OrbitHangar
Addon Comments
- Joined
- Apr 9, 2008
- Messages
- 3,832
- Reaction score
- 18
- Points
- 0
OHM ISS Dumont
- Thread starter OrbitHangar
- Start date
Interceptor
Well-known member
Hi,just curious to see if anyone has this working in orbiter2010P1,I tried several combinations with spacecraft 3 ini,and keep getting CTDs,but if anyone has got this ship to work please tell. PS I know it's an oldie,but it certainly is a goodie.Thanks
garyw
O-F Administrator
- Joined
- May 14, 2008
- Messages
- 10,547
- Reaction score
- 347
- Points
- 158
- Location
- East Sussex
- Website
- blog.gdwnet.com
- Preferred Pronouns
- He/Him
SC3 should have no issues with orbiter 2010 - as long as you have the stage.dll patch. Can you post the scenario and the ini file?
Interceptor
Well-known member
Here you go GaryW,and thank you
---------- Post added at 03:42 AM ---------- Previous post was at 03:41 AM ----------
and here
---------- Post added at 03:43 AM ---------- Previous post was at 03:42 AM ----------
also here
Code:
LIFT]
PT0=(-180,0)
PT1=(-60,0)
PT2=(-30,-0.2)
PT3=(-1,0)
PT4=(15,0.8)
PT5=(20,1)
PT6=(25,0.8)
PT7=(60,0)
PT8=(180,0)
[CONFIG]
MESHNAME="dumont"
SIZE=100
EMPTY_MASS=40000000
FUEL_MASS=200000000
MAIN_THRUST=20000.16e5
RETRO_THRUST=0
HOVER_THRUST=0
ATTITUDE_THRUST=4000000
ISP=900000
PMI=(78.2,82.1,10.7)
CW_Z_POS=0.5
CW_Z_NEG=0.5
CW_X=1.5
CW_Y=1.5
CROSS_SECTION=(40.8,50.1,90)
COG=8
PITCH_MOMENT_SCALE=0.0002
BANK_MOMENT_SCALE=0.0002
ROT_DRAG=(0.5,1.0,1.0)
WING_ASPECT=0.7
WING_EFFECTIVENESS=0
FOCUS=0
VISIBLE=0
CAMERA=(0,2.66,89.2)
[EX_MAIN_0]
OFF=(-2,4.8,-94)
DIR=(0,0,-1)
LENGTH=6
WIDTH=2
[EX_MAIN_1]
OFF=(2,4.8,-94)
DIR=(0,0,-1)
LENGTH=6
WIDTH=2
[EX_MAIN_2]
OFF=(-2,0.6,-94)
DIR=(0,0,-1)
LENGTH=6
WIDTH=2
[EX_MAIN_3]
OFF=(2,0.6,-94)
DIR=(0,0,-1)
LENGTH=6
WIDTH=2
[EX_ATT_0]
OFF=(1.80,0,19.0)
DIR=(0.174,-0.985,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=X
ROT_CW=0
LIN_AXIS=Y
LIN_CW=0
[EX_ATT_1]
OFF=(1.80, 0, 18.6)
DIR=(0.174,-0.985,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=X
ROT_CW=0
LIN_AXIS=Y
LIN_CW=0
[EX_ATT_2]
OFF=(-1.75, 0, 19.2)
DIR=(-0.174,-0.985,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=X
ROT_CW=0
LIN_AXIS=Y
LIN_CW=0
[EX_ATT_3]
OFF=(-1.75, 0, 18.8)
