.960: D3D9: [Session Closed. Scene deleted.]
000011.960: D3D9: [Destroy Render Window Called]
D3D9: ERROR: UnDeleted Surface(s) Detected
D3D9: ERROR: Surface 0xDAA4FE0 (Fcd06_n.dds) (32,32)
D3D9: ERROR: Surface 0xDAA5388 (Fcd01_n.dds) (32,32)
D3D9: ERROR: Surface 0xDAA55F8 (Fcd04_n.dds) (32,32)
D3D9: ERROR: Surface 0xDAA5730 (Fcd05.dds) (32,32)
D3D9: ERROR: Surface 0xDAA5868 (Fcd03.dds) (32,32)
D3D9: ERROR: Surface 0xDAA5E80 (Fcd02.dds) (32,32)
D3D9: ERROR: Surface 0xDAA5FB8 (Fcd03_n.dds) (32,32)
D3D9: ERROR: Surface 0xDAA60F0 (Fcd05_n.dds) (32,32)
D3D9: ERROR: Surface 0xDAA6228 (Fcd06.dds) (32,32)
D3D9: ERROR: Surface 0xDAA6498 (Fcd02_n.dds) (32,32)
D3D9: ERROR: Surface 0xDAA65D0 (Fcd07.dds) (32,32)
D3D9: ERROR: Surface 0xDAA6840 (Fcd01.dds) (32,32)
D3D9: ERROR: Surface 0xDAA6AB0 (Fcd08.dds) (32,32)
D3D9: ERROR: Surface 0xDAA6BE8 (Fcd04.dds) (32,32)
D3D9: ERROR: Surface 0x10529C90 (Wall01.dds) (32,32)
D3D9: ERROR: Surface 0x10529DC8 (Taxiway1_n.dds) (128,128)
D3D9: ERROR: Surface 0x10529F00 (Taxiway2_n.dds) (128,128)
D3D9: ERROR: Surface 0x1052A038 (Fcd13.dds) (32,32)
D3D9: ERROR: Surface 0x1052A170 (Fcd12.dds) (32,32)
D3D9: ERROR: Surface 0x1052A2A8 (Lpad01.dds) (128,128)
D3D9: ERROR: Surface 0x1052A3E0 (Lpad01_n.dds) (128,128)
D3D9: ERROR: Surface 0x1052A518 (Monorail.dds) (64,64)
D3D9: ERROR: Surface 0x1052A650 (Door01.dds) (32,32)
D3D9: ERROR: Surface 0x1052A788 (Lpad02a.dds) (128,128)
D3D9: ERROR: Surface 0x1052A8C0 (Taxiway1.dds) (128,128)
D3D9: ERROR: Surface 0x1052A9F8 (Fcd11_n.dds) (32,32)
D3D9: ERROR: Surface 0x1052AB30 (Lpad02.dds) (128,128)
D3D9: ERROR: Surface 0x1052AC68 (Fcd09.dds) (32,32)
D3D9: ERROR: Surface 0x1052ADA0 (Lpad02a_n.dds) (128,128)
D3D9: ERROR: Surface 0x1052AED8 (Taxiway2.dds) (128,128)
D3D9: ERROR: Surface 0x1052B010 (Lpad02_n.dds) (128,128)
D3D9: ERROR: Surface 0x1052B148 (Fcd15.dds) (32,32)
D3D9: ERROR: Surface 0x1052B280 (Monorail_n.dds) (64,64)
D3D9: ERROR: Surface 0x1052B3B8 (Fcd10.dds) (32,32)
D3D9: ERROR: Surface 0x1052B4F0 (Roof01.dds) (32,32)
D3D9: ERROR: Surface 0x1052B628 (Fcd12_n.dds) (32,32)
D3D9: ERROR: Surface 0x1052B760 (Roof02.dds) (32,32)
D3D9: ERROR: Surface 0x1052B898 (Fcd11.dds) (32,32)
D3D9: ERROR: Surface 0x1052B9D0 (Fcd13_n.dds) (32,32)
D3D9: ERROR: Surface 0x1052BB08 (Fcd14.dds) (32,32)
D3D9: ERROR: Surface 0x105BB3F0 (clbkCreateSurface) (256,36)
D3D9: ERROR: Surface 0x1061F038 (Cape17.dds) (128,128)
D3D9: ERROR: Surface 0x1061F3E0 (Concrete1.dds) (256,256)
D3D9: ERROR: Surface 0x1061F650 (main_menu_tgt.dds) (1024,128)
D3D9: ERROR: Surface 0x1061F788 (Cape23.dds) (128,128)
D3D9: ERROR: Surface 0x1061FED8 (Cape23_n.dds) (128,128)
D3D9: ERROR: Surface 0x10620010 (main_menu.dds) (1024,256)
D3D9: ERROR: Surface 0x10620148 (Ball.dds) (64,64)
D3D9: ERROR: Surface 0x10620280 (Cape19.dds) (128,128)
D3D9: ERROR: Surface 0x106204F0 (Runway2.dds) (256,256)
D3D9: ERROR: Surface 0x10620628 (Cape22.dds) (128,128)
D3D9: ERROR: Surface 0x10620760 (Hangrail_n.dds) (64,64)
