ISS V2.0 Soyuz problem

[george7378]

Hi all,

Whenever I try to initiate a scenario using the ISS V2.0 Soyuz, I get the following problems in the log file:

**** Orbiter.log
Build Sep 29 2006 [v.060929]
Devices enumerated: 3
Devices accepted: 3
==> RGB Emulation
==> Direct3D HAL
==> Direct3D T&L HAL
Found 1 joystick(s)
Module AtlantisConfig.dll [API v.060425]
Module DGConfig.dll [API v.060425]
Module ProjectApolloConfigurator.dll [API v.060425]
Module OrbiterSound.dll [API v.060425]
Module ScnEditor.dll [API v.060425]
Module AeroBrakeMFD.dll [API v.060425]
Module BaseSyncMFD.dll [API v.060425]
Module InterMFD53.dll [API v.060425]
Module Default_Scenario.dll [API v.060425]
Module ProjectApolloMFD.dll [API v.060425]
Module PEGAutopilot.dll [API v.060425]
Module LolaMFD.dll [API v.050206]
Module LunarTransferMFD.dll [API v.060425]

**** Creating simulation session
DirectDraw interface OK
Direct3D interface OK
Zbuffer: 32 bit
Stencil buffer: 8 bit
Render device: Fullscreen 1024 x 768
Device has hardware T&L capability
Joystick throttle: Z-AXIS
Joystick throttle control detected
Module Sun.dll [API v.050206]
VSOP87(E) Sun: Precision 1e-006, Terms 554/6634
Module Earth.dll [API v.050206]
VSOP87(B) Earth: Precision 1e-008, Terms 2564/2564
**** WARNING: Mesh not found: .\Meshes\STSpad39B.msh
BaseObject: Parse error 1
Module Moon.dll [API v.041022]
ELP82: Precision 1e-005, Terms 116/829
Finished initialising world
Module ISS.dll [API v.060425]
Module PMA.dll [API v.060425]
Module OTD.dll [API v.060425]
Module Strela.dll [API v.060425]
Module SouyzTMA.dll [API v.060425]
Module SAS.dll [API v.060425]
Module TMA_fairing.dll [API v.060425]
>>> ERROR: Could not load vessel module:
>>>        [C:\Source\Orbiter\Vessel.cpp / 4982]
>>> ERROR: r7_blockI_M
>>>        [C:\Source\Orbiter\Vessel.cpp / 4983]
>>> ERROR: Could not load vessel module:
>>>        [C:\Source\Orbiter\Vessel.cpp / 4982]
>>> ERROR: tailskirt
>>>        [C:\Source\Orbiter\Vessel.cpp / 4983]
>>> ERROR: Could not load vessel module:
>>>        [C:\Source\Orbiter\Vessel.cpp / 4982]
>>> ERROR: tailskirt
>>>        [C:\Source\Orbiter\Vessel.cpp / 4983]
>>> ERROR: Could not load vessel module:
>>>        [C:\Source\Orbiter\Vessel.cpp / 4982]
>>> ERROR: tailskirt
>>>        [C:\Source\Orbiter\Vessel.cpp / 4983]
>>> ERROR: Could not load vessel module:
>>>        [C:\Source\Orbiter\Vessel.cpp / 4982]
>>> ERROR: r7_first_stage
>>>        [C:\Source\Orbiter\Vessel.cpp / 4983]
>>> ERROR: Could not load vessel module:
>>>        [C:\Source\Orbiter\Vessel.cpp / 4982]
>>> ERROR: r7_first_stage
>>>        [C:\Source\Orbiter\Vessel.cpp / 4983]
>>> ERROR: Could not load vessel module:
>>>        [C:\Source\Orbiter\Vessel.cpp / 4982]
>>> ERROR: r7_first_stage
>>>        [C:\Source\Orbiter\Vessel.cpp / 4983]
>>> ERROR: Could not load vessel module:
>>>        [C:\Source\Orbiter\Vessel.cpp / 4982]
>>> ERROR: r7_first_stage
>>>        [C:\Source\Orbiter\Vessel.cpp / 4983]
>>> ERROR: No vessel class configuration file found for:
>>> ERROR: r7_second_stage
>>>        [C:\Source\Orbiter\Vessel.cpp / 248]
>>> TERMINATING <<<

I have re-installed many times, as well as downloaded it again.