DIR=(-0.174,-0.985,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=X
ROT_CW=0
LIN_AXIS=Y
LIN_CW=0
[EX_ATT_4]
OFF=(-4.0,3.3,-12.7)
DIR=(0, 1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=X
ROT_CW=0
LIN_AXIS=Y
LIN_CW=1
[EX_ATT_5]
OFF=(-4.0, 3.3,-13.0)
DIR=(0,1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=X
ROT_CW=0
LIN_AXIS=Y
LIN_CW=1
[EX_ATT_6]
OFF=(-4.0, 3.3,-13.3)
DIR=(0, 1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=X
ROT_CW=0
LIN_AXIS=Y
LIN_CW=1
[EX_ATT_7]
OFF=(4.0,3.3,-12.7)
DIR=(0,1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=X
ROT_CW=0
LIN_AXIS=Y
LIN_CW=1
[EX_ATT_8]
OFF=(4.0,3.3,-13.0)
DIR=(0,1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=X
ROT_CW=0
LIN_AXIS=Y
LIN_CW=1
[EX_ATT_9]
OFF=(4.0,3.3,-13.3)
DIR=(0,1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=X
ROT_CW=0
LIN_AXIS=Y
LIN_CW=1
[EX_ATT_10]
OFF=(-0.3, 1.15,18.5)
DIR=(0,1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=X
ROT_CW=1
LIN_AXIS=Y
LIN_CW=1
[EX_ATT_11]
OFF=(0.1,1.2,18.5)
DIR=(0,1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=X
ROT_CW=1
LIN_AXIS=Y
LIN_CW=1
[EX_ATT_12]
OFF=(0.5,1.15,18.5)
DIR=(0,1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=X
ROT_CW=1
LIN_AXIS=Y
LIN_CW=1
[EX_ATT_13]
OFF=(-4.0,1.9,-12.7)
DIR=(0,-1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=X
ROT_CW=1
LIN_AXIS=Y
LIN_CW=0
[EX_ATT_14]
OFF=(-4.0, 1.9,-13.0)
DIR=(0,-1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=X
ROT_CW=1
LIN_AXIS=Y
LIN_CW=0
[EX_ATT_15]
OFF=(-4.0,1.9,-13.3)
DIR=(0,-1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=X
ROT_CW=1
LIN_AXIS=Y
LIN_CW=0
[EX_ATT_16]
OFF=(4.0,1.9,-12.7)
DIR=(0,-1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=X
ROT_CW=1
LIN_AXIS=Y
LIN_CW=0
[EX_ATT_17]
OFF=(4.0, 1.9,-13.0)
DIR=(0,-1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=X
ROT_CW=1
LIN_AXIS=Y
LIN_CW=0
[EX_ATT_18]
OFF=(4.0,1.9,-13.3)
DIR=(0,-1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=X
ROT_CW=1
LIN_AXIS=Y
LIN_CW=0
[EX_ATT_19]
OFF=(2.0,-0.15,18.4)
DIR=(1,0,0)
LENGTH=0.6
WIDTH=0.8
ROT_AXIS=Y
ROT_CW=0
LIN_AXIS=X
LIN_CW=1
[EX_ATT_20]
OFF=(2.0,0.15,18.4)
DIR=(1,0,0)
LENGTH=0.6
WIDTH=0.8
ROT_AXIS=Y
ROT_CW=0
LIN_AXIS=X
LIN_CW=1
[EX_ATT_21]
OFF=(-1.7,0.22,18.5)
DIR=(-1,0,0)
