Project Space Transportation System 2016

gattispilot · May 30, 2022

Thanks. Which scenario are you using?

Ericman832 · May 30, 2022

D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
============================ ERROR: ===========================
Parse error from base definition file for Cape Canaveral: Block: TEXn: expected 3 values (*char, scalar, scalar)
[BaseObject:

arseError | .\Baseobj.cpp | 184]
===============================================================
============================ ERROR: ===========================
Parse error from base definition file for Cape Canaveral: Block: TEXn: expected 3 values (*char, scalar, scalar)
[BaseObject:

arseError | .\Baseobj.cpp | 184]
===============================================================
000000.000: BaseObject: Parse error 2
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
============================ ERROR: ===========================
Parse error from base definition file for Cape Canaveral: Block: TEXn: expected 3 values (*char, scalar, scalar)
[BaseObject:

arseError | .\Baseobj.cpp | 184]
===============================================================
============================ ERROR: ===========================
Parse error from base definition file for Cape Canaveral: Block: TEXn: expected 3 values (*char, scalar, scalar)
[BaseObject:

arseError | .\Baseobj.cpp | 184]
===============================================================
000000.000: BaseObject: Parse error 2
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
============================ ERROR: ===========================
Parse error from base definition file for EDW - Edwards AFB: Block: TEXn: expected 3 values (*char, scalar, scalar)
[BaseObject:

arseError | .\Baseobj.cpp | 184]
===============================================================
============================ ERROR: ===========================
Parse error from base definition file for EDW - Edwards AFB: Block: TEXn: expected 3 values (*char, scalar, scalar)
[BaseObject:

arseError | .\Baseobj.cpp | 184]
===============================================================
000000.000: BaseObject: Parse error 2
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
============================ ERROR: ===========================
Parse error from base definition file for ZZA - Zaragoza: Block: TEXn: expected 3 values (*char, scalar, scalar)
[BaseObject:

arseError | .\Baseobj.cpp | 184]
===============================================================
============================ ERROR: ===========================
Parse error from base definition file for ZZA - Zaragoza: Block: TEXn: expected 3 values (*char, scalar, scalar)
[BaseObject:

arseError | .\Baseobj.cpp | 184]
===============================================================
000000.000: BaseObject: Parse error 2
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module Moon.dll .............. [Build 160828, API 160828]
ELP82: Precision 1e-005, Terms 116/829
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module Mars.dll .............. [Build 160828, API 160828]
000000.000: Module MarsAtm2006.dll ....... [Build 160828, API 160828]
VSOP87(B) Mars: Precision 1e-005, Terms 405/6400
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module Phobos.dll ............ [Build ******, API 060425]
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module Deimos.dll ............ [Build ******, API 060425]
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module Galsat.dll ............ [Build 160828, API 160828]
000000.000: Module Jupiter.dll ........... [Build 160828, API 160828]
VSOP87(B) Jupiter: Precision 1e-006, Terms 1624/3625
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module Io.dll ................ [Build 160828, API 160828]
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module Europa.dll ............ [Build 160828, API 160828]
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module Ganymede.dll .......... [Build 160828, API 160828]
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module Callisto.dll .......... [Build 160828, API 160828]
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module Satsat.dll ............ [Build 160828, API 160828]
000000.000: Module Saturn.dll ............ [Build 160828, API 160828]
VSOP87(B) Saturn: Precision 1e-006, Terms 2904/6365
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module Mimas.dll ............. [Build 160828, API 160828]
SATSAT Mimas: Terms 113
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module Enceladus.dll ......... [Build 160828, API 160828]
SATSAT Enceladus: Terms 33
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module Tethys.dll ............ [Build 160828, API 160828]
SATSAT Tethys: Terms 101
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module Dione.dll ............. [Build 160828, API 160828]
SATSAT Dione: Terms 59
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module Rhea.dll .............. [Build 160828, API 160828]
SATSAT Rhea: Terms 68
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module Titan.dll ............. [Build 160828, API 160828]
SATSAT Titan: Terms 100
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module Iapetus.dll ........... [Build 160828, API 160828]
SATSAT Iapetus: Terms 605
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module Uranus.dll ............ [Build 160828, API 160828]
VSOP87(B) Uranus: Precision 1e-006, Terms 1827/5269
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module Miranda.dll ........... [Build ******, API 060425]
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module Ariel.dll ............. [Build ******, API 060425]
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module Umbriel.dll ........... [Build ******, API 060425]
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module Titania.dll ........... [Build ******, API 060425]
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module Oberon.dll ............ [Build ******, API 060425]
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module Neptune.dll ........... [Build 160828, API 160828]
VSOP87(B) Neptune: Precision 1e-006, Terms 391/2024
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Finished initialising world
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module Shuttle.dll ........... [Build 120107, API 100830]
000000.000: ---------------------------------------------------------------
000000.000: >>> WARNING: Obsolete API function used: VESSEL::CreateVariableDragElement
000000.000: At least one active module is accessing an obsolete interface function.
000000.000: Addons which rely on obsolete functions may not be compatible with
000000.000: future versions of Orbiter.
000000.000: ---------------------------------------------------------------
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module PBLights.dll .......... [Build 111222, API 100830]
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module LC39A-1981.dll ........ [Build 100905, API 100830]
D3D9: ERROR: D3D9Client.cpp Line:3112 Error:-2005530516 pDevice->StretchRect(pTextScreen, NULL, pBackBuffer, &txt, D3DTEXF_POINT)
000000.000: Module LC39B-NLP-1981.dll .... [Build 100905, API 100830]
000000.000: Finished initialising status
000000.000: Finished initialising camera
000000.000: Finished setting up render state
000000.000: D3D9: [Scene Initialized]
000000.000: Finished initialising panels
part 3/3

