OHM Multistage2015 - for Orbiter 2010P1

[fred18]

Can you detail it more: what's wrong exactly? The issue is in orbiter 2010 or 2016 or both? The log seems perfect.

---------- Post added at 09:34 ---------- Previous post was at 09:25 ----------

I just realized that it was " i can't load --- well and no matter ariane 5", while I read "I can't load well --- and no matter ariane 5 " :rofl:

---------- Post added at 10:11 ---------- Previous post was at 09:34 ----------

Ok, I found out: in MS2015 if boosters has particle streams definition at least one engine position for them has to be defined, so in boosters group you have to add eng_1 and eng_2 with the position of the two engines of the boosters.

hope it's not a big deal

 

[Interceptor]

HI fred18,my assumption was right about what was causing your MS_Hangar,and MS_Crawler to blink in the default orbiter 2010,I raised the MS_hangar using universal cargo deck just a few notches above the ground and it stopped blinking,and the same with the MS_Crawler,so if you just raise up the cog a little on both the MS_Crawler,and the MS_Hangar the blinking effect is terminated.

 

[romanasul]

Can you detail it more: what's wrong exactly? The issue is in orbiter 2010 or 2016 or both? The log seems perfect.

---------- Post added at 09:34 ---------- Previous post was at 09:25 ----------

I just realized that it was " i can't load --- well and no matter ariane 5", while I read "I can't load well --- and no matter ariane 5 " :rofl:

---------- Post added at 10:11 ---------- Previous post was at 09:34 ----------

Ok, I found out: in MS2015 if boosters has particle streams definition at least one engine position for them has to be defined, so in boosters group you have to add eng_1 and eng_2 with the position of the two engines of the boosters.

hope it's not a big deal

Thanks Fred, I never would have figured that out, I spent hours changing things around to try to find out.

 

[fred18]

Thanks Fred, I never would have figured that out, I spent hours changing things around to try to find out.

That's how I did it, it can be useful for the future:
I commented out one by one the payload, stage, booster etc sections (it's enough to put ";" before the [SECTION] in the ini file) in order to figure out which section was causing the issue.

I found out that it was the booster section, so I started to comment out non mandatory parameters and found out it was the particles.

I opened without particle definitions, checked the DMD and I noticed that the engine section was empty so I tried and it worked!

HI fred18,my assumption was right about what was causing your MS_Hangar,and MS_Crawler to blink in the default orbiter 2010,I raised the MS_hangar using universal cargo deck just a few notches above the ground and it stopped blinking,and the same with the MS_Crawler,so if you just raise up the cog a little on both the MS_Crawler,and the MS_Hangar the blinking effect is terminated.

Thanks Interceptor! that's very useful! I'll update the cog position in the next release!!

 

[Johan2011]

Hey @fred18, i got a Problem. The Tracking Camera does not track the Rocket. You Can Help Me?

 

[fred18]

Hey @fred18, i got a Problem. The Tracking Camera does not track the Rocket. You Can Help Me?

I can try!
Can you explain me with more details what's going on? maybe with a screenshot or 2, and with the log file, scn file and ini file?
Thank you