- Joined
- Mar 23, 2008
- Messages
- 1,330
- Reaction score
- 1,655
- Points
- 128
- Website
- francisdrakex.deviantart.com
This is an old post, but an interesting one! I wonder, if the story has been published in the meantime?
Made a stick model based on Staiduk's skectches, see below.
Design liberties I took:
- The crew module turns 180° between cruise and maneuver orientation, as already proposed by dgatsoulis.
- Only one single boom, with a clevis (fork head) to simplify mechanical design. I would also suggest to delete the telescoping, as this is technically complex. Better to add weight into strengthing the trusses rather than complicated mechanics.
- Added heat radiators to the rear section. If the vessel really accelerates at 0.5 g its engine will be blazing hot! I would rather reduce the acceleration to 0.1 g or even lower. This would only extend the powered flight from 1 h to 10 h, but drastically reduce power consumption and mechanical loads on the vessel.
Made a stick model based on Staiduk's skectches, see below.
Design liberties I took:
- The crew module turns 180° between cruise and maneuver orientation, as already proposed by dgatsoulis.
- Only one single boom, with a clevis (fork head) to simplify mechanical design. I would also suggest to delete the telescoping, as this is technically complex. Better to add weight into strengthing the trusses rather than complicated mechanics.
- Added heat radiators to the rear section. If the vessel really accelerates at 0.5 g its engine will be blazing hot! I would rather reduce the acceleration to 0.1 g or even lower. This would only extend the powered flight from 1 h to 10 h, but drastically reduce power consumption and mechanical loads on the vessel.