Search OBSS for Shuttle Fleet 4.7
- Thread starter Chub777
- Start date
ky
Director of Manned Spaceflight
Its in the scenario file
Code:
STS-153:Shuttle
STATUS Landed Earth
POS -80.6041340 28.6083120
HEADING 0.00
AFCMODE 7
PRPLEVEL 0:1.000000 1:1.000000 2:1.000000
NAVFREQ 0 0
CONFIGURATION 0
OV- 103
RENDER
RMSARM
ISSV1
OBSS <-----------------------------------------------
CARGODOOR 0 0.0000
KUBAND 0 0.0000
POSTLAND 0 0.0000
SSMES 0 0.0000
ADTA 0 0.0000
PETD 0 0.0000
SETD 0 0.0000
ARMTILT 0 0.0000 0 0.0000
PRADIATOR 0 0.0000
SRADIATOR 0 0.0000
GEAR 0 0.0000
PAYLOAD_MASS1 3.0000
PAYLOAD_MASS2 0.0000
PAYLOAD_MASS3 0.0000
ARM_STATUS 0.5000 0.0151 0.0162 0.5000 0.5000 0.5000
ARM_SEQ1 0.5468 0.3240 0.3153 0.1258 0.4342 0.5000
ARM_SEQ2 0.7315 0.5539 0.7881 0.2691 0.4943 0.5887
ARM1SET
ARM2SET
PL1_OFS 0.000000 0.000000 0.000000
PL1_DIR 0.000000 1.000000 0.000000
PL1_ROT 0.000000 0.000000 1.000000
PL2_OFS 2.550000 2.150000 3.850000
PL2_DIR 0.000000 1.000000 0.000000
PL2_ROT 1.000000 0.000000 0.000000
PL3_OFS -1.850000 1.800000 11.750000
PL3_DIR 0.000000 1.000000 0.000000
PL3_ROT 0.000000 0.000000 1.000000
PL4_OFS 0.000000 1.000000 -5.500000
PL4_DIR 0.000000 -1.000000 0.000000
PL4_ROT 0.000000 0.000000 1.000000
PL5_OFS 2.200000 1.800000 -6.250000
PL5_DIR 0.000000 1.000000 0.000000
PL5_ROT 0.000000 0.000000 1.000000
PL6_OFS 1.850000 1.800000 11.750000
PL6_DIR 0.000000 1.000000 0.000000
PL6_ROT 0.000000 0.000000 1.000000
KEEL_CAM 0.145000 -0.500000 -1.356000
OMS
CALLOUT
TGT_HEADING 90.00 548.00
ASSIST 134.000000 145.000000
ENDMy one has ODS though:
Code:
Endeavour:Shuttle
STATUS Orbiting Earth
RPOS -1733857.76 -6231476.36 1319382.70
RVEL -6894.555 1199.604 -3395.129
AROT 160.82 62.33 -34.32
VROT -0.06 -0.00 -0.00
PRPLEVEL 0:0.878
NAVFREQ 0 0
CONFIGURATION 3
OV- 105
RMSARM
[COLOR="Red"] ODS <--------------------------------------[/COLOR]
CARGODOOR 1 1.0000
KUBAND 1 1.0000
POSTLAND 0 0.0000
SSMES 1 1.0000
ADTA 0 0.0000
PETD 0 0.0000
SETD 0 0.0000
ARMTILT 1 1.0000 1 1.0000
PRADIATOR 0 0.0000
SRADIATOR 0 0.0000
GEAR 0 0.0000
PAYLOAD_MASS 0.0000
ARM_STATUS 0.5000 0.1122 0.0849 0.5000 0.5000 0.5000
ARM_SEQ1 0.5000 0.1852 0.1705 0.5208 0.5000 0.5000
ARM1SET
SAT_OFS_X 0.000
SAT_OFS_Y 0.000
SAT_OFS_Z 0.000
END
PhantomCruiser
Wanderer
It's in the manual (page 14).
Ok. Thanks.
Cras
Spring of Life!
- Joined
- Apr 13, 2011
- Messages
- 2,215
- Reaction score
- 0
- Points
- 36
- Location
- Los Angeles
- Website
- www.youtube.com
be aware, using the OBSS with Shuttle Fleet has some small issues. Well one small one that makes it difficult to use in hand offs and undocking, is that it drifts while being held by the RMS arm.
Can you post a scenario or elaborate on this comment? I've never heard of this issue, so fixing it can't be accomplished until I can see and reproduce it.