D3D9: ERROR: Surface 0x10620898 (Solpanel.dds) (128,128)
D3D9: ERROR: Surface 0x106209D0 (Cape18.dds) (128,128)
D3D9: ERROR: Surface 0x10620B08 (transp.dds) (4,4)
D3D9: ERROR: Surface 0x10620C40 (Hangrail.dds) (64,64)
D3D9: ERROR: Surface 0x10620D78 (Cape20.dds) (128,128)
D3D9: ERROR: Surface 0x10620EB0 (clbkCreateTexture) (2,2)
D3D9: ERROR: Surface 0x107BDE10 (clbkCreateSurfaceEx) (255,13)
D3D9: ERROR: Surface 0x107BDF48 (clbkCreateSurfaceEx) (255,13)
D3D9: ERROR: Surface 0x107BE1B8 (clbkCreateSurfaceEx) (255,13)
D3D9: ERROR: Surface 0x107BE2F0 (clbkCreateSurfaceEx) (255,13)
D3D9: ERROR: Surface 0x107BE428 (clbkCreateSurfaceEx) (255,13)
D3D9: ERROR: Surface 0x107BE560 (clbkCreateSurfaceEx) (255,13)
D3D9: ERROR: Surface 0x107BE7D0 (clbkCreateSurfaceEx) (255,13)
D3D9: ERROR: Surface 0x107BE908 (clbkCreateSurfaceEx) (255,13)
D3D9: ERROR: Surface 0x107BEA40 (clbkCreateSurfaceEx) (255,13)
D3D9: ERROR: Surface 0x107BEB78 (clbkCreateSurfaceEx) (255,13)
D3D9: ERROR: Surface 0x107BECB0 (clbkCreateSurfaceEx) (255,13)
D3D9: ERROR: Surface 0x107BEDE8 (clbkCreateSurfaceEx) (255,13)
D3D9: ERROR: Surface 0x107BEF20 (clbkCreateSurfaceEx) (255,13)
D3D9: ERROR: Surface 0x107BF538 (Cockpit\hud.dds) (512,256)
D3D9: ERROR: Surface 0x107BF670 (clbkCreateSurfaceEx) (255,13)
D3D9: ERROR: Surface 0x107BF7A8 (clbkCreateSurfaceEx) (255,13)
D3D9: ERROR: Surface 0x107BFA18 (clbkCreateSurfaceEx) (255,13)
D3D9: ERROR: Surface 0x107BFB50 (clbkCreateSurfaceEx) (255,13)
D3D9: ERROR: Surface 0x107BFC88 (clbkCreateSurfaceEx) (255,13)
D3D9: ERROR: Surface 0x18464DF0 (clbkCreateSurfaceEx) (617,16)
D3D9: ERROR: Surface 0x18464F28 (clbkCreateSurfaceEx) (256,256)
D3D9: ERROR: Surface 0x18465198 (clbkCreateSurfaceEx) (256,256)
D3D9: ERROR: Surface 0x184652D0 (clbkCreateSurfaceEx) (256,256)
D3D9: ERROR: Surface 0x18465408 (clbkCreateSurfaceEx) (14,162)
D3D9: ERROR: Surface 0x184657B0 (clbkCreateSurfaceEx) (256,256)
D3D9: ERROR: Surface 0x184658E8 (clbkCreateSurfaceEx) (256,256)
D3D9: ERROR: Surface 0x18465B58 (clbkCreateSurfaceEx) (256,256)
D3D9: ERROR: Surface 0x18465C90 (clbkCreateSurfaceEx) (512,512)
D3D9: ERROR: Surface 0x18465DC8 (clbkCreateSurfaceEx) (119,108)
D3D9: ERROR: Surface 0x18465F00 (clbkCreateSurfaceEx) (98,74)
D3D9: ERROR: Surface 0x18466038 (clbkCreateSurfaceEx) (14,111)
D3D9: ERROR: Surface 0x18466170 (clbkCreateSurfaceEx) (256,256)
D3D9: ERROR: Surface 0x18466518 (clbkCreateSurfaceEx) (108,108)
D3D9: ERROR: Surface 0x18466B30 (clbkCreateSurfaceEx) (256,256)
D3D9: ERROR: Surface 0x18466C68 (clbkCreateSurfaceEx) (256,256)
D3D9: ERROR: Surface 0x18467010 (clbkCreateSurfaceEx) (256,256)
D3D9: ERROR: Surface 0x18467148 (clbkCreateSurfaceEx) (256,256)
D3D9: ERROR: Surface 0x18467280 (clbkCreateSurfaceEx) (256,256)
000011.960: XRSound 1.10 (Build Date: Mar  9 2018) terminating.
D3D9: ERROR: 31 un-released fonts!
D3D9: ERROR: 9 un-released brushes!
D3D9: ERROR: 26 un-released pens!
000011.960: **** Respawning Orbiter process