Ericman832 · May 30, 2022

gattispilot said:
Thanks. Which scenario are you using?

LC39 A/B HD

gattispilot · May 30, 2022

ok. The HD launches requires more stuff. Lets try a simple one. lets try an orbit one?

Ericman832 · May 30, 2022

ya idk what to use now

gattispilot · May 30, 2022

Scenarios\SpaceTransportationSystem2016\Fictional Scenarios\EnterpriseLaunch

gattispilot · May 31, 2022

Any issues?

I am working on ST 69. Which had the Spartan and WSF. There was several eva devices tested. They may be just meshes. I found this which went in the aft of the bay

Ericman832 · May 31, 2022

gattispilot said:
Scenarios\SpaceTransportationSystem2016\Fictional Scenarios\EnterpriseLaunch

I’ll use that on Friday right now I have school in the next late hour

gattispilot · Jun 1, 2022

STS69 cargo bay

in front of the Spartan is an EVA task board.

Gargantua2024 · Jun 1, 2022

The detail of each lesser-known shuttle missions are astounding as always!

:hailprobe:

gattispilot · Jun 1, 2022

Thanks.
Here is what the EVA task board will look like.

There is a cover that I think I will have the eva guy remove. Not sure if the other parts are doable. I may just make the parts part of the mesh and not separate vessels.

gattispilot · Jun 2, 2022

STS 69 eva task board and Adapter plate.

On the adapter plate a PFR device attached. Also on the the Task board a Thermal cube attached.

Ericman832 · Jun 3, 2022

gattispilot said:
Scenarios\SpaceTransportationSystem2016\Fictional Scenarios\EnterpriseLaunch

Couldn't find the scenario. The only on i have is sts 8 which doesnt work

gattispilot · Jun 3, 2022

Ok. Try just adding the shuttle using the scenario editor

Ericman832 · Jun 3, 2022

i cant i dont know how to i guess the problem cant be solved with this addon? i tried my very best and added the addons and it doesnt work!
the moment i tried to load the scenario this is the problem