LENGTH=0.6
WIDTH=0.8
ROT_AXIS=Y
ROT_CW=1
LIN_AXIS=X
LIN_CW=0
[EX_ATT_22]
OFF=(-1.7,-0.11,18.5)
DIR=(-1,0,0)
LENGTH=0.6
WIDTH=0.8
ROT_AXIS=Y
ROT_CW=1
LIN_AXIS=X
LIN_CW=0
[EX_ATT_23]
OFF=(-4.3,2.45,-12.7)
DIR=(-1,0,0)
LENGTH=0.6
WIDTH=0.8
ROT_AXIS=Y
ROT_CW=0
LIN_AXIS=X
LIN_CW=0
[EX_ATT_24]
OFF=(-4.3,2.45,-13.05)
DIR=(-1,0,0)
LENGTH=0.6
WIDTH=0.8
ROT_AXIS=Y
ROT_CW=0
LIN_AXIS=X
LIN_CW=0
[EX_ATT_25]
OFF=(-4.3,2.45,-13.4)
DIR=(-1,0,0)
LENGTH=0.6
WIDTH=0.8
ROT_AXIS=Y
ROT_CW=0
LIN_AXIS=X
LIN_CW=0
[EX_ATT_26]
OFF=(-4.3,2.45,-13.65)
DIR=(-1,0,0)
LENGTH=0.6
WIDTH=0.8
ROT_AXIS=Y
ROT_CW=0
LIN_AXIS=X
LIN_CW=0
[EX_ATT_27]
OFF=(4.5,2.45,-12.7)
DIR=(1,0,0)
LENGTH=0.6
WIDTH=0.8
ROT_AXIS=Y
ROT_CW=1
LIN_AXIS=X
LIN_CW=1
[EX_ATT_28]
OFF=(4.5,2.45,-13.05)
DIR=(1,0,0)
LENGTH=0.6
WIDTH=0.8
ROT_AXIS=Y
ROT_CW=1
LIN_AXIS=X
LIN_CW=1
[EX_ATT_29]
OFF=(4.5,2.45,-13.4)
DIR=(1,0,0)
LENGTH=0.6
WIDTH=0.8
ROT_AXIS=Y
ROT_CW=1
LIN_AXIS=X
LIN_CW=1
[EX_ATT_30]
OFF=(4.5,2.45,-13.65)
DIR=(1,0,0)
LENGTH=0.6
WIDTH=0.8
ROT_AXIS=Y
ROT_CW=1
LIN_AXIS=X
LIN_CW=1
[EX_ATT_31]
OFF=(1.80,0,19.0)
DIR=(0.174,-0.985,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=Z
ROT_CW=1
[EX_ATT_32]
OFF=(1.80,0,18.6)
DIR=(0.174,-0.985,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=Z
ROT_CW=0
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=Z
ROT_CW=1
[EX_ATT_33]
OFF=(4.0, 1.9,-12.7)
DIR=(0,-1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=Z
ROT_CW=1
[EX_ATT_34]
OFF=(4.0,1.9,-13.0)
DIR=(0,-1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=Z
ROT_CW=1
[EX_ATT_35]
OFF=(4.0,1.9,-13.3)
DIR=(0,-1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=Z
ROT_CW=1
[EX_ATT_36]
OFF=(-1.75,0,19.2)
DIR=(-0.174,-0.985,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=Z
ROT_CW=0
[EX_ATT_37]
OFF=(-1.75,0,18.8)
DIR=(-0.174,-0.985,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=Z
ROT_CW=0
[EX_ATT_38]
OFF=(-4.0, 1.9,-12.7)
DIR=(0,-1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=Z
ROT_CW=0
[EX_ATT_39]
OFF=(-4.0, 1.9,-13.0)
DIR=(0,-1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=Z
ROT_CW=0
[EX_ATT_40]
OFF=(-4.0, 1.9,-13.3)
DIR=(0,-1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=Z
ROT_CW=0
[EX_ATT_41]
OFF=(4.0,3.3,-12.7)