**** Orbiter.log
000000.000: Build Aug 28 2016 [v.160828]
000000.000: Timer precision: 6.41633e-007 sec
000000.000: Found 0 joystick(s)
000000.000: Module AtlantisConfig.dll .... [Build 160828, API 160828]
000000.000: Module AtmConfig.dll ......... [Build 160828, API 160828]
000000.000: Module DGConfigurator.dll .... [Build 160828, API 160828]
000000.000: ---------------------------------------------------------------
BaseDir    : C:\ORBITER 2016\ORBITER 2016 THD\
ConfigDir  : C:\ORBITER 2016\ORBITER 2016 THD\Config\
MeshDir    : C:\ORBITER 2016\ORBITER 2016 THD\Meshes\
TextureDir : C:\ORBITER 2016\ORBITER 2016 THD\Textures\
HightexDir : C:\ORBITER 2016\ORBITER 2016 THD\Textures2\
ScenarioDir: C:\ORBITER 2016\ORBITER 2016 THD\Scenarios\
000000.000: ---------------------------------------------------------------
000000.000: Module D3D9Client.dll ........ [Build 190225, API 160828]
============================ ERROR: ===========================
Failed loading module Modules\Plugin\CamShake.dll (code 126)
[Orbiter::LoadModule | .\Orbiter.cpp | 600]
===============================================================
============================ ERROR: ===========================
Failed loading module Modules\Plugin\InterMFD56.dll (code 126)
[Orbiter::LoadModule | .\Orbiter.cpp | 600]
===============================================================
000000.000: Module LunarTransferMFD.dll .. [Build 160829, API 160815]
============================ ERROR: ===========================
Failed loading module Modules\Plugin\Map3DMFD.dll (code 126)
[Orbiter::LoadModule | .\Orbiter.cpp | 600]
===============================================================
============================ ERROR: ===========================
Failed loading module Modules\Plugin\ReFuelMFD.dll (code 126)
[Orbiter::LoadModule | .\Orbiter.cpp | 600]
===============================================================
000000.000: Module ScriptMFD.dll ......... [Build 160828, API 160828]
000000.000: Module Multistage2015_MFD.dll  [Build 170626, API 160828]
000000.000: Module InterMFD57.dll ........ [Build 161216, API 160910]
000000.000: ---------------------------------------------------------------
000000.000: >>> WARNING: Obsolete API function used: oapiRegisterMFDMode
000000.000: At least one active module is accessing an obsolete interface function.
000000.000: Addons which rely on obsolete functions may not be compatible with
000000.000: future versions of Orbiter.
000000.000: ---------------------------------------------------------------
000000.000: Module Meshdebug.dll ......... [Build 160828, API 160828]
000000.000: Module LuaMFD.dll ............ [Build 160828, API 160828]
000000.000: Module transx.dll ............ [Build 160216, API 160214]
000000.000: Module CustomMFD.dll ......... [Build 160828, API 160828]
000000.000: Module AttitudeMFD.dll ....... [Build ******, API 060425]
000000.000: Module HUDdataMFD.dll ........ [Build ******, API 060425]
000000.000: Module LuaConsole.dll ........ [Build 160828, API 160828]
000000.000: Module ExtMFD.dll ............ [Build 160828, API 160828]
============================ ERROR: ===========================
Failed loading module Modules\Plugin\DX9ExtMFD.dll (code 126)
[Orbiter::LoadModule | .\Orbiter.cpp | 600]
===============================================================
000000.000: Module FlightData.dll ........ [Build 160828, API 160828]
000000.000: Module Framerate.dll ......... [Build 160828, API 160828]
000000.000: Module Rcontrol.dll .......... [Build 160828, API 160828]
000000.000: Module ScnEditor.dll ......... [Build 160828, API 160828]
000000.000: Module XRSound.dll ........... [Build 180309, API 160828]
000000.000: Module OrbiterSound.dll ...... [Build 180310, API 160828]