**** Orbiter.log
000000.000: Build Aug 28 2016 [v.160828]
000000.000: Timer precision: 1e-007 sec
000000.000: Found 0 joystick(s)
000000.000: Devices enumerated: 6
000000.000: Devices accepted: 5
000000.000: [ ] RGB Emulation (SW)
000000.000: [ ] Direct3D HAL (HW)
000000.000: [x] Direct3D T&L HAL (HW)
000000.000: [ ] Direct3D HAL (Intel(R) UHD Graphics) (HW)
000000.000: [x] Direct3D T&L HAL (Intel(R) UHD Graphics) (HW)
000000.000: Module AtlantisConfig.dll .... [Build 160828, API 160828]
000000.000: Module AtmConfig.dll ......... [Build 160828, API 160828]
000000.000: Module DGConfigurator.dll .... [Build 160828, API 160828]
000000.000: Module OrbiterSound.dll ...... [Build 200811, API 160828]
000000.000: Module ScnEditor.dll ......... [Build 160828, API 160828]
000000.000: Module FlightData.dll ........ [Build 160828, API 160828]
000000.000: Module LuaConsole.dll ........ [Build 160828, API 160828]
000000.000: Module ScriptMFD.dll ......... [Build 160828, API 160828]
000000.000: Module LuaMFD.dll ............ [Build 160828, API 160828]
000000.000: Module CustomMFD.dll ......... [Build 160828, API 160828]
000000.000: Module transx.dll ............ [Build 160216, API 160214]
000000.000: Module TrackIR.dll ........... [Build 160828, API 160828]
000000.000: TrackIR module not found.
000000.000: Module Meshdebug.dll ......... [Build 160828, API 160828]
000000.000: Module Framerate.dll ......... [Build 160828, API 160828]
000000.000: Module ExtMFD.dll ............ [Build 160828, API 160828]
000000.000: Module Rcontrol.dll .......... [Build 160828, API 160828]
000000.000: Module AutoFCS.dll ........... [Build ******, API 050206]
000000.000: Module AutoFCS-STS.dll ....... [Build ******, API 050206]
000000.000: Module AttitudeMFD.dll ....... [Build ******, API 050206]
000000.000: ---------------------------------------------------------------
000000.000: >>> WARNING: Obsolete API function used: oapiRegisterMFDMode
000000.000: At least one active module is accessing an obsolete interface function.
000000.000: Addons which rely on obsolete functions may not be compatible with
000000.000: future versions of Orbiter.
000000.000: ---------------------------------------------------------------
000000.000: Module Multistage2015_MFD.dll [Build 170506, API 160828]
000000.000: Module DX9ExtMFD.dll ......... [Build 210805, API 160828]
000000.000:
000000.000: **** Creating simulation session
000000.000: DirectDraw interface OK
000000.000: Direct3D interface OK
000000.000: Graphics: Viewport: Window 1360 x 739 x 32
000000.000: Graphics: Hardware T&L capability: Yes
000000.000: Graphics: Z-buffer depth: 32 bit
000000.000: Graphics: Active lights supported: 8
000000.000: Loading 15382 records from star database
000000.000: ---------------------------------------------------------------
000000.000: >>> ERROR: DDraw error DDERR_BLTFASTCANTCLIP
000000.000: >>> [OrbiterGraphics::clbkBlt | .\OGraphics.cpp | 1633]
000000.000: ---------------------------------------------------------------
============================ ERROR: ===========================
While initialising solar system Sol_shuttlehd:

>> File not found: .\Config\Sol_shuttlehd.cfg

Click to expand...

[Orbiter::CreateRenderWindow | .\Orbiter.cpp | 756]
===============================================================
000000.000: >>> TERMINATING <<<

gattispilot · Jun 3, 2022

Sorry,

Which scenario?

So lets check some things.