DIR=(0,1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=Z
ROT_CW=0
[EX_ATT_42]
OFF=(4.0,3.3,-13.0)
DIR=(0, 1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=Z
ROT_CW=0
[EX_ATT_43]
OFF=(4.0,3.3,-13.3)
DIR=(0, 1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=Z
ROT_CW=0
[EX_ATT_44]
OFF=(-4.0,3.3,-12.7)
DIR=(0,1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=Z
ROT_CW=1
[EX_ATT_45]
OFF=(-4.0,3.3,-13.0)
DIR=(0,1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=Z
ROT_CW=1
[EX_ATT_46]
OFF=(-4.0,3.3,-13.3)
DIR=(0,1,0)
LENGTH=0.6
WIDTH=0.4
ROT_AXIS=Z
ROT_CW=1
[EX_ATT_47]
OFF=(-3.50,2.7,-14)
DIR=(0,0,-1)
LENGTH=0.6
WIDTH=0.4
LIN_AXIS=Z
LIN_CW=0
[EX_ATT_48]
OFF=(-3.95,2.7,-14)
DIR=(0,0,-1)
LENGTH=0.6
WIDTH=0.4
LIN_AXIS=Z
LIN_CW=0
[EX_ATT_49]
OFF=(3.65,2.75,-14)
DIR=(0,0,-1)
LENGTH=0.6
WIDTH=0.4
LIN_AXIS=Z
LIN_CW=0
[EX_ATT_50]
OFF=(4.05,2.75,-14)
DIR=(0,0,-1)
LENGTH=0.6
WIDTH=0.4
LIN_AXIS=Z
LIN_CW=0
[EX_ATT_51]
OFF=(0,0.6,20)
DIR=(0,0,1)
LENGTH=0.6
WIDTH=0.4
LIN_AXIS=Z
LIN_CW=1
[EX_ATT_52]
OFF=(-0.4,0.55,20)
DIR=(0,0,1)
LENGTH=0.6
WIDTH=0.4
LIN_AXIS=Z
LIN_CW=1
[EX_ATT_53]
OFF=(0.4,0.55,20)
DIR=(0,0,1)
LENGTH=0.6
WIDTH=0.4
LIN_AXIS=Z
LIN_CW=1
[ANIM_SEQ_0]
;Rotor
KEY=k
DURATION=800000000000000000000000000
DEFAULT=0.0
[ANIM_SEQ_1]
;Bay1
KEY=g
DURATION=10
DEFAULT=0.0
[ANIM_COMP_0]
;Rotor
SEQ=0
GROUPS=16,17,18,19,20,21,22,24,30,32,36,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54
RANGE=(0,1)
ROT_PNT=(0,2.75,0)
ROT_AXIS=(0,0,1)
ANGLE=14400000000000000000000000000
[ANIM_COMP_1]
;inf E
SEQ=1
GROUPS=37
RANGE=(0,1)
ROT_PNT=(0,-0.6,0)
ROT_AXIS=(0,0,1)
ANGLE=92
[ANIM_COMP_2]
;inf D
SEQ=1
GROUPS=58
RANGE=(0,1)
ROT_PNT=(0,-0.6,0)
ROT_AXIS=(0,0,1)
ANGLE=-92
[ANIM_COMP_3]
;sup D
SEQ=1
GROUPS=59
RANGE=(0,1)
ROT_PNT=(0,5.2,0)
ROT_AXIS=(0,0,1)
ANGLE=92
[ANIM_COMP_4]
;sup E
SEQ=1
GROUPS=38
RANGE=(0,1)
ROT_PNT=(0,5.2,0)
ROT_AXIS=(0,0,1)
ANGLE=-92---------- Post added at 03:42 AM ---------- Previous post was at 03:41 AM ----------
and here
Code:
; === Configuration file for Dumont ===
ClassName = dumont
Module = spacecraft-old---------- Post added at 03:43 AM ---------- Previous post was at 03:42 AM ----------
also here
Code:
BEGIN_DESC
The ISS Dumont, ready to explore the interplanetary space.