Dave
---------- Post added at 17:45 ---------- Previous post was at 17:43 ----------
Please read the manual. The use of the scenario line entry "OBSS" establishes the required attachment points for the OBSS and MPMs associated with Donamy's OBSS, it doesn't in any way add the OBSS to the shuttle.
Dave
PhantomCruiser
Wanderer
Yeah, I forgot to mention that (what Dave said).
Here is a snip from a scenario...
It really isn't hard to do, but it is in the manual.
Here is a snip from a scenario...
Code:
ShuttleBay:ISSR\STSBAY
STATUS Landed Earth
POS 0.0000000 0.0000000
HEADING 0.00
ATTACHED 0:0,STS-154
AFCMODE 7
NAVFREQ 0 0
STS 115
EMU 0 0
TIMER 523.6475 526.7475 590.7475
OBSS
MPM 0 0.0000 -1
END
OBSS:ISSR\OBSS
STATUS Landed Earth
POS 0.0000000 0.0000000
HEADING 0.00
ATTACHED 0:1,ShuttleBay
AFCMODE 7
NAVFREQ 0 0
ENDIt really isn't hard to do, but it is in the manual.
zerofay32
Buckeye
Ah, PhantomCruiser, the code you posted is from Thorton's ISS addon and is dependant on it. To have the OBSS with Donamy's OBSS and the basic Shuttle Fleet, you need these lines;
*taken from pg 29 of the Shuttle Fleet Manual.
Code:
Ultra_MPMs:spacecraft\spacecraft3
STATUS Orbiting Earth
RPOS 4038679.98 872864.10 -5157460.15
RVEL 4558.467 4561.647 4326.861
AROT 172.27 -34.83 -60.14
ATTACHED 0:7,[NAME OF SHUTTLE VESSEL]
NAVFREQ 0 0
RCS 1
CTRL_SURFACE 1
CONFIGURATION 1
CURRENT_PAYLOAD 0
SEQ 0 2 0.999400
SEQ 1 -2 0.000000
END
Ultra_OBSS:spacecraft\spacecraft3
STATUS Orbiting Earth
RPOS 4038679.62 872863.77 -5157460.30
RVEL 4558.467 4561.647 4326.861
AROT 172.27 -34.83 -60.14
ATTACHED 0:2,[NAME OF SHUTTLE VESSEL]
NAVFREQ 0 0
RCS 1
CTRL_SURFACE 1
CONFIGURATION 1
CURRENT_PAYLOAD 0
END*taken from pg 29 of the Shuttle Fleet Manual.
Last edited:
Cras
Spring of Life!
- Joined
- Apr 13, 2011
- Messages
- 2,215
- Reaction score
- 0
- Points
- 36
- Location
- Los Angeles
- Website
- www.youtube.com
I first noticed the issue when I tried to hand off the OBSS with the SSRMS, to the Shuttles RMS arm. I had to use the stations arm since while docked, there is really no way to get the shuttles arm over there. Plus that is how the real guys do it.
While grappled by the SSRMS at the mid grapple fixture, the OBSS drifted, or more like rotated around the grappled point. Made trying to capture it with the RMS a bit of a challenge, but certainly not impossible.
On another mission I decided to position the OBSS arm in the "docking monitor" position, for lack of knowing the official term, it is where the shuttle arm grapples the OBSS and positions it near the aft of the payload bay at a 90 degree angle so the end camera can show the station. After doing a simulated tile sweep shortly after getting into orbital configuration, I decided to just leave the arm in that configuration rather than stow it back on the starboard side of the payload bay, and while I was chasing down the ISS, I noticed the same phenomena, the rotating of the OBSS around the grapple point.
When I get the chance, since I am not at my Orbiter machine at the moment, I will save it when I see it occuring and send over to you the scenario file and see if it is just me seeing this issue.
ky
Director of Manned Spaceflight
Oh sorry about the mistake with that.I've read the manual but forgot the part about attaching it in the shuttle bay.Since ive never attached an OBSS to a shuttle bay I dont exactly know how to do it.
PhantomCruiser
Wanderer
:facepalm:
Doh!
I've been flying capsules for so long I keep misplacing some of the nuts-and-bolts of things like this.... With shuttle I'm about 1/2 through with Thorton's ISS, so I think I defaulted to it. Thanks Zerofay32!
Doh!
I've been flying capsules for so long I keep misplacing some of the nuts-and-bolts of things like this.... With shuttle I'm about 1/2 through with Thorton's ISS, so I think I defaulted to it. Thanks Zerofay32!
Similar threads
