While we do have a few of the extra panels added, the specific ones for J missions are not functional at the moment such as anything for O2 tank 3. So don't be alarmed that you cant find/use many of these things yet.As I press on with the Apollo 15 flight, I'm going to come up with a lot of questions, such as...
Where is the O2 ISOL/AUX BAT cb located? I can't find it listed anywhere.
And my O2 TANK 3 ISOL vlv tb is barberpoled, it should be gray, and I can't figure out how to control it.
I'm thinking these cb's/switches are unique to the J missions/Apollo 15, and may not yet be fully integrated into NASSP?
You need to use the uplinks page to uplink a new REFSMMAT. You CLC the REFSMMAT on the UTILITIES->REFSMMAT page then go back to UPLINKS and select the CMC REFSMMAT Update option (12) and then since this will be a desired REFSMMAT, type 2 when you hit CLC and it asked for actual or desired.I did the first P52 REFSMATT using the launch orientation (went well). Then to change the REFSMATT I navigated from the RTCC main page to UTI>REFSMMAT and selected OPT>PTC and CLC to calculate. Then to uplink it I used G00 to input G00,CSM,LCV,CSM,CUR;*.
Then when I performed the P52 Preferred realign I get a PROG alarm 1301.
So where am I going wrong, and how can I correct it? Do I just need to maneuver to get a better angle?
Thanks
The G00 is used in conjunction with the MPT to move the REFSMMAT and for your purposes is not what you need to use to uplink a REFSMMAT, that is exclusive to the uplinks page which probably explains your 1301 as you tried a desired REFSMMAT without anything stored.