K-Rotates
G-Open Bay Doors
END_DESC
BEGIN_ENVIRONMENT
System Sol
Date MJD 55989.3014205556
END_ENVIRONMENT
BEGIN_FOCUS
Ship Dumont
END_FOCUS
BEGIN_CAMERA
TARGET Dumont
MODE Extern
POS 1.82 -161.75 -9.85
TRACKMODE TargetRelative
FOV 40.00
END_CAMERA
BEGIN_HUD
TYPE Docking
END_HUD
BEGIN_MFD Left
TYPE Docking
NAV 0
END_MFD
BEGIN_MFD Right
TYPE COM/NAV
END_MFD
BEGIN_SHIPS
ISS:ProjectAlpha_ISS
STATUS Orbiting Earth
RPOS 4081470.13 4890614.93 -2171122.17
RVEL 5954.961 -4875.246 222.096
AROT 109.78 -8.91 79.34
PRPLEVEL 0:1.000
DOCKINFO 1:0,Dumont
IDS 0:588 100 1:586 100 2:584 100 3:582 100 4:580 100
NAVFREQ 0 0
XPDR 466
END
Dumont:spacecraft\dumont
STATUS Orbiting Earth
RPOS 4081406.72 4890623.54 -2171112.46
RVEL 5954.961 -4875.246 222.096
AROT -120.77 -76.14 139.72
RCSMODE 2
PRPLEVEL 0:1.000
DOCKINFO 0:1,ISS 1:0,GL-01 2:0,SH-01 3:0,MMU1 4:0,MMU2
IDS 0:588 100 1:586 100 2:584 100 3:582 100 4:580 100
NAVFREQ 586 0
XPDR 482
CONFIGURATION 1
CURRENT_PAYLOAD 0
SEQ 0 1 0.000000
SEQ 1 -2 0.006200
END
MMU1:nasa_mmu
STATUS Orbiting Earth
RPOS 4081432.76 4890615.15 -2171114.77
RVEL 5954.961 -4875.246 222.096
AROT -120.77 -76.14 139.72
RCSMODE 2
PRPLEVEL 0:1.000
DOCKINFO 0:3,Dumont
NAVFREQ 582 0
END
MMU2:nasa_mmu
STATUS Orbiting Earth
RPOS 4081434.13 4890623.36 -2171117.79
RVEL 5954.961 -4875.246 222.096
AROT -120.77 -76.14 139.72
RCSMODE 2
PRPLEVEL 0:1.000
DOCKINFO 0:4,Dumont
NAVFREQ 580 0
END
GL-01:Deltaglider
STATUS Orbiting Earth
RPOS 4081422.60 4890627.32 -2171100.33
RVEL 5954.961 -4875.246 222.096
AROT -161.89 10.53 170.94
RCSMODE 2
PRPLEVEL 0:1.000 1:1.000
DOCKINFO 0:1,Dumont
NAVFREQ 586 0 0 0
XPDR 468
NOSECONE 1 1.0000
END
SH-01:ShuttleA
STATUS Orbiting Earth
RPOS 4081415.40 4890614.94 -2171136.63
RVEL 5954.961 -4875.246 222.096
AROT 18.11 -10.53 9.06
RCSMODE 2
PRPLEVEL 0:1.000 1:1.000
DOCKINFO 0:2,Dumont
NAVFREQ 584 0
XPDR 468
PODANGLE 0.0000 0.0000
DOCKSTATE 1 1.0000
AIRLOCK 0 0.0000
GEAR 0 0.0000
PAYLOAD MASS 0.0 0
END
END_SHIPS
IronRain
The One and Only (AFAIK)
- Joined
- Oct 11, 2009
- Messages
- 3,488
- Reaction score
- 407
- Points
- 123
- Location
- Utrecht
- Website
- www.spaceflightnewsapi.net
I think it's the config file. Back it up and try the following:
Code:
; === Configuration file for Dumont ===
ClassName = Spacecraft
Module = Spacecraft3
Code:
BEGIN_DESC
The ISS Dumont, ready to explore the interplanetary space.