Try this attached scenario


BEGIN_DESC
Start the Simulator with Constitution docked to the ISS.
END_DESC
BEGIN_ENVIRONMENT
System Sol
Date MJD 54539.0304054282
END_ENVIRONMENT
BEGIN_FOCUS
Ship ISS
END_FOCUS
BEGIN_CAMERA
TARGET ISS
MODE Extern
POS 2.543236 41.396482 35.605358
TRACKMODE TargetRelative
FOV 50.00
END_CAMERA
BEGIN_HUD
TYPE Docking
END_HUD
BEGIN_MFD Left
TYPE Docking
END_MFD
BEGIN_MFD Right
TYPE Map
REF Earth
END_MFD
BEGIN_VC
END_VC
BEGIN_SHIPS
ISS:ProjectAlpha_ISS
STATUS Orbiting Earth
RPOS 6604547.60 32785.98 -1288983.25
RVEL 431.660 -7419.871 2010.494
AROT 110.00 -10.00 80.00
PRPLEVEL 0:1.000
DOCKINFO 0:0,Constitution
NAVFREQ 0 0
XPDR 466
END
Constitution:Shuttle2016B
STATUS Orbiting Earth
RPOS 6604529.05 32796.63 -1288983.27
RVEL 431.660 -7419.871 2010.494
AROT -70.00 10.00 100.00
PRPLEVEL 0:0.708
DOCKINFO 0:0,ISS
NAVFREQ 544 0
CONFIGURATION 3
OV 106
RENDER
RMSARM
ODS
CARGODOOR 1 1.0000
KUBAND 1 1.0000
POSTLAND 0 0.0000
SSMES 1 1.0000
ADTA 0 0.0000
PETD 0 0.0000
SETD 0 0.0000
ARMTILT 1 1.0000 1 1.0000
PRADIATOR 0 0.0000
SRADIATOR 0 0.0000
GEAR 0 0.0000
PAYLOAD_MASS 0.0000
ARM_STATUS 0.5000 0.1122 0.0849 0.5000 0.5000 0.5000
SAT_OFS_X 0.000
SAT_OFS_Y 0.000
SAT_OFS_Z 0.000
PL1_OFS 0.0000 0 5
PL1_DIR 0.0000 1.0000 0.0000
PL1_ROT 0.0000 0.0000 1.0000
PL2_OFS 0.0000 6.2200 -7.7950
PL2_DIR 0.0000 1.0000 0.0000
PL2_ROT 1.0000 0.0000 0.0000
PL3_OFS -1.8500 8.0200 3.9550
PL3_DIR 0.0000 1.0000 0.0000
PL3_ROT 0.0000 0.0000 1.0000
PL4_OFS -2.2000 8.0200 -14.0450
PL4_DIR 0.0000 1.0000 0.0000
PL4_ROT 0.0000 0.0000 1.0000
PL5_OFS 2.2000 8.0200 -14.0450
PL5_DIR 0.0000 1.0000 0.0000
PL5_ROT 0.0000 0.0000 1.0000
PL6_OFS 1.8500 8.0200 3.9550
PL6_DIR 0.0000 1.0000 0.0000
PL6_ROT 0.0000 0.0000 1.0000
PL7_OFS 0.0000 6.2200 -7.7950
PL7_DIR 0.0000 1.0000 0.0000
PL7_ROT 0.0000 0.0000 1.0000
END
Leonardo:Leonardo_mplm
STATUS Orbiting Earth
ATTACHED 0:0,Constitution
END
END_SHIPS

gattispilot · Jun 3, 2022

More STS 69.

There was Thermal cube that attached to the PFR and to the Eva Task board. One last thing to build then STS 69 should be ready for testing and scenarios.

