HAL9001
super-ninja-orbinaut
Hello everyone!
i have a problem with a multistage-2-vessel - on the whole: I just don't know how to properly create one.
I have that guidance-file:
(yes it's complicated and gives strange profile, but thats cause my engines are airbreathing...)
and i now have this ini-file:
and this scn.-file:
(although date and time isn't correct, jet...)
And yes - the multistage-ini-file is a changed version of the A6JM-Add-on and the mesh will look strange... - that's cause I didn't want to create the whole new file and I don't care about strange mesh, etc... I just wanted to make a video of it and copy it together with a solidworks-rendering, so the mesh is no problem - but when I nw start the scenario it ctd's...
So since I' a noobat multistage2 I would now need help - could omeone find the mistake and correct it for me -sincee i already tried to find it for overr an hour and I didn't...
I would be grateful for any helpful answers,
greetings:tiphat:, HAL9001
i have a problem with a multistage-2-vessel - on the whole: I just don't know how to properly create one.
I have that guidance-file:
Code:
0=engine(0,23.5,1)
01=engine(23.5,83,5)
13=pitch(90,13,5)
18=pitch(13,7,5)
23=pitch(7,5.5,5)
28=pitch(5.5,4,5)
33=pitch(4,3,5)
38=pitch(3,3,5)
43=pitch(3,1.5,5)
48=pitch(1.5,1.7,5)
53=pitch(1.7,1.5,5)
58=pitch(1.5,0.9,5)
63=pitch(0.9,1.7,5)
68=pitch(1.7,2,3,5)
73=pitch(2.3,2.6,5)
78=pitch(2.6,3.3,5)
83=pitch(3.3,4,5)
86=engine(83,87,10)
88=pitch(4,4.9,5)
93=pitch(4.9,5.7,5)
96=engine(87,92,10)
103=pitch(5.7,7.6,10)
106=engine(92,93,6.5)
112.5=enigine(93,0,1)
113=pitch(7.6,14.8,10)
122.7=engine(0,98,9)
123=pitch(14.8,17.3,10)
133=pitch(17.3,14,10)
143=pitch(14,17.1,10)
153=pitch(17.1,16.6,10)
163=pitch(16.6,14.1,10)
173=pitch(14.1,11.6,10)
183=pitch(11.6,8.6,10)
193=pitch(8.6,5.6,10)
203=pitch(5.6,0.4,20)
210.5=engine(98,0,1)
221=engine(0,98,9)
223=pitch(0.4,-2,20)
243=pitch(-2,-3,20)
263=pitch(-3,-2,20)
275.5=engine(98,0,1)
285.7=engine(0,98,9)
283=pitch(-2,0,20)
303=pitch(0,-3,30)
333=pitch(-3,5,30)
340.5=engine(-98,0,1)
350.5=engine(0,93,11.8)
362.5=engine(93,89.10)
363=pitch(5,-12,30)
372.5=engine(89,82,20)
392.5=engine(82,78,20)
393=pitch(-12,-14,30)
412.7=engine(78,0,1)
422.9=engine(0,74,6.6)
423=pitch(-14,-21,40)
429.5=engine(74,65,25.5)
455=engine(65,82,40)
463=pitch(-21,-6,40)
496.2=engine(82,0,1)
503=pitch(-6,0,50)
506.5=engine(0,83,7.5)
515=engine(83,54,46)
551=enine(54,98,34.5)
553=pitch(0,-48,33)
586=aoa(0)and i now have this ini-file:
Code:
[MISC]
cog=67.5
telemetry=1
[TEXTURE_LIST]
TEX_1=Contrail1
TEX_2=Contrail2
TEX_3=WEx
TEX_4=WEx2
[PARTICLESTREAM_1]
NAME=SRBsm
TEX=Contrail1
SRCSIZE=3
SRCRATE=150
V0=140.0
SRCSPREAD=0.3
LIFETIME=15
GROWTHRATE=5
ATMSLOWDOWN=1.0
LTYPE=DIFFUSE
LEVELMAP=LVL_PSQRT
LMIN=0
LMAX=1
ATMSMAP=ATM_PLOG
AMIN=1e-4
AMAX=2
[PARTICLESTREAM_2]
NAME=SRBex
TEX=Contrail2
SRCSIZE=1.8
SRCRATE=2000.0
V0=100.0
SRCSPREAD=0.0
LIFETIME=1
GROWTHRATE=18
ATMSLOWDOWN=0.0
LTYPE=EMISSIVE
LEVELMAP=LVL_PSQRT
LMIN=0
LMAX=0
ATMSMAP=ATM_PLOG
AMIN=1e-4
AMAX=1
[STAGE_1]
MeshName="Ariane6JM\A6_E1"
off=(0,0,2.8)
Height=15.7
Diameter=15
EmptyMass=115000
FuelMass=2450000.0
Thrust=800000000.0
BurnTime=91.9
ENG_1=(0,0,-24.5)
ENG_2=(3.5,0,-24.5)
ENG_3=(-3.5,0,-24.5)
ENG_4=(0,3.5,-24.5)
ENG_5=(0,-3.5,-24.5)
ENG_TEX=WEx
ROT_SPEED=0
[STAGE_2]
MeshName="Ariane6JM\A6_E2"
IGNITE_DELAY=5
off=(0,0,42.1)
Height=11.2