Thanks.

 

[clickypens]

Have you downloaded [ame="http://www.orbithangar.com/searchid.php?ID=2844"]Project R-7[/ame] ? It's needed for the launcher.

 

[george7378]

No I haven't - thanks for the tip. Judging by the code errors, I imagine that was the problem.

 

[clickypens]

Yeah, thorton's pretty specific about that specific Soyuz launcher too. You can't put it on a CVEL Soyuz nor on Mustard's, so make sure you get that one I linked to up there.

 

[Kyle]

I'm also having an extremely significant issue with the Soyuz launcher too.. happens always after I jettison the stage and the soyuz when I reach orbit, once the solar panels are deployed about a minute afterwords I get a CTD and it doesn't state a problem..

**** Orbiter.log
Build Sep 29 2006 [v.060929]
Devices enumerated: 3
Devices accepted: 3
==> RGB Emulation
==> Direct3D HAL
==> Direct3D T&L HAL
Found 1 joystick(s)
Module AtlantisConfig.dll [API v.060425]
Module DGConfig.dll [API v.060425]
Module EnergyConfigurator.dll [API v.060425]
Module ProjectApolloConfigurator.dll [API v.060425]
Module OrbiterSound.dll [API v.060425]
Module TrackIR.dll [API v.060425]
TrackIR module not found.
Module ScnEditor.dll [API v.060425]
Module Rcontrol.dll [API v.050206]
Module Framerate.dll [API v.050206]
Module FlightData.dll [API v.050206]
Module ExtMFD.dll [API v.060425]
Module CustomMFD.dll [API v.060425]
Module CRT.dll [API v.060425]
Module AutoFCS.dll [API v.050206]
Module LolaMFD.dll [API v.050206]
Module LunarTransferMFD.dll [API v.060425]
Module PylonMFD.dll [API v.060425]
Module GPCMFD.dll [API v.060425]
Module CamShake.dll [API v.050206]
Module AutoFCS-STS.dll [API v.050206]
Module LaunchMFD.dll [API v.060425]
Module UniversalPointing.dll [API v.060425]
Module AttitudeMFD.dll [API v.050206]
Module ITSArrayMFD.dll [API v.060425]
Module AeroBrakeMFD.dll [API v.060425]

**** Creating simulation session
DirectDraw interface OK
Direct3D interface OK
Zbuffer: 32 bit
Render device: Window 1434 x 874
Device has hardware T&L capability
Joystick throttle: SLIDER 0
No joystick throttle control detected
ERROR: DInput error DIERR_OBJECTNOTFOUND
       [C:\Source\Orbiter\Orbiter.cpp / 1624]
Module Sun.dll [API v.050206]
VSOP87(E) Sun: Precision 1e-006, Terms 554/6634
Module Earth.dll [API v.050206]
VSOP87(B) Earth: Precision 1e-008, Terms 2564/2564
Module Moon.dll [API v.041022]
ELP82: Precision 1e-005, Terms 116/829
Finished initialising world
Module ISS.dll [API v.060425]
Module APFR.dll [API v.060425]
Module OTD.dll [API v.060425]
Module Strela.dll [API v.060425]
Module PMA.dll [API v.060425]
Module P6.dll [API v.060425]
Module SSRMS.dll [API v.060425]
Module SouyzTMA.dll [API v.060425]
Module SAS.dll [API v.060425]
Module TMA_fairing.dll [API v.060425]
Module r7_first_stage.dll [API v.060425]
Module r7_launchpad.dll [API v.060425]
Module r7_second_stage.dll [API v.060425]
Module r7_blockI_M.dll [API v.060425]
Module tailskirt.dll [API v.060425]
Module r7_launchpad_M.dll [API v.060425]
Finished initialising status
Finished initialising camera
Finished initialising panels
Finished setting up render state

I've attempted to reinstall the addon and I still get the same problem.. suggestions?

 

[Thorton]

In every scenario?
Try to delete all except soyuz and launcher from scenario and then launch.

 

[Kyle]

In every scenario?

Every last one unfortunately including Progress and the Pirs mission.

 

[garyw]

Do you have any zero bye config files or meshes?