Ericman832 · Jun 4, 2022

After i reinstalled the same required addons I STILL cant get it to work

**** Orbiter.log
000000.000: Build Aug 28 2016 [v.160828]
000000.000: Timer precision: 1e-007 sec
000000.000: Found 0 joystick(s)
000000.000: Module AtlantisConfig.dll .... [Build 160828, API 160828]
000000.000: Module AtmConfig.dll ......... [Build 160828, API 160828]
000000.000: Module DGConfigurator.dll .... [Build 160828, API 160828]
000000.000: Module OrbiterSound.dll ...... [Build 200811, API 160828]
000000.000: Module ScnEditor.dll ......... [Build 160828, API 160828]
000000.000: Module Multistage2015_MFD.dll [Build 170506, API 160828]
000000.000: Module LuaConsole.dll ........ [Build 160828, API 160828]
000000.000: Module ScriptMFD.dll ......... [Build 160828, API 160828]
000000.000: Module Meshdebug.dll ......... [Build 160828, API 160828]
000000.000: Module TrackIR.dll ........... [Build 160828, API 160828]
000000.000: TrackIR module not found.
000000.000: Module CustomMFD.dll ......... [Build 160828, API 160828]
000000.000: Module LuaMFD.dll ............ [Build 160828, API 160828]
000000.000: Module transx.dll ............ [Build 160216, API 160214]
000000.000: Module ExtMFD.dll ............ [Build 160828, API 160828]
000000.000: Module FlightData.dll ........ [Build 160828, API 160828]
000000.000: Module Rcontrol.dll .......... [Build 160828, API 160828]
000000.000: Module Framerate.dll ......... [Build 160828, API 160828]
000000.000: ---------------------------------------------------------------
BaseDir : C:\Users\Christian\Downloads\Orbiter 2016 STS\
ConfigDir : C:\Users\Christian\Downloads\Orbiter 2016 STS\Config\
MeshDir : C:\Users\Christian\Downloads\Orbiter 2016 STS\Meshes\
TextureDir : C:\Users\Christian\Downloads\Orbiter 2016 STS\Textures\
HightexDir : C:\Users\Christian\Downloads\Orbiter 2016 STS\Textures2\
ScenarioDir: C:\Users\Christian\Downloads\Orbiter 2016 STS\Scenarios\
000000.000: ---------------------------------------------------------------
D3D9 DLLs : C:\WINDOWS\SYSTEM32\d3dx9_43.dll [v 9.29.952.3111]
: C:\WINDOWS\SYSTEM32\d3d9.dll [v 10.0.22000.120]
000000.000: ---------------------------------------------------------------
000000.000: Module D3D9Client.dll ........ [Build 210805, API 160828]
000000.000: Module GenericCamera.dll ..... [Build 210805, API 160828]
000000.000: Module DX9ExtMFD.dll ......... [Build 210805, API 160828]
000000.000: Module CameraMFD.dll ......... [Build 201106, API 160828]
000000.000:
000000.000: **** Creating simulation session
000000.000: D3D9: [DirectX 9 Initialized]
D3D9: 3D-Adapter.............. : Intel(R) UHD Graphics
D3D9: MaxTextureWidth......... : 8192
D3D9: MaxTextureHeight........ : 8192
D3D9: MaxTextureRepeat........ : 8192
D3D9: VolTexAddressCaps....... : 0x3F
D3D9: NumSimultaneousRTs...... : 4
D3D9: VertexDeclCaps.......... : 0x37F
D3D9: MiscCaps................ : 0x2FCCF2
D3D9: XNA Math Support........ : Yes
D3D9: Vertex Texture.......... : Yes
D3D9: Separate AlphaBlend..... : Yes
D3D9: Shadow Mapping.......... : Yes
D3D9: D3DFMT_A16B16G16R16F.... : Yes
D3D9: D3DFMT_A32B32G32R32F.... : Yes
D3D9: D3DFMT_D32F_LOCKABLE.... : No
D3D9: D3DFMT_A2R10G10B10...... : Yes
D3D9: D3DFMT_L8............... : Yes
D3D9: D3DDTCAPS_DEC3N......... : No
D3D9: D3DDTCAPS_FLOAT16_2..... : Yes
D3D9: D3DDTCAPS_FLOAT16_4..... : Yes
D3D9: Runs under WINE......... : No
D3D9: D3D9Build Date.......... : 210805
D3D9: Available Texture Memory : 4090 MB
000000.000: D3D9: [3DDevice Initialized]
000000.000: D3D9: [Loading Constellations]
000000.000: D3D9: [D3D9Client Initialized]
000000.000: Module Sun.dll ............... [Build 160828, API 160828]
VSOP87(E) Sun: Precision 1e-006, Terms 554/6634
000000.000: Module Mercury.dll ........... [Build 160828, API 160828]
VSOP87(B) Mercury: Precision 1e-005, Terms 167/7123
000000.000: Module Venus.dll ............. [Build 160828, API 160828]
000000.000: Module VenusAtm2006.dll ...... [Build 160828, API 160828]
VSOP87(B) Venus: Precision 1e-005, Terms 79/1710
000000.000: Module Earth.dll ............. [Build 160828, API 160828]
000000.000: Module EarthAtmJ71G.dll ...... [Build 160828, API 160828]
VSOP87(B) Earth: Precision 1e-008, Terms 2564/2564
============================ ERROR: ===========================
Parse error from base definition file for ZZA - Zaragoza: Block: TEXn: expected 3 values (*char, scalar, scalar)
[BaseObject:arseError | .\Baseobj.cpp | 184]
===============================================================
============================ ERROR: ===========================