Below an excerpt from the scenario.

Code: 
BEGIN_SHIPS
STS-66:Shuttle2016B
  STATUS Orbiting Earth
  RPOS -841814.23 -5926352.39 2990791.79
  RVEL -7647.819 1032.589 -86.674
  AROT -87.40 -13.07 -122.45
  AFCMODE 7
  PRPLEVEL 0:0.861239
  NAVFREQ 0 0
  CONFIGURATION 3
  OV 104 
  ORIGINAL 
  RENDER 
  RMSARM 
  CARGODOOR 1 1.0000
  KUBAND 1 1.0000
  POSTLAND 0 0.0000
  SSMES 1 1.0000
  ADTA 0 0.0000
  PETD 0 0.0000
  SETD 1 1.0000
  ARMTILT 0 0.0000 0 0.0000
  PRADIATOR 0 0.0000
  SRADIATOR 0 0.0000
  GEAR 0 0.0000
  PAYLOAD_MASS1 0.0000
  PAYLOAD_MASS2 0.0000
  PAYLOAD_MASS3 0.0000
  ARM_STATUS 0.5000 0.0151 0.0162 0.5000 0.5000 0.5000
  PL1_OFS 0.000000 -1.330000 1.200000   ;<<<<<< Crista-Spas sat >>>>
  PL1_DIR 0.000000 1.000000 0.000000
  PL1_ROT 0.000000 0.000000 1.000000
  PL2_OFS 0.060000 -0.650000 4.300000   ;<<<<<< Atlas-03 palette >>>>
  PL2_DIR 0.000000 1.000000 0.000000
  PL2_ROT 0.000000 0.000000 1.000000
  PL3_OFS 0.000000 0.200000 2.000000
  PL3_DIR 0.000000 1.000000 0.000000
  PL3_ROT 0.000000 0.000000 1.000000
  PL4_OFS 0.000000 0.400000 7.685000   ;<<<<<< Supports / Attaches >>>>
  PL4_DIR 0.000000 1.000000 0.000000
  PL4_ROT 0.000000 0.000000 1.000000
  PL5_OFS 2.130000 0.300000 8.300000   ;<<<<<< SSBUV-7 >>>>
  PL5_DIR 0.000000 1.000000 0.000000
  PL5_ROT 0.000000 0.000000 1.000000
  PL6_OFS 0.000000 0.200000 4.500000
  PL6_DIR 0.000000 1.000000 0.000000
  PL6_ROT 0.000000 0.000000 1.000000
  KEEL_CAM 0.145000 -0.500000 -1.356000
  OMS 
  CALLOUT 
END
 