Diameter=15
EmptyMass=115000
FuelMass=1640000
Thrust=500000000
BurnTime=82
ENG_1=(-2,0,-12.5)
ENG_2=(2,0,-12.5)
ENG_3=(0,-2,-12.5)
ENG_4=(0,2,-12.5)
ENG_TEX=WEx
ROT_SPEED=0
SPEED=2.5
[STAGE_3]
MeshName="Ariane6JM\A6_E2"
IGNITE_DELAY=5
off=(0,0,42.1)
Height=5
Diameter=11.2
EmptyMass=115000
FuelMass=1640000
Thrust=500000000
BurnTime=49.2
ENG_1=(-2,0,-12.5)
ENG_2=(2,0,-12.5)
ENG_3=(0,-2,-12.5)
ENG_4=(0,2,-12.5)
ENG_TEX=WEx
ROT_SPEED=0
SPEED=2.5
[STAGE_4]
MeshName="Ariane6JM\A6_E2"
IGNITE_DELAY=5
off=(0,0,42.1)
Height=5
Diameter=11.2
EmptyMass=115000
FuelMass=1640000
Thrust=500000000
BurnTime=49.2
ENG_1=(-2,0,-12.5)
ENG_2=(2,0,-12.5)
ENG_3=(0,-2,-12.5)
ENG_4=(0,2,-12.5)
ENG_TEX=WEx
ROT_SPEED=0
SPEED=2.5
[STAGE_5]
MeshName="Ariane6JM\A6_E2"
IGNITE_DELAY=5
off=(0,0,42.1)
Height=5
Diameter=11.2
EmptyMass=115000
FuelMass=1640000
Thrust=500000000
BurnTime=49.2
ENG_1=(-2,0,-12.5)
ENG_2=(2,0,-12.5)
ENG_3=(0,-2,-12.5)
ENG_4=(0,2,-12.5)
ENG_TEX=WEx
ROT_SPEED=0
SPEED=2.5
[STAGE_6]
MeshName="Ariane6JM\A6_E2"
IGNITE_DELAY=5
off=(0,0,42.1)
Height=5
Diameter=11.2
EmptyMass=115000
FuelMass=1640000
Thrust=500000000
BurnTime=49.2
ENG_1=(-2,0,-12.5)
ENG_2=(2,0,-12.5)
ENG_3=(0,-2,-12.5)
ENG_4=(0,2,-12.5)
ENG_TEX=WEx
ROT_SPEED=0
SPEED=2.5
[STAGE_7]
MeshName="Ariane6JM\A6_E2"
IGNITE_DELAY=5
off=(0,0,42.1)
Height=11.2
Diameter=15
EmptyMass=115000
FuelMass=1640000
Thrust=500000000
BurnTime=49.2
ENG_1=(-2,0,-12.5)
ENG_2=(2,0,-12.5)
ENG_3=(0,-2,-12.5)
ENG_4=(0,2,-12.5)
ENG_TEX=WEx
ROT_SPEED=0
SPEED=2.5
[STAGE_8]
MeshName="Ariane6JM\A6_E2"
IGNITE_DELAY=5
off=(0,0,42.1)
Height=10.3
Diameter=15
EmptyMass=20000
FuelMass=20000
Thrust=500000000
BurnTime=0.6
ENG_1=(-2,0,-12.5)
ENG_2=(2,0,-12.5)
ENG_3=(0,-2,-12.5)
ENG_4=(0,2,-12.5)
ENG_TEX=WEx
ROT_SPEED=0
SPEED=2.5
[PAYLOAD_1]
off=(0.0,0,67)
MeshName="A6_Modules\Hera"
Module="spacecraft/spacecraft3"
name="Lander"
Diameter=22
Height=15.
Mass=1750000.and this scn.-file:
Code:
BEGIN_DESC
ready for the way to mars! press p in 100 seconds
END_DESC
BEGIN_ENVIRONMENT
System Sol
Date MJD 53736.7481941114
END_ENVIRONMENT
BEGIN_FOCUS
Ship MARS
END_FOCUS
BEGIN_CAMERA
TARGET MARS
MODE Extern
POS 5.24 -128.16 -84.87
TRACKMODE GlobalFrame
FOV 40.00
END_CAMERA
BEGIN_HUD
TYPE Surface
END_HUD
BEGIN_MFD Left
TYPE Surface
SPDMODE 1
END_MFD
BEGIN_MFD Right
TYPE Orbit
PROJ Ship
FRAME Ecliptic
ALT
REF Earth
END_MFD
BEGIN_SHIPS
MARS:marsatonce\marslauncher
STATUS Landed Earth
POS -52.5799820 5.0617590
HEADING -990.00
PRPLEVEL 0:1.000 1:1.000 2:1.000 3:1.000 4:1.000 5:1.000 6:1000
NAVFREQ 0 0
CONFIG_FILE Config\marsatonce\marslauncher
GUIDANCE_FILE Config\marsatonce\marslauncher
CONFIGURATION 0
STAGE_STATE 2
STAGE_IGNITION_TIME 0.000
CURRENT_STAGE 1
CURRENT_INTERSTAGE 1
CURRENT_PAYLOAD 1
END
END_SHIPSAnd yes - the multistage-ini-file is a changed version of the A6JM-Add-on and the mesh will look strange... - that's cause I didn't want to create the whole new file and I don't care about strange mesh, etc... I just wanted to make a video of it and copy it together with a solidworks-rendering, so the mesh is no problem - but when I nw start the scenario it ctd's...
So since I' a noobat multistage2 I would now need help - could omeone find the mistake and correct it for me -sincee i already tried to find it for overr an hour and I didn't...
I would be grateful for any helpful answers,
greetings:tiphat:, HAL9001
Last edited:
