Problem Help with Multistage develop

0rbiter X

New member
Joined
Nov 14, 2017
Messages
26
Reaction score
1
Points
3
Hello folks,
Somebody can show me the config files texts to make a 3-stage rocket with fred18's - 'MULTISTAGE2015-for Orbiter 2010P1' from the beggining?

I already have the meshes, but I unable to make the vessel work, not even the meshes show up in the scenario.
I need the codes to INI files (parameters and with mesh it will be), the meshes and a scenario file... Its tha all? It have some pre require add-on that I missed?

Thanks to anyone who can help
 

bestwork1989

New member
Joined
Oct 22, 2020
Messages
1
Reaction score
0
Points
1
Location
India
Hello folks,
Somebody can show me the config files texts to make a 3-stage rocket with fred18's - 'MULTISTAGE2015-for Orbiter 2010P1' from the beggining?

I already have the meshes, but I unable to make the vessel work, not even the meshes show up in the scenario.
I need the codes to INI files (parameters and with mesh it will be), the meshes and a scenario file... Its tha all? It have some pre require add-on that I missed?

Thanks to anyone who can help
Hi
you are talking about the config files texts to make a 3-stage rocket with fred18's - 'MULTISTAGE2015-for Orbiter 2010P1' from the beginning. I am a novice in this, so I have no pre require add-on this. but I suggest you if you plan baby steps and more search on google may help you.


The Super Red Supergiant Star - UY Scuti, 1708 ± 192 Solar Radii, the biggest known star in the Universe UY Scuti.
[url = http://blogmedia.tech/uyscuti.html] UY SCUTI [/url]
 
Last edited:

0rbiter X

New member
Joined
Nov 14, 2017
Messages
26
Reaction score
1
Points
3
bestwork1989, thaks... I will take a look.

gattispilot, how I can acess the log?? and follows the ini below: (I use a SLS original codes and replace by the models that I make... there are no need to adapters, so I erase these parts, but did not work anyway. Sorry for the possible newbie mistakes that must be in the codes below)


[MISC]
cog=30.500
GNC_Debug=0
Telemetry=0
Focus=0
Thrust_real_pos=0
Vertical_Angle=0.000

[TEXTURE_LIST]
TEX_1=Exhaust_atsme

[PARTICLESTREAM_1]
Name=vent
amin =0.150
amax =1.000
atmslowdown =3.000
growthrate =1.200
lifetime =4.500
lmax =0.500
lmin =0.000
srcrate =15.000
srcsize =0.400
v0 =1.000
ltype =EMISSIVE
atmsmap =ATM_FLAT
levelmap =LVL_PSQRT
tex =contrail
Srcspread=0.000

[PARTICLESTREAM_2]
NAME=mach
SRCSIZE=7.000
SRCRATE=120.000
V0=12.000
SRCSPREAD=0.000
LIFETIME=0.250
GROWTHRATE=6.000
ATMSLOWDOWN=0.000
LTYPE=EMISSIVE
LEVELMAP=LVL_PSQRT
LMIN=0.000
LMAX=4.000
ATMSMAP=ATM_FLAT
AMIN=0.600
AMAX=1.000
TEX=contrail4

[FX_VENT]
pstream=vent
off_1=(4.200,0.000,35.000)
dir_1=(1.000,0.000,0.000)
time_fin_1=-15.000
off_2=(0.000,4.200,15.000)
dir_2=(0.000,1.000,0.000)
time_fin_2=-25.000

[FX_MACH]
pstream=mach
mach_min=0.900
mach_max=1.100
off_1=(0.000,0.000,70.000)
off_2=(6.777,0.000,20.000)
off_3=(-6.777,0.000,20.000)
dir=(0.000,0.000,-1.000)


[STAGE_1]
Height=63.720
Diameter=8.400
EmptyMass=51944.392
FuelMass=1101259.734
Thrust=10898383.375
BurnTime=449.000
off=(0.000,0.000,4.700)
MeshName=Montenegro-1st-ST
eng_1=(0.,0,-32.408)
eng_diameter=2.700
PITCHTHRUST=56774532.400
YAWTHRUST=56774532.400
speed=(0.000,0.000,-10.000)
ENG_PSTREAM1=
battery=1.500
Reignitable=0
Eng_tex=
Eng_pstream2=
Eng_dir=(0.000,0.000,1.000)
Module=Stage
Rot_speed=(0.000,0.000,0.000)

[SEPARATION_12]
MeshName="SLS\interstage"
SEPARATION_DELAY=15.0
Diameter=8.4
Height=5.0
EmptyMass=5650.32
off=(0.,0.,42.1027)

[STAGE_2]
MeshName=Montenegro-2nd-ST
Diameter=8.400
Height=13.700
EmptyMass=13883.576
FuelMass=273420.730
Thrust=3921000.000
BurnTime=306.500
ignite_delay=10.000
off=(0.000,0.000,47.876)
eng_1=(0,-1.3499,-12.5)
eng_2=(1.264,0.687,-12.5)
eng_3=(-1.264,0.687,-12.5)
eng_diameter=2.700
PITCHTHRUST=4663990.000
YAWTHRUST=4663990.000
battery=5.000
ullage_thrust=100000.000
ullage_N=4
ullage_angle=-22.500
ullage_pos=(4.200,0.000,-10.700)
ullage_dir=(0.200,0.000,-1.000)
ullage_tex=Exhaust_atsme
ullage_length=5.000
ullage_diameter=1.000
ullage_anticipation=3.000
ullage_overlap=1.000
ullage_rectfactor=3.000
reignitable=1
Linearthrust=500000.000
Eng_tex=
Eng_pstream1=
Eng_pstream2=
Eng_dir=(0.000,0.000,1.000)
Module=Stage
Speed=(0.000,0.000,0.000)
Rot_speed=(0.000,0.000,0.000)

[FAIRING]
N=2
MeshName="Montenegro Nose RH"
Diameter=10
Height=31.35
angle=0.
off=(0,0.,73.695)
EMPTYMASS=10683.0145
speed=(25,0,0)
Rot_speed(0,0.3,0)

[PAYLOAD_1]
MeshName="SLS\deadweight"
off=(0,0,68.695)
Diameter=8
Height=20
MASS=130000
Module="spacecraft\spacecraft3"
Name=Deadweight
SPEED=(0,0,2)
RENDER=1

[PAYLOAD_2]
MeshName="SLS\adapter"
off=(0,0,58.695)
Diameter=8
Height=20
MASS=200
Module="spacecraft\spacecraft3"
Name=Adapter
SPEED=(0,0,2)
RENDER=1
[FX_LAUNCH]
N=2
Height=0.500
Angle=90.000
Distance=10.000
CutoffAltitude=150.000
Pstream1=flametrench
Pstream2=

[PARTICLESTREAM_3]
Name=flametrench
Srcsize=11.000
Srcrate=15.000
V0=100.000
Srcspread=0.000
Lifetime=10.000
Growthrate=15.000
Atmslowdown=0.500
Ltype=EMISSIVE
Levelmap=LVL_PSQRT
Lmin=0.000
Lmax=0.500
Atmsmap=ATM_FLAT
Amin=1.000
Amax=1.000
Tex=contrail



The "Montenegro" rocket that appears in some codes have the respective meshes.
So I have the Ini codes and the meshes. Is there anything else besides that i'm missing?

Thanks!
 

gattispilot

Addon Developer
Addon Developer
Joined
Oct 17, 2007
Messages
6,056
Reaction score
403
Points
158
Location
Dallas, TX
bestwork1989, thaks... I will take a look.

gattispilot, how I can acess the log?? and follows the ini below: (I use a SLS original codes and replace by the models that I make... there are no need to adapters, so I erase these parts, but did not work anyway. Sorry for the possible newbie mistakes that must be in the codes below)


[MISC]
cog=30.500
GNC_Debug=0
Telemetry=0
Focus=0
Thrust_real_pos=0
Vertical_Angle=0.000

[TEXTURE_LIST]
TEX_1=Exhaust_atsme

[PARTICLESTREAM_1]
Name=vent
amin =0.150
amax =1.000
atmslowdown =3.000
growthrate =1.200
lifetime =4.500
lmax =0.500
lmin =0.000
srcrate =15.000
srcsize =0.400
v0 =1.000
ltype =EMISSIVE
atmsmap =ATM_FLAT
levelmap =LVL_PSQRT
tex =contrail
Srcspread=0.000

[PARTICLESTREAM_2]
NAME=mach
SRCSIZE=7.000
SRCRATE=120.000
V0=12.000
SRCSPREAD=0.000
LIFETIME=0.250
GROWTHRATE=6.000
ATMSLOWDOWN=0.000
LTYPE=EMISSIVE
LEVELMAP=LVL_PSQRT
LMIN=0.000
LMAX=4.000
ATMSMAP=ATM_FLAT
AMIN=0.600
AMAX=1.000
TEX=contrail4

[FX_VENT]
pstream=vent
off_1=(4.200,0.000,35.000)
dir_1=(1.000,0.000,0.000)
time_fin_1=-15.000
off_2=(0.000,4.200,15.000)
dir_2=(0.000,1.000,0.000)
time_fin_2=-25.000

[FX_MACH]
pstream=mach
mach_min=0.900
mach_max=1.100
off_1=(0.000,0.000,70.000)
off_2=(6.777,0.000,20.000)
off_3=(-6.777,0.000,20.000)
dir=(0.000,0.000,-1.000)


[STAGE_1]
Height=63.720
Diameter=8.400
EmptyMass=51944.392
FuelMass=1101259.734
Thrust=10898383.375
BurnTime=449.000
off=(0.000,0.000,4.700)
MeshName=Montenegro-1st-ST
eng_1=(0.,0,-32.408)
eng_diameter=2.700
PITCHTHRUST=56774532.400
YAWTHRUST=56774532.400
speed=(0.000,0.000,-10.000)
ENG_PSTREAM1=
battery=1.500
Reignitable=0
Eng_tex=
Eng_pstream2=
Eng_dir=(0.000,0.000,1.000)
Module=Stage
Rot_speed=(0.000,0.000,0.000)

[SEPARATION_12]
MeshName="SLS\interstage"
SEPARATION_DELAY=15.0
Diameter=8.4
Height=5.0
EmptyMass=5650.32
off=(0.,0.,42.1027)

[STAGE_2]
MeshName=Montenegro-2nd-ST
Diameter=8.400
Height=13.700
EmptyMass=13883.576
FuelMass=273420.730
Thrust=3921000.000
BurnTime=306.500
ignite_delay=10.000
off=(0.000,0.000,47.876)
eng_1=(0,-1.3499,-12.5)
eng_2=(1.264,0.687,-12.5)
eng_3=(-1.264,0.687,-12.5)
eng_diameter=2.700
PITCHTHRUST=4663990.000
YAWTHRUST=4663990.000
battery=5.000
ullage_thrust=100000.000
ullage_N=4
ullage_angle=-22.500
ullage_pos=(4.200,0.000,-10.700)
ullage_dir=(0.200,0.000,-1.000)
ullage_tex=Exhaust_atsme
ullage_length=5.000
ullage_diameter=1.000
ullage_anticipation=3.000
ullage_overlap=1.000
ullage_rectfactor=3.000
reignitable=1
Linearthrust=500000.000
Eng_tex=
Eng_pstream1=
Eng_pstream2=
Eng_dir=(0.000,0.000,1.000)
Module=Stage
Speed=(0.000,0.000,0.000)
Rot_speed=(0.000,0.000,0.000)

[FAIRING]
N=2
MeshName="Montenegro Nose RH"
Diameter=10
Height=31.35
angle=0.
off=(0,0.,73.695)
EMPTYMASS=10683.0145
speed=(25,0,0)
Rot_speed(0,0.3,0)

[PAYLOAD_1]
MeshName="SLS\deadweight"
off=(0,0,68.695)
Diameter=8
Height=20
MASS=130000
Module="spacecraft\spacecraft3"
Name=Deadweight
SPEED=(0,0,2)
RENDER=1

[PAYLOAD_2]
MeshName="SLS\adapter"
off=(0,0,58.695)
Diameter=8
Height=20
MASS=200
Module="spacecraft\spacecraft3"
Name=Adapter
SPEED=(0,0,2)
RENDER=1
[FX_LAUNCH]
N=2
Height=0.500
Angle=90.000
Distance=10.000
CutoffAltitude=150.000
Pstream1=flametrench
Pstream2=

[PARTICLESTREAM_3]
Name=flametrench
Srcsize=11.000
Srcrate=15.000
V0=100.000
Srcspread=0.000
Lifetime=10.000
Growthrate=15.000
Atmslowdown=0.500
Ltype=EMISSIVE
Levelmap=LVL_PSQRT
Lmin=0.000
Lmax=0.500
Atmsmap=ATM_FLAT
Amin=1.000
Amax=1.000
Tex=contrail



The "Montenegro" rocket that appears in some codes have the respective meshes.
So I have the Ini codes and the meshes. Is there anything else besides that i'm missing?

Thanks!
The orbiterlog.txt is in the main orbiter folder. It will tell you what meshes, textures you are missing. maybe any ini missing.

If you want send me what you have:[email protected]. I will take a look
 
Top