Last edited:
STS-66

Hello Gattis and Pappy - I've done this file for STS-66 and it works fine. You'll need to do the conf files - but it works. It is with the default pad:

BEGIN_DESC
MISSION ATLANTIS STS-66

END_DESC

BEGIN_ENVIRONMENT
System Sol
Date MJD 49659.7043
END_ENVIRONMENT

BEGIN_FOCUS
Ship ET-66
END_FOCUS

BEGIN_CAMERA
TARGET ET-66
MODE Extern
POS 4.51 173.21 76.17
TRACKMODE GlobalFrame
FOV 40.00
END_CAMERA

BEGIN_HUD
TYPE Surface
END_HUD

BEGIN_MFD Left
TYPE Surface
SPDMODE 1
END_MFD



BEGIN_SHIPS
ET-66:Multistage2015
STATUS Landed Earth
POS -80.6208210 28.6274170
HEADING 0.00
ALT 47.361
AROT 151.065 -8.240 4.530
ATTACHED 0:0,MS_LaunchPad_ET-66
AFCMODE 7
PRPLEVEL 0:1.000000 1:1.000000
NAVFREQ 0 0 0 0
XPDR 0
CONFIG_FILE Config\Multistage2015\Space-Shuttle_STS-66new.ini
GUIDANCE_FILE Config\Multistage2015\Guidance\guidance_shuttle_STS-66real.txt
CONFIGURATION 0
CURRENT_BOOSTER 1
CURRENT_STAGE 1
CURRENT_INTERSTAGE 1
CURRENT_PAYLOAD 1
FAIRING 0
MET -30.000
BATTERY 5400.000000
STAGE_IGNITION_TIME 0.000000
STAGE_STATE 1
TELEMETRY_FILE Config\Multistage2015\Telemetry\guidance_shuttle_STS-66real.text
ALT_STEPS 100.0,350.0,1400.0,35000.0
PEG_PITCH_LIMIT 35.000
PEG_MC_INTERVAL 0.100
RAMP
END
MS_LaunchPad_ET-66:EmptyModule
STATUS Landed Earth
POS -80.6208600 28.6271740
HEADING 2.00
ALT -2.500
AROT 151.047 -8.224 4.525
AFCMODE 7
NAVFREQ 0 0
END
MS_Camera:MS_Camera
STATUS Landed Earth
POS -80.6238630 28.6070927
HEADING 180.57
ALT 0.000
AROT -118.284 -4.474 171.752
AFCMODE 7
NAVFREQ 0 0
TARGET ET-66
END
STS-66:Shuttle2016B
STATUS Landed Earth
POS -80.6208900 28.6271740
HEADING 2.00
ALT 0.000
AROT 99.922 -54.902 51.216
ATTACHED 0:0,ET-66
PRPLEVEL 0:1.000000
NAVFREQ 0 0
CONFIGURATION 3
GEAR 0 0.0000
HATCH 0 0.0000
Armtilt 0 0.0000
OV 104
RMSARM
PAYLOAD_MASS1 3.0000
PAYLOAD_MASS2 0.0000
PAYLOAD_MASS3 0.0000
ARM_STATUS 0.5000 0.0151 0.0162 0.5000 0.5000 0.5000
PL1_OFS 0.000000 -1.330000 1.200000 ;<<<<<< Crista-Spas sat >>>>
PL1_DIR 0.000000 1.000000 0.000000
PL1_ROT 0.000000 0.000000 1.000000
PL2_OFS 0.060000 -0.650000 4.300000 ;<<<<<< Atlas-03 palette >>>>