K-Rotates
G-Open Bay Doors
END_DESC
BEGIN_ENVIRONMENT
System Sol
Date MJD 55989.3014205556
END_ENVIRONMENT
BEGIN_FOCUS
Ship Dumont
END_FOCUS
BEGIN_CAMERA
TARGET Dumont
MODE Extern
POS 1.82 -161.75 -9.85
TRACKMODE TargetRelative
FOV 40.00
END_CAMERA
BEGIN_HUD
TYPE Docking
END_HUD
BEGIN_MFD Left
TYPE Docking
NAV 0
END_MFD
BEGIN_MFD Right
TYPE COM/NAV
END_MFD
BEGIN_SHIPS
ISS:ProjectAlpha_ISS
STATUS Orbiting Earth
RPOS 4081470.13 4890614.93 -2171122.17
RVEL 5954.961 -4875.246 222.096
AROT 109.78 -8.91 79.34
PRPLEVEL 0:1.000
DOCKINFO 1:0,Dumont
IDS 0:588 100 1:586 100 2:584 100 3:582 100 4:580 100
NAVFREQ 0 0
XPDR 466
END
Dumont:Dumont
STATUS Orbiting Earth
RPOS 4081406.72 4890623.54 -2171112.46
RVEL 5954.961 -4875.246 222.096
AROT -120.77 -76.14 139.72
RCSMODE 2
PRPLEVEL 0:1.000
DOCKINFO 0:1,ISS 1:0,GL-01 2:0,SH-01 3:0,MMU1 4:0,MMU2
IDS 0:588 100 1:586 100 2:584 100 3:582 100 4:580 100
NAVFREQ 586 0
XPDR 482
CONFIGURATION 1
CURRENT_PAYLOAD 0
SEQ 0 1 0.000000
SEQ 1 -2 0.006200
END
MMU1:nasa_mmu
STATUS Orbiting Earth
RPOS 4081432.76 4890615.15 -2171114.77
RVEL 5954.961 -4875.246 222.096
AROT -120.77 -76.14 139.72
RCSMODE 2
PRPLEVEL 0:1.000
DOCKINFO 0:3,Dumont
NAVFREQ 582 0
END
MMU2:nasa_mmu
STATUS Orbiting Earth
RPOS 4081434.13 4890623.36 -2171117.79
RVEL 5954.961 -4875.246 222.096
AROT -120.77 -76.14 139.72
RCSMODE 2
PRPLEVEL 0:1.000
DOCKINFO 0:4,Dumont
NAVFREQ 580 0
END
GL-01:Deltaglider
STATUS Orbiting Earth
RPOS 4081422.60 4890627.32 -2171100.33
RVEL 5954.961 -4875.246 222.096
AROT -161.89 10.53 170.94
RCSMODE 2
PRPLEVEL 0:1.000 1:1.000
DOCKINFO 0:1,Dumont
NAVFREQ 586 0 0 0
XPDR 468
NOSECONE 1 1.0000
END
SH-01:ShuttleA
STATUS Orbiting Earth
RPOS 4081415.40 4890614.94 -2171136.63
RVEL 5954.961 -4875.246 222.096
AROT 18.11 -10.53 9.06
RCSMODE 2
PRPLEVEL 0:1.000 1:1.000
DOCKINFO 0:2,Dumont
NAVFREQ 584 0
XPDR 468
PODANGLE 0.0000 0.0000
DOCKSTATE 1 1.0000
AIRLOCK 0 0.0000
GEAR 0 0.0000
PAYLOAD MASS 0.0 0
END
END_SHIPSAssuming that the configuration file called Dumont.
Last edited:
Interceptor
Well-known member
Thanks IronRain,and thanks again Garyw.
IronRain
The One and Only (AFAIK)
- Joined
- Oct 11, 2009
- Messages
- 3,488
- Reaction score
- 407
- Points
- 123
- Location
- Utrecht
- Website
- www.spaceflightnewsapi.net
If that doesn't work try this:
In the config\spacecraft folder you'll find Dumont.cfg and Dumond.ini. Move the Dumont.cfg to the config\vessels folder.
In the config\spacecraft folder you'll find Dumont.cfg and Dumond.ini. Move the Dumont.cfg to the config\vessels folder.
Interceptor
Well-known member
OOPS! sorry IronRain this is actualy the spacecraft file,the previous file was one I made for the vessels folder.
---------- Post added at 04:25 AM ---------- Previous post was at 04:19 AM ----------
OK tried it the second way,the first way didn't work,and now I am getting this error.Thanks
---------- Post added at 04:33 AM ---------- Previous post was at 04:25 AM ----------
OK IronRain, if you can get it working please post up the configs,and scenario.Thanks
Code:
; === Configuration file for vessel class ESA Carina ===
ClassName = dumont
Module = spacecraft-old
EnableXPDR=TRUE
XPDR=482
BEGIN_DOCKLIST
0.06 2.52 93.26 0 0 1 0 1 0 540
-10.57 3 26.32 -1 0 0 0 1 0 542
10.67 3 26.32 1 0 0 0 1 0 544
-0.06 -3.8 55.5 0 0 -1 0 -1 0 546
-0.06 9.65 55.5 0 0 -1 0 1 0 548
END_DOCKLIST---------- Post added at 04:25 AM ---------- Previous post was at 04:19 AM ----------
OK tried it the second way,the first way didn't work,and now I am getting this error.Thanks
Code:
>>> ERROR: No vessel class configuration file found for:
---------------------------------------------------------------
>>> ERROR: spacecraft\dumont
>>> [Vessel::OpenConfigFile | .\Vessel.cpp | 252]
---------------------------------------------------------------
>>> TERMINATING <<<---------- Post added at 04:33 AM ---------- Previous post was at 04:25 AM ----------
OK IronRain, if you can get it working please post up the configs,and scenario.Thanks
IronRain
The One and Only (AFAIK)
- Joined
- Oct 11, 2009
- Messages
- 3,488
- Reaction score
- 407
- Points
- 123
- Location
- Utrecht
- Website
- www.spaceflightnewsapi.net
Alright, fix:
1. Move the Dumont.cfg to the config\vessels folder
2. open Dumont.cfg and change the following:
3. open the scenario and change the following section:
This should fix it
1. Move the Dumont.cfg to the config\vessels folder
2. open Dumont.cfg and change the following:
Code:
; === Configuration file for vessel class ESA Carina ===
[COLOR="Red"]ClassName = spacecraft
Module = spacecraft3[/COLOR]
EnableXPDR=TRUE
XPDR=482
BEGIN_DOCKLIST
0.06 2.52 93.26 0 0 1 0 1 0 540
-10.57 3 26.32 -1 0 0 0 1 0 542
10.67 3 26.32 1 0 0 0 1 0 544
-0.06 -3.8 55.5 0 0 -1 0 -1 0 546
-0.06 9.65 55.5 0 0 -1 0 1 0 548
END_DOCKLIST3. open the scenario and change the following section:
Code:
Dumont:[COLOR="red"]spacecraft\spacecraft3[/COLOR]
STATUS Orbiting Earth
RPOS 4081406.72 4890623.54 -2171112.46
RVEL 5954.961 -4875.246 222.096
AROT -120.77 -76.14 139.72
RCSMODE 2
PRPLEVEL 0:1.000
DOCKINFO 0:1,ISS 1:0,GL-01 2:0,SH-01 3:0,MMU1 4:0,MMU2
IDS 0:588 100 1:586 100 2:584 100 3:582 100 4:580 100
NAVFREQ 586 0
XPDR 482
CONFIGURATION 1
CURRENT_PAYLOAD 0
SEQ 0 1 0.000000
SEQ 1 -2 0.006200
ENDThis should fix it
Interceptor
Well-known member
Nope that fix didn't work either.
IronRain
The One and Only (AFAIK)
- Joined
- Oct 11, 2009
- Messages
- 3,488
- Reaction score
- 407
- Points
- 123
- Location
- Utrecht
- Website
- www.spaceflightnewsapi.net
Try removing all the other vessels from the scenario.. otherwise I'm out of options.
Interceptor
Well-known member
OK,I got it working now,thanks for the advice IronRain,but I am getting device not available on the docking MFD,any ideas?
---------- Post added at 06:03 AM ---------- Previous post was at 04:34 AM ----------
---------- Post added at 06:03 AM ---------- Previous post was at 04:34 AM ----------
OK,all is working now,the error mysteriously went away,HMM.
Last edited:
Similar threads
- Locked
- Sticky