Search results

  1. T

    Apollo 8 - NASSP v1858 - optics issues or my mistakes?

    thanks for these nice technical updates Indy, anyway I splashdown and I am happy to report back to the team that my A8 mission was "smooth" for what concerns all MCCs uplinks and checklists steps...now I just uploaded the new version 1870 and started again A11, but his is another story :salute:
  2. T

    Apollo 8 - NASSP v1858 - optics issues or my mistakes?

    Hi, sorry ... I didn't know this issues was well know, I found an old treat looking around ... so ok, I did the P06 CMC standby procedure followed by the setting of the DRIFT and REFSMMAT flags as indicated, and now everything works, I just made the MCC-5 burn and all stars were according the...
  3. T

    Apollo 8 - NASSP v1858 - optics issues or my mistakes?

    Hi to all, I started Apollo 8 again from scratch using NASSP 1858 to enjoy P22s while in lunar orbit to get more acquainted with moon landing marks without stress due to the LM :) , all went well until MCC-5 when I got the ENTRY REFSMMAT and I was supposed to do P52 REFSMMAT at approx 103h GET...
  4. T

    Shuttle FDO MFD

    Hi Indy, Thanks for the hints. I tried now to launch from the default scenario “Launch test” arriving into orbit. I set up the EXE page with the lift off time and set Atlantis as TARGET (photo 1); you see I am at about 15min MET and the TTA is approx. 30min ahead, so I wanted to set a...
  5. T

    Project Soyuz 7K-T Custom

    Hallo "diogom", nice to see your new update. I would like to ask you something about the rendezvous sequence ... I still didn't fly a full rendezvous, but i was curious to try the default scenery when the Soyuz is already docked. If I correctly understood your pdf, the Soyuz was capable to do...
  6. T

    Shuttle FDO MFD

    Hi Indy, Hi Urwume, and others... Not sure if this treat is still “alive” but I will dear to ask anyway. I know SSU development was halted, but I managed to get the version 3285 up and running and I also downloaded the “Shuttle FDO MFD” from Indy, not sure if I got the last version of SSU...
  7. T

    Apollo 10 with NASSP 8 beta rev 1822_issues

    Hi, just splashdown ....:cheers: I really enjoyed A10, it allowed me to practicing the LM without too much stress as in A11 or A9 (with complications derived by the atmospheric drag); the views of the moon landing and landmark sites during all P22's were very nice .... before to move on I will...
  8. T

    Apollo 10 with NASSP 8 beta rev 1822_issues

    Sorry "rcfly..." to call you "RCS" ---- ahhhhhhh NASSP is really in my head ........ :p ------- wife getting angry......
  9. T

    Apollo 10 with NASSP 8 beta rev 1822_issues

    Hi, Indy and RCS... about the DVs I got in MCC-1: 1st time I got: V06 81 +00002, -00010, -00023 V06 59 +00017, -00010, -00015 N85 don’t remember, didn’t wrote down. 2nd time I got: V06 81 +00002, -00010, -00023 V06 59 +00017, -00010, -00015 I got the F 50 18, upon ENTER I got V16 85...
  10. T

    Apollo 10 with NASSP 8 beta rev 1822_issues

    Hi thanks for the fast reply. In the scenarios: situation at about TPI +8m waiting to see +12:00 on the DSKY to hit PRO ... note: once i got the next mark at about +11:33 and so I hit PRO (when the COMP ACTY lt was off or blinking) ... and I got the 1703 alarm later on; next i tried to wait...
  11. T

    Apollo 10 with NASSP 8 beta rev 1822_issues

    Hi sorry to be back again. I tried all over again from CSI, CDH, TPI and TPM. Q1) For MCC1 I waited until the TPI+12m mark before to hit PRO …but it took more than 2 mins to give out the answers so by the time I got to P41 I got the same “TIG skipped alarm”. As I was following the progresses...
  12. T

    Apollo 10 with NASSP 8 beta rev 1822_issues

    Hi, I started from the “Apollo 10 - 14 - Before CSI TIG-6min” scenario to practice again the rendezvous…I managed the CSI, CDH, TPI and I am on my way to the 1st MCC with P35, but I always get the 1706 alarm … as apparently I am always too late to call up P41. But something is not clear: the...
  13. T

    Apollo 10 with NASSP 8 beta rev 1822_issues

    ahahahah...as simple as that....run out of propellant ... ok so need to be more conscious about them....i will try to improve. i started from undocking with full tanks so i guess i was not careful enough....never mind, I will re-do all over again practice will help to sort it out. thanks
  14. T

    Apollo 10 with NASSP 8 beta rev 1822_issues

    Sorry I am still back with some new issues… 1) With reference to photo 1 taken at the end of the CSI burn, at approx. 103:40:00, I noticed that I got a red flag on top of the THRUST indicator; and it there also when I did the CDH burn, at approx. 104:40:00, see photo 2. Is normal at this time...
  15. T

    Apollo 10 with NASSP 8 beta rev 1822_issues

    thanks Indy. q1) so I did indeed wrong .... if I read -0.3 fps doing V90 in the LM I should have entered +0.3 in N81 .... q3) AHHHHHHHHHH...forgot the SVs as of cousre all CSM activities were not done ... I will just try once to uplinks the SVs via RTCC and call up V83E and check ...
  16. T

    Apollo 10 with NASSP 8 beta rev 1822_issues

    Hi, managed to get P32 working and I did the CSI burn and now proceeding for P33 and CDH burn; but I guess I did something stupid again so please allow me to ask for clarity. Q1) about V90 “Out of plane display” – I called V90E (in the LM computer) and read out the Y-dot velocity, in my case...
  17. T

    Apollo 10 with NASSP 8 beta rev 1822_issues

    thank you very much ... ok i will do as you suggested, and happy to see it was just a silly error, thank for your time, and the doc in the link you provided it is really nice, just started reading and already found some answers, tomorrow at office i will print it out and study before to proceed...
  18. T

    Apollo 10 with NASSP 8 beta rev 1822_issues

    thank you for helping .... in the zp the scenario with the alarm 604 is the one when I put the TPI time at 105:18:30 (10 min later; sorry the 1st time I got 604 i didn't save it); the other is when I need to start P32 ... the PAD are available by "5" in the MCC menu.... but, GENRALLY speaking...
  19. T

    Apollo 10 with NASSP 8 beta rev 1822_issues

    Hi Indy, thank you. I now arrive to the moment to run P32 for CSI and I managed somehow P20, RR lock on and Marks...thanks for the valuable inputs (V06 N49 never shown up again so far). Now I got the CSI PADs with the CSI and TPI TIGs (photo 1). I run P32, entered the PAD CSI and TPI TIG times...
  20. T

    Apollo 10 with NASSP 8 beta rev 1822_issues

    Hi, I managed to arrive to the moment when I got the P30 LM INSERTION Pads…before move on with the rendezvous part, I would like ask for some help. Q1) I saw that P20 was already working in the background when asked to do P30 to load the insertion PAD, but before that I got a 06 49 display...
Back
Top