PL2_DIR 0.000000 1.000000 0.000000
PL2_ROT 0.000000 0.000000 1.000000
PL3_OFS 0.000000 0.200000 2.000000
PL3_DIR 0.000000 1.000000 0.000000
PL3_ROT 0.000000 0.000000 1.000000
PL4_OFS 0.000000 0.400000 7.685000 ;<<<<<< Supports / Attaches >>>>
PL4_DIR 0.000000 1.000000 0.000000
PL4_ROT 0.000000 0.000000 1.000000
PL5_OFS 2.130000 0.300000 8.300000 ;<<<<<< SSBUV-7 >>>>
PL5_DIR 0.000000 1.000000 0.000000
PL5_ROT 0.000000 0.000000 1.000000
PL6_OFS 0.000000 0.200000 4.500000
PL6_DIR 0.000000 1.000000 0.000000
PL6_ROT 0.000000 0.000000 1.000000
KEEL_CAM 0.145000 -0.500000 -1.356000
OMS
CALLOUT
TGT_HEADING 57. 303.00
END
CRISTA-SPAS:Atlas3\CRISTA-SPAS
STATUS Orbiting Earth
ATTACHED 0:0,STS-66
AFCMODE 7
PRPLEVEL 0:1.000000
NAVFREQ 0 0
RCS 1
CTRL_SURFACE 1
CONFIGURATION 1
CURRENT_PAYLOAD 0
END
ATLAS-03:Atlas3\ATLAS-03
STATUS Orbiting Earth
ATTACHED 0:2,STS-66
AFCMODE 7
PRPLEVEL 0:1.000000
NAVFREQ 0 0
RCS 1
CTRL_SURFACE 1
CONFIGURATION 1
CURRENT_PAYLOAD 0
END
SSBUV-7:Atlas3\SSBUV-7
STATUS Orbiting Earth
ATTACHED 0:5,STS-66
AFCMODE 7
END
Attachement:Atlas3\Attachement
STATUS Orbiting Earth
ATTACHED 0:4,STS-66
AFCMODE 7
END
END_SHIPS
 
Thank you friends for your help. :thumbup:
And here's the result: :hailprobe:

STS-66 MISSION "jacquesmomo"
[ame="https://www.orbithangar.com/searchid.php?ID=6752"]STS-66 MISSION.[/ame]





 
Last edited:
Pappy2 - Beautiful images - glad it works! Gattis did a great job of putting the fleet together.

Gattis - will you release the cool looking blue stripe "Constitution" reskin?
 
Your welcome
Here are 2 images to help build the shuttles for other flights.
SRBs
PtPinWV.jpg

ET
IEaPonY.jpg
 
Hello "gattispilot"
do you think it is possible to adapt the ADDON of "hutchison66"
[ame="https://www.orbithangar.com/searchid.php?ID=7029"]Shuttlefleet High detail ET and SRB's[/ame]
(Shuttlefleet High detail ET and SRB's)

in order to have all varieties of tank and SRB
 
Short answer is yes. What I did was unzipped into a new folder for meshes and textures. Then changed the mesh to direct to the correct folder.