Parse error from base definition file for ZZA - Zaragoza: Block: TEXn: expected 3 values (*char, scalar, scalar)
[BaseObject:arseError | .\Baseobj.cpp | 184]
===============================================================
000000.000: BaseObject: Parse error 2
000000.000: Module Moon.dll .............. [Build 160828, API 160828]
ELP82: Precision 1e-005, Terms 116/829
000000.000: Module Mars.dll .............. [Build 160828, API 160828]
000000.000: Module MarsAtm2006.dll ....... [Build 160828, API 160828]
VSOP87(B) Mars: Precision 1e-005, Terms 405/6400
000000.000: Module Phobos.dll ............ [Build ******, API 060425]
000000.000: Module Deimos.dll ............ [Build ******, API 060425]
000000.000: Module Galsat.dll ............ [Build 160828, API 160828]
000000.000: Module Jupiter.dll ........... [Build 160828, API 160828]
VSOP87(B) Jupiter: Precision 1e-006, Terms 1624/3625
000000.000: Module Io.dll ................ [Build 160828, API 160828]
000000.000: Module Europa.dll ............ [Build 160828, API 160828]
000000.000: Module Ganymede.dll .......... [Build 160828, API 160828]
000000.000: Module Callisto.dll .......... [Build 160828, API 160828]
000000.000: Module Satsat.dll ............ [Build 160828, API 160828]
000000.000: Module Saturn.dll ............ [Build 160828, API 160828]
VSOP87(B) Saturn: Precision 1e-006, Terms 2904/6365
000000.000: Module Mimas.dll ............. [Build 160828, API 160828]
SATSAT Mimas: Terms 113
000000.000: Module Enceladus.dll ......... [Build 160828, API 160828]
SATSAT Enceladus: Terms 33
000000.000: Module Tethys.dll ............ [Build 160828, API 160828]
SATSAT Tethys: Terms 101
000000.000: Module Dione.dll ............. [Build 160828, API 160828]
SATSAT Dione: Terms 59
000000.000: Module Rhea.dll .............. [Build 160828, API 160828]
SATSAT Rhea: Terms 68
000000.000: Module Titan.dll ............. [Build 160828, API 160828]
SATSAT Titan: Terms 100
000000.000: Module Iapetus.dll ........... [Build 160828, API 160828]
SATSAT Iapetus: Terms 605
000000.000: Module Uranus.dll ............ [Build 160828, API 160828]
VSOP87(B) Uranus: Precision 1e-006, Terms 1827/5269
000000.000: Module Miranda.dll ........... [Build ******, API 060425]
000000.000: Module Ariel.dll ............. [Build ******, API 060425]
000000.000: Module Umbriel.dll ........... [Build ******, API 060425]
000000.000: Module Titania.dll ........... [Build ******, API 060425]
000000.000: Module Oberon.dll ............ [Build ******, API 060425]
000000.000: Module Neptune.dll ........... [Build 160828, API 160828]
VSOP87(B) Neptune: Precision 1e-006, Terms 391/2024
000000.000: Finished initialising world
000000.000: Module Multistage2015.dll .... [Build 170506, API 160828]
000000.000: Multistage Version: 170506
000000.000: Load State Started
000000.000: ET-1: Guidance File present: Config\Multistage2015\Guidance\guidance_shuttle_STS-1real.txt
000000.000: ET-1: Config File: C:\Users\Christian\Downloads\Orbiter 2016 STS\Config\Multistage2015\Space-Shuttle_STS-1Enew.ini
000000.000: ET-1: Number of stages in the ini file: 0
000000.000: ET-1: Number of boosters group in the ini file: 0
000000.000: ET-1: Number of Payloads in the ini file: 0
000000.000: ET-1: Stage n. 1 Engines Exhaust Added--> number of engines: 1 , diameter: 0.000, position x: 0.000 y: 0.000 z: -0.000
000000.000: Load State Terminated
000000.000: Module EmptyModule.dll ....... [Build 170505, API 160828]
000000.000: Module MS_Camera.dll ......... [Build 170505, API 160828]
000000.000: MS_Camera: Target Vessel Loaded->ET-1
000000.000: >>> ERROR: No vessel class configuration file found for:
============================ ERROR: ===========================
Shuttle2016BEARLY
[Vessel::OpenConfigFile | .\Vessel.cpp | 243]
===============================================================
000000.000: >>> TERMINATING <<<(THE SAME ERROR IM GETTING)

How am I supposed to get a Shuttle B early vessel even though that is the main problem?!

gattispilot · Jun 4, 2022

This is weird. In your config folder is the Shuttle2016early there? it should be in: Config\Vessels

When you try the scenario I attached earlier does it work?

Ericman832 · Jun 4, 2022

No i just checked an its not there so how am i supposed to add it there btw i cant use et-1 for MS2015 it is a error and it doesnt work

Project Space Transportation System 2016

Addon Developer

Member

Member

Addon Developer

Member

Addon Developer

Addon Developer

Member

Addon Developer

The Desktop Orbinaut

Addon Developer

Addon Developer

Member

Addon Developer

Member

Addon Developer

Attachments

Addon Developer

Member

Addon Developer

Member

Similar threads