Then just change the mesh of the tank.
Code: 
[STAGE_1]
Height=46.88 
Diameter=8.7
EmptyMass=26535
FuelMass=728715.23
Thrust=6539030.025
BurnTime=504.1
off=(-0.05,0,13.401)
MeshName=[COLOR="Red"]"NEWSHUTTLE\SHUTTLE_TANK"[/COLOR]
eng_1=(-1.6,7.93,-27.88)
eng_2=( 1.6,7.93,-27.88)
eng_3=( 0.0,11.33,-27.03)
DIR=(0.0, 0.25885, -0.96545)
eng_diameter=2.0
speed=(0,0,-10)
ENG_TEX=Exhaust_atsme
battery=1.5
Reignitable=0
the booster a little harder. I renamed them NEWSHUTTLE\Shuttle_rsrb_1 and NEWSHUTTLE\Shuttle_lsrb_1

then in the ini:
Code: 
[BOOSTER_1]
N=1
MeshName="[COLOR="Red"]NEWSHUTTLE\Shuttle_lsrb[/COLOR]"
Height=38.5
Diameter=3.71 
EmptyMass=66406
FuelMass=503487
Thrust=14739770.25
angle=0.0
off=(-6,0.,2.115)
BurnTime=122.0
eng_1=(-0.2,0,-22.5)
eng_diameter=2.2
ENG_PSTREAM1=solidfuel_exhaust
ENG_PSTREAM2=contrail4
Speed=(15,0,0)
Rot_speed=(0,-0.4,0)
CURVE_1=(-1,0)
CURVE_2=(0,100)
CURVE_3=(30.3,100)
CURVE_4=(35.5,87)
CURVE_5=(60.0,87)
CURVE_6=(65.1,100)
CURVE_7=(103,100)
CURVE_8=(115,85)
CURVE_9=(136,5)

[BOOSTER_2]
N=1
MeshName="[COLOR="red"]NEWSHUTTLE\Shuttle_rsrb[/COLOR]"
Height=38.5
Diameter=3.71 
EmptyMass=66406
FuelMass=503487
Thrust=14739770.25
angle=0.0
off=(6,0.,2.115)
BurnTime=122.0
eng_1=(-0.2,0,-22.5)
eng_diameter=2.2
ENG_PSTREAM1=solidfuel_exhaust
ENG_PSTREAM2=contrail4
Speed=(15,0,0)
Rot_speed=(0,-0.4,0)
CURVE_1=(-1,0)
CURVE_2=(0,100)
CURVE_3=(30.3,100)
CURVE_4=(35.5,87)
CURVE_5=(60.0,87)
CURVE_6=(65.1,100)
CURVE_7=(103,100)
CURVE_8=(115,85)
CURVE_9=(136,5)
 
Thank you "gattispilot",
I managed to install all with your explanations.

But for takeoff when I select "AND" to make it work with MS15 ignition engines and boosters does not work!

Do you have an idea ??



 
Last edited:
I don't think it can be done. The launch is done via MS2015 which I don't think has that function
 
Any way you can do it with VB ?
 
But it has triggers.
 
What's odd is that if I change the central tank's unique but keeping your boosters running with MS2015 works.




But when I use the "hutchinson" boosters after the countdown of the MFD no ignition!
 
You must log in or register to reply here.

Similar threads

J
Vessel Shuttle II (Survivable Crew Compartment Space Shuttle)
Replies
0
Views
2K
Jeremyxxx
J
polaris149Tiberius
General Question Orbiter 2016 Stock Space Shuttle Study Project -1.0
Replies
0
Views
1K
polaris149Tiberius
polaris149Tiberius
Mark Rober Fan
  • Sticky
Tutorial [Resource] Orbiter 2016 – Verified Download Mirrors (Wayback + Forum Archive)
Replies
6
Views
10K
Mark Rober Fan
Mark Rober Fan
polaris149Tiberius
Project Tutorial Development On Orbiter 2016 Stock Space Shuttle to ISS Scenario Case Study Project -v1.0
Replies
7
Views
4K
polaris149Tiberius
polaris149Tiberius
K
Hello, rediscovering my passion for spaceflight
Replies
3
Views
2K
N_Molson
N_Molson
